What are the precautions and steps for handling the oxygen sensor?

The oxygen sensor is located in the exhaust manifold or pipe and can be accessed from under the hood. It has a permanently attached pigtail and connector that should not be removed or damaged. Keep the sensor clean and handle it gently. Do not use cleaning solvents on it. The silicone boot must be correctly installed to prevent melting and ensure proper operation. Warm the engine to at least 120 degrees F before removing the sensor. Disconnect the electrical connector and carefully unscrew the sensor from the exhaust manifold. Use a special anti-seize compound on the threads for future removal. Install the sensor, tighten it to 30 ft-lbs, and reconnect the electrical connector.

Genuine Pontiac Firebird Oxygen Sensor

Oxygen O2 Sensor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

6 Oxygen Sensors found

View related parts
Pontiac Firebird Sensor Asm,Heated Oxygen
Part Number: 19178958
- Other Name: SENSOR, Computer Control Sensors; Front Oxygen Sensor, Manifold, Oxygen Sensor
- Replaces: 25312203, 25178022, 25164488, 25312211
$58.92 MSRP: $122.36
You Save: $63.44 (52%)

Add to Cart
More Info
Fits the following Vehicles:
1997-2002 Pontiac Firebird | 2 DOOR, CONVERTIBLE, COUPE | 6 Cyl 3.8L
Less Info
View related parts
Pontiac Firebird Sensor Asm,Heated Oxygen
Part Number: 19178930
- Other Name: SENSOR, Computer Control Sensors; Front Oxygen Sensor, Oxygen Sensor
- Replaces: 25171579, 25312184, 25165313
$59.62 MSRP: $123.78
You Save: $64.16 (52%)

Add to Cart
More Info
Fits the following Vehicles:
1994-1997 Pontiac Firebird | 2 DOOR, CONVERTIBLE | 6 Cyl 3.8L, 8 Cyl 5.7L
Less Info
View related parts
Pontiac Firebird Sensor Asm,Heated Oxygen
Part Number: 19178924
- Other Name: SENSOR, Computer Control Sensors; Oxygen Sensor, Rear Oxygen Sensor
- Replaces: 25312207, 25161130, 12587214, 25312196, 25164983, 19178921
$65.12 MSRP: $135.22
You Save: $70.10 (52%)

Add to Cart
More Info
Fits the following Vehicles:
1996-2002 Pontiac Firebird | 2 DOOR, CONVERTIBLE, COUPE | 6 Cyl 3.8L, 8 Cyl 5.7L
Less Info
View related parts
Pontiac Firebird Sensor Asm,Heated Oxygen<Do Not Use, Contact Tech Specialist
Part Number: 19355308
- Other Name: SENSOR ASM,HTD OXY<DO NOT USE, CONTACT TECH SPECIALIST; Oxygen Sensor
- Replaces: 19178928, 25161131, 25312197
$61.32 MSRP: $127.32
You Save: $66.00 (52%)

Add to Cart
More Info
Fits the following Vehicles:
1998-2002 Pontiac Firebird | 2 DOOR, CONVERTIBLE, COUPE | 8 Cyl 5.7L
Less Info
View related parts
Pontiac Firebird Sensor,Exhaust Oxygen
Part Number: 19211437
- Other Name: SENSOR, Computer Control Sensors; Oxygen Sensor
- Replaces: 19178952, 25162600, 25106073, 25132068, 25166816, 25171574, 25107378, 25162693, 25165118, 25171581, 25165120, 25171573, 19178943, 19178953, 19178919, 25162753, 25133185, 25133076
$15.80 MSRP: $33.26
You Save: $17.46 (53%)

Add to Cart
More Info
Fits the following Vehicles:
1982-1995 Pontiac Firebird | 2 DOOR, CONVERTIBLE | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.0L, 8 Cyl 5.7L
Less Info
View related parts
Pontiac Firebird Sensor Asm,Heated Oxygen
Part Number: 19178937
- Other Name: SENSOR, Computer Control Sensors; Oxygen Sensor
- Replaces: 25133791, 25312188
More Info
Fits the following Vehicles:
1995 Pontiac Firebird | 2 DOOR, CONVERTIBLE | 6 Cyl 3.8L
Less Info

Pontiac Firebird Oxygen Sensor Parts Questions & Answers

Sensor,Exhaust Oxygen
19211437
Q: What are the precautions and steps for handling the oxygen sensor?
A: The oxygen sensor is located in the exhaust manifold or pipe and can be accessed from under the hood. It has a permanently attached pigtail and connector that should not be removed or damaged. Keep the sensor clean and handle it gently. Do not use cleaning solvents on it. The silicone boot must be correctly installed to prevent melting and ensure proper operation. Warm the engine to at least 120 degrees F before removing the sensor. Disconnect the electrical connector and carefully unscrew the sensor from the exhaust manifold. Use a special anti-seize compound on the threads for future removal. Install the sensor, tighten it to 30 ft-lbs, and reconnect the electrical connector.