How do you remove and replace the leaf springs and Leaf Spring Shackle on Chevrolet Blazer,S10,GMC Jimmy and Sonoma?

To remove and replace the leaf springs on a vehicle, start by raising the rear of the vehicle and supporting it securely on jack stands. Block the front wheels to prevent the vehicle from rolling off the stands. Use a floor jack to support the axle and raise it slightly to relieve tension on the leaf springs. Remove the four U-bolt nuts and washers, followed by the anchor plate and U-bolts with a spacer. Raise the axle slightly off the springs with the floor jack. If the spring will be removed for an extended period, support the axle with jack stands. To reinstall, reverse the removal steps, gradually tightening the U-bolt nuts in a crisscross pattern and then tightening all fasteners to the specified torque. If the bushings at the ends of the spring are worn or deteriorated, they can be pressed out and replaced with new ones.

Genuine Chevrolet Blazer Leaf Spring Shackle

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

4 Leaf Spring Shackles found

View related parts
Chevrolet Blazer Shackle Kit,Rear Spring
Part Number: 15665302
- Other Name: SHACKLE, Rear Spring; Shackle, Spring Shackle
- Position: Rear
$44.86 MSRP: $89.00
You Save: $44.14 (50%)

Add to Cart
More Info
Fits the following Vehicles:
1995-2005 Chevrolet Blazer | 2 DOOR, 4 DOOR | 6 Cyl 4.3L
Less Info
View related parts
Chevrolet Blazer Shackle Assembly, Rear Spring
Part Number: 84232565
- Other Name: Shackle Assembly, Rear Spr; Leaf Spring Shackle, Shackle, Spring Shackle
- Position: Rear
- Replaces: 15640442, 25824312, 23286144
$34.61 MSRP: $65.30
You Save: $30.69 (47%)

Add to Cart
More Info
Fits the following Vehicles:
1992-1994 Chevrolet Blazer | 1/2 TON | 6 Cyl 4.3L, 8 Cyl 5.7L, 8 Cyl 6.5L Diesel
Less Info
View related parts
Chevrolet Blazer Shackle Kit, Front Spring
Part Number: 15576190
- Other Name: SHACKLE, Front Spring
- Position: Front
More Info
Fits the following Vehicles:
1985-1991 Chevrolet Blazer | 1/2 TON | 6 Cyl 2.8L, 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel
Less Info
View related parts
Chevrolet Blazer Shackle Assembly, Rear Spring
Part Number: 15726312
- Other Name: SHACKLE, Rear Spring; Shackle
- Position: Rear
- Replaces: 14022597
More Info
Fits the following Vehicles:
1985-1991 Chevrolet Blazer | 1/2 TON | 6 Cyl 2.8L, 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel
Less Info

Chevrolet Blazer Leaf Spring Shackle Parts Questions & Answers

Shackle Kit,Rear Spring
15665302
Q: How do you remove and replace the leaf springs and Leaf Spring Shackle on Chevrolet Blazer,S10,GMC Jimmy and Sonoma?
A: To remove and replace the leaf springs on a vehicle, start by raising the rear of the vehicle and supporting it securely on jack stands. Block the front wheels to prevent the vehicle from rolling off the stands. Use a floor jack to support the axle and raise it slightly to relieve tension on the leaf springs. Remove the four U-bolt nuts and washers, followed by the anchor plate and U-bolts with a spacer. Raise the axle slightly off the springs with the floor jack. If the spring will be removed for an extended period, support the axle with jack stands. To reinstall, reverse the removal steps, gradually tightening the U-bolt nuts in a crisscross pattern and then tightening all fasteners to the specified torque. If the bushings at the ends of the spring are worn or deteriorated, they can be pressed out and replaced with new ones.