How do you remove the driveaxle oil seal?

To remove the wheel seal, start by raising the rear of the vehicle and supporting it securely on jackstands. Place the transmission in Neutral with the parking brake off and block the front wheels to prevent the vehicle from rolling. Next, remove the driveaxle(s) and carefully pry out the wheel seal using a seal removal tool or a large screwdriver, being careful not to damage or scratch the seal bore. To install the new seal, use a seal installer or a large deep socket as a drift and drive it into the bore squarely, ensuring it is completely seated. Lubricate the lip of the new seal with multi-purpose grease and then install the rear driveaxle(s), being careful not to damage the lip of the new seal. Finally, check the differential lubricant level and add some, if necessary, to bring it to the appropriate level.

Genuine Chevrolet Camaro Wheel Seal

Wheel Axle Seal

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

11 Wheel Seals found

View related parts
Chevrolet Camaro Seal Assembly, Front Wheel Inner Bearing
Part Number: 3965092
- Other Name: SEAL, Front Wheel Bearing
- Position: Front Inner
$6.24 MSRP: $11.35
You Save: $5.11 (46%)

Add to Cart
More Info
Fits the following Vehicles:
1982-1992 Chevrolet Camaro | 2 DOOR, 4 DOOR, RS 2 DOOR, RS CONVERTIBLE | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 8 Cyl 5.0L, 8 Cyl 5.7L
Less Info
View related parts
Chevrolet Camaro Seal,Rear Wheel Bearing
Part Number: 554631
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub
- Position: Rear
$10.97 MSRP: $20.71
You Save: $9.74 (48%)

Add to Cart
More Info
Fits the following Vehicles:
1982-1992 Chevrolet Camaro | 2 DOOR, 4 DOOR, RS 2 DOOR, RS CONVERTIBLE | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 8 Cyl 5.0L, 8 Cyl 5.7L
Less Info
View related parts
Chevrolet Camaro Seal,Rear Wheel Bearing
Part Number: 26029139
- Other Name: SEAL, Rear Wheel Bearing Oil; Axle Seal, Bearing Seal, Wheel Bearing Seal
- Position: Rear
$11.71 MSRP: $22.09
You Save: $10.38 (47%)

Add to Cart
More Info
Fits the following Vehicles:
1993-2002 Chevrolet Camaro | 2 DOOR, CONVERTIBLE | 6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.7L
Less Info
View related parts
Chevrolet Camaro Seal,Rear Axle Shaft
Part Number: 92230580
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub; Axle Seal
- Position: Rear
$9.31 MSRP: $17.56
You Save: $8.25 (47%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2015 Chevrolet Camaro | 2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE, SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L, 8 Cyl 7.0L
Less Info
View related parts
Chevrolet Camaro Seal,Steering Linkage Outer Tie Rod
Part Number: 26049394
- Other Name: SEAL, Steering Tie Rod
- Position: Outer
- Replaces: 7828084, 07828084
$8.69 MSRP: $20.46
You Save: $11.77 (58%)

Add to Cart
More Info
Fits the following Vehicles:
1993-2002 Chevrolet Camaro | 2 DOOR, CONVERTIBLE | 6 Cyl 3.4L, 6 Cyl 3.8L, 8 Cyl 5.7L
Less Info
View related parts
Chevrolet Camaro Seal Assembly, Rear Axle Shaft
Part Number: 92230620
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub; Axle Seal
- Position: Rear
- Replaces: 22952051
$11.83 MSRP: $21.22
You Save: $9.39 (45%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2015 Chevrolet Camaro | 2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L, 8 Cyl 7.0L
Less Info
View related parts
Chevrolet Camaro Seal Assembly, Rear Axle Shaft
Part Number: 23417955
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub; Axle Seal, Seal
- Position: Rear
- Replaced by: 86827962
$30.70 MSRP: $57.92
You Save: $27.22 (47%)

Add to Cart
More Info
Fits the following Vehicles:
2016-2022 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2LT, 2 DOOR CONVERTIBLE 2SS, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2LT, 2 DOOR COUPE 2SS | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Less Info
View related parts
Chevrolet Camaro Seal Assembly, Rear Axle Shaft
Part Number: 23286128
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub; Axle Seal
- Position: Rear
- Replaces: 23154584
$35.08 MSRP: $69.61
You Save: $34.53 (50%)

Add to Cart
More Info
Fits the following Vehicles:
2017-2022 Chevrolet Camaro | 2 DOOR COUPE 1SS, 2 DOOR COUPE 2SS, 2 DOOR COUPE HIGH PERFORMANCE | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Less Info
View related parts
Chevrolet Camaro Seal Assembly, Rear Axle Shaft
Part Number: 20964013
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub; Axle Seal
- Position: Rear
More Info
Fits the following Vehicles:
2012-2015 Chevrolet Camaro | SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 8 Cyl 6.2L
Less Info
View related parts
Chevrolet Camaro Seal Asm,Rear Wheel Bearing
Part Number: 10033593
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub; Axle Seal, Seal, Wheel Bearing Seal
- Position: Rear
More Info
Fits the following Vehicles:
1987-1990 Chevrolet Camaro | 2 DOOR, RS 2 DOOR, RS CONVERTIBLE | 6 Cyl 2.8L, 6 Cyl 3.1L, 8 Cyl 5.0L, 8 Cyl 5.7L
Less Info
View related parts
Chevrolet Camaro Seal Asm,Rear Wheel Bearing
Part Number: 10033594
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub; Axle Seal, Seal, Wheel Bearing Seal
- Position: Rear
More Info
Fits the following Vehicles:
1987-1990 Chevrolet Camaro | 2 DOOR, RS 2 DOOR, RS CONVERTIBLE | 6 Cyl 2.8L, 6 Cyl 3.1L, 8 Cyl 5.0L, 8 Cyl 5.7L
Less Info

Chevrolet Camaro Wheel Seal Parts Questions & Answers

Seal Assembly, Rear Axle Shaft
92230620
Q: How do you remove the driveaxle oil seal?
A: To remove the wheel seal, start by raising the rear of the vehicle and supporting it securely on jackstands. Place the transmission in Neutral with the parking brake off and block the front wheels to prevent the vehicle from rolling. Next, remove the driveaxle(s) and carefully pry out the wheel seal using a seal removal tool or a large screwdriver, being careful not to damage or scratch the seal bore. To install the new seal, use a seal installer or a large deep socket as a drift and drive it into the bore squarely, ensuring it is completely seated. Lubricate the lip of the new seal with multi-purpose grease and then install the rear driveaxle(s), being careful not to damage the lip of the new seal. Finally, check the differential lubricant level and add some, if necessary, to bring it to the appropriate level.