How do you remove the steering gear boot on Chevrolet Equinox and GMC Terrain?

To remove the rack and pinion boot, start by loosening the lug nuts and raising the vehicle securely on jack stands. Remove the wheel and then proceed to remove the tie-rod end and jam nut. Next, remove the rack and pinion boot clamps and slide off the boot. Apply grease from the supplied grease packet to the tie-rod and the inner end of the inside of the boot. To install the new boot, slide it into position on the rack and pinion until it seats in the groove on the housing and the groove in the steering rod. Install the clamps securely. Remove the tape and proceed to install the tie-rod end. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.

Genuine Chevrolet Equinox Rack and Pinion Boot

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

5 Rack and Pinion Boots found

View related parts
Chevrolet Equinox Boot Kit,Steering Gear
Part Number: 19149838
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
$19.42 MSRP: $32.14
You Save: $12.72 (40%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2009 Chevrolet Equinox | SS SUV AWD, SS SUV FWD, SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.6L
Less Info
View related parts
Chevrolet Equinox Boot Kit,Steering Gear
Part Number: 19209363
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
$119.36 MSRP: $190.37
You Save: $71.01 (38%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2017 Chevrolet Equinox | LS SUV, LT SUV, LTZ SUV | 4 Cyl 2.4L
Less Info
View related parts
Chevrolet Equinox Boot Kit, Steering Gear
Part Number: 23479355
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
$22.56 MSRP: $36.00
You Save: $13.44 (38%)

Add to Cart
More Info
Fits the following Vehicles:
2018-2021 Chevrolet Equinox | 4 DOOR BASE (GMNA), 4 DOOR LT (GMNA), 4 DOOR LTZ (GMNA) | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
Less Info
View related parts
Chevrolet Equinox Boot Kit, Steering Gear
Part Number: 15225591
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
More Info
Fits the following Vehicles:
2005-2009 Chevrolet Equinox | SS SUV AWD, SS SUV FWD, SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.4L
Less Info
View related parts
Chevrolet Equinox Boot Kit,Steering Gear
Part Number: 19210062
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
More Info
Fits the following Vehicles:
2010-2017 Chevrolet Equinox | LT SUV, LTZ SUV | 6 Cyl 3.0L, 6 Cyl 3.6L
Less Info

Chevrolet Equinox Rack and Pinion Boot Parts Questions & Answers

Boot Kit, Steering Gear
15225591
Q: How do you remove the steering gear boot on Chevrolet Equinox and GMC Terrain?
A: To remove the rack and pinion boot, start by loosening the lug nuts and raising the vehicle securely on jack stands. Remove the wheel and then proceed to remove the tie-rod end and jam nut. Next, remove the rack and pinion boot clamps and slide off the boot. Apply grease from the supplied grease packet to the tie-rod and the inner end of the inside of the boot. To install the new boot, slide it into position on the rack and pinion until it seats in the groove on the housing and the groove in the steering rod. Install the clamps securely. Remove the tape and proceed to install the tie-rod end. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.