How to remove and install a Brake Light Switch?

Disconnect the battery's negative cable. For 1988-1993 models, find the brake light switch at the top of the brake pedal, unplug its connector, and pull it off. On models that are only 1994 models, unplug the connector, remove the clip, slide the switch off the pedal, and detach it from the pushrod. To install, reverse the removal steps and check brake lights with assistance.

Genuine Chevrolet K1500 Brake Light Switch

Brake Lamp Switch

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Brake Light Switches found

View related parts
Chevrolet K1500 Switch,Stop Lamp
Part Number: 15961519
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch
$20.06 MSRP: $37.84
You Save: $17.78 (47%)

Add to Cart
More Info
Fits the following Vehicles:
1988-1993 Chevrolet K1500 | K1500 EXTENDED CAB LONG BOX, K1500 EXTENDED CAB STANDARD BOX, K1500 REGULAR CAB LONG BOX, K1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel
Less Info
View related parts
Chevrolet K1500 Switch,Stop Lamp
Part Number: 93801734
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch
- Replaces: 15732489, 12450076
$12.52 MSRP: $19.96
You Save: $7.44 (38%)

Add to Cart
More Info
Fits the following Vehicles:
1994-1999 Chevrolet K1500 | K1500 EXTENDED CAB LONG BOX, K1500 EXTENDED CAB STANDARD BOX, K1500 REGULAR CAB LONG BOX, K1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.5L Diesel
Less Info

Chevrolet K1500 Brake Light Switch Parts Questions & Answers

Switch,Stop Lamp
15961519
Q: How to remove and install a Brake Light Switch?
A: Disconnect the battery's negative cable. For 1988-1993 models, find the brake light switch at the top of the brake pedal, unplug its connector, and pull it off. On models that are only 1994 models, unplug the connector, remove the clip, slide the switch off the pedal, and detach it from the pushrod. To install, reverse the removal steps and check brake lights with assistance.