How do you remove the Tailgate Lift Support?

To remove the tailgate glass, begin by opening it and securely supporting it. Use a small screwdriver to detach the clip and slide the retaining pin out on the upper end of the tailgate glass strut. Pry off the retaining clip with a small screwdriver on the lower end of the strut and pry the lower end off the ball stud. Installation is the reverse of removal. To remove the tailgate, open it and support it securely. Pry off the retaining clips on the upper and lower ends of both struts by either prying or pulling sharply to detach the ends from the ball studs. Installation is the reverse of removal.

Genuine Chevrolet S10 Tailgate Lift Support

Liftgate Strut

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Tailgate Lift Supports found

View related parts
Chevrolet S10 Strut,End Gate Window
Part Number: 15688545
- Other Name: STRUT, End Gate Support; Support Rod
$31.55 MSRP: $63.63
You Save: $32.08 (51%)

Add to Cart
More Info
Fits the following Vehicles:
1983-1994 Chevrolet S10 | 2 DOOR, 4 DOOR | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
Less Info
View related parts
Chevrolet S10 Strut,End Gate Window
Part Number: 15688546
- Other Name: STRUT, End Gate Support; Support Rod
More Info
Fits the following Vehicles:
1983-1994 Chevrolet S10 | 2 DOOR, 4 DOOR | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
Less Info

Chevrolet S10 Tailgate Lift Support Parts Questions & Answers

Strut,End Gate Window
15688545
Q: How do you remove the Tailgate Lift Support?
A: To remove the tailgate glass, begin by opening it and securely supporting it. Use a small screwdriver to detach the clip and slide the retaining pin out on the upper end of the tailgate glass strut. Pry off the retaining clip with a small screwdriver on the lower end of the strut and pry the lower end off the ball stud. Installation is the reverse of removal. To remove the tailgate, open it and support it securely. Pry off the retaining clips on the upper and lower ends of both struts by either prying or pulling sharply to detach the ends from the ball studs. Installation is the reverse of removal.