How to remove and install a Headlight Bulb on Chevrolet Blazer,S10,GMC Jimmy and Sonoma?

To disconnect the negative cable from the battery, start by removing the radiator grille for sealed beam-type headlights. Then, carefully remove the retainer screws without disturbing the adjusting screws. Pull the headlight out enough to unplug the connector and remove the headlight. To install the headlight, plug the connector in, position the headlight, and secure it with the retainer and screws. For composite headlights, open the hood and remove the two headlight retainers to drop the assembly forward and down. Reach behind the assembly to turn the bulb holder counterclockwise and unplug it. To install, plug the new bulb assembly into the electrical connector, insert it into the receptacle, and rotate clockwise to lock it into place.

Genuine GMC Sonoma Headlight Bulb

Headlamp Bulb

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

7 Headlight Bulbs found

View related parts
GMC Sonoma Bulb Asm,Headlamp (Low Beam)(Trade #9006Ll)
Part Number: 1999357
- Other Name: BULB, Capsule/Headlamp/Fog Lamp; Headlamp Bulb, Lower Beam Bulb
- Replaced by: 19257054
$13.23 MSRP: $24.08
You Save: $10.85 (46%)

Add to Cart
More Info
Fits the following Vehicles:
2002-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
1994-1997 GMC Sonoma | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
Less Info
View related parts
GMC Sonoma Bulb,Front Turn Signal Lamp
Part Number: 9442399
- Other Name: BULB, Bulb
- Position: Front
$4.14 MSRP: $7.42
You Save: $3.28 (45%)

Add to Cart
More Info
Fits the following Vehicles:
1996 GMC Sonoma | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
Less Info
View related parts
GMC Sonoma Bulb,Headlamp(High Beam)
Part Number: 1999437
- Other Name: BULB, Capsule/Headlamp/Fog Lamp; Headlamp Bulb, High Beam Bulb, Lower Beam Bulb
$12.27 MSRP: $23.17
You Save: $10.90 (48%)

Add to Cart
More Info
Fits the following Vehicles:
1994-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
Less Info
View related parts
GMC Sonoma Bulb Asm,Headlamp (Low Beam)
Part Number: 19257054
- Other Name: BULB, Capsule/Headlamp/Fog Lamp
- Replaces: 9441733, 01999357, 1999357, 1999366, 09441733, 12450177, 01999366
$13.41 MSRP: $24.08
You Save: $10.67 (45%)

Add to Cart
More Info
Fits the following Vehicles:
1994-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
Less Info
View related parts
GMC Sonoma Bulb,Headlamp(High Beam)
Part Number: 9441732
- Other Name: BULB, Capsule/Headlamp/Fog Lamp
$13.10 MSRP: $23.52
You Save: $10.42 (45%)

Add to Cart
More Info
Fits the following Vehicles:
1994-2004 GMC Sonoma | 4 DOOR, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
Less Info
View related parts
GMC Sonoma Headlamp Bulb
Part Number: 16502973
- Other Name: Bulb,Headlamp; Headlamp, Sealed Beam
- Replaces: 16512621
More Info
Fits the following Vehicles:
1994-1997 GMC Sonoma | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
Less Info
View related parts
GMC Sonoma BULB, Capsule/Headlamp/Fog Lamp
Part Number: 16504559
- Other Name: Sealed Beam
More Info
Fits the following Vehicles:
1996 GMC Sonoma | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
Less Info

GMC Sonoma Headlight Bulb Parts Questions & Answers

Bulb,Front Turn Signal Lamp
9442399
Q: How to remove and install a Headlight Bulb on Chevrolet Blazer,S10,GMC Jimmy and Sonoma?
A: To disconnect the negative cable from the battery, start by removing the radiator grille for sealed beam-type Headlights. Then, carefully remove the retainer screws without disturbing the adjusting screws. Pull the headlight out enough to unplug the connector and remove the headlight. To install the headlight, plug the connector in, position the headlight, and secure it with the retainer and screws. For composite headlights, open the hood and remove the two headlight retainers to drop the assembly forward and down. Reach behind the assembly to turn the bulb holder counterclockwise and unplug it. To install, plug the new bulb assembly into the electrical connector, insert it into the receptacle, and rotate clockwise to lock it into place.