How to replace the fuel pressure sensor and fuel pump flow control module on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To replace the fuel pressure sensor, relieve the fuel system pressure, lift the vehicle onto jackstands, and disconnect the sensor's electrical connector. Unscrew the old sensor, discard its o-ring, and fit a new oiled o-ring onto the new sensor. Reinstall in reverse order, ensuring the sensor is tight. Before lowering, test for leaks by toggling the ignition switch to ON for two seconds, OFF for ten seconds, and back to ON, checking for any leaks around the sensor. For the fuel pump driver module, elevate the vehicle, disconnect its electrical connector, remove three mounting bolts, and extract the module. Reverse the process to install.

Genuine GMC Yukon Fuel Pump Driver Module

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

4 Fuel Pump Driver Modules found

View related parts
GMC Yukon Fuel Pump Flow Control Module
Part Number: 20759945
- Other Name: Module,Fuel Pump Flow Control; Control Module, Module
- Replaces: 25854536, 13501024, 20850907, 25967325, 25785013, 15213110
$172.54 MSRP: $362.46
You Save: $189.92 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2009 GMC Yukon | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
Less Info
View related parts
GMC Yukon Fuel Pump Flow Control Module
Part Number: 20877116
- Other Name: Module,Fuel Pump Flow Control; Control Module, Module
- Replaces: 20850927, 20791901, 20827745
$114.76 MSRP: $241.08
You Save: $126.32 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2012 GMC Yukon | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 5.3L Flex, 8 Cyl 6.0L Flex, 8 Cyl 6.2L Flex
Less Info
View related parts
GMC Yukon Fuel Pump Flow Control Module Assembly
Part Number: 20898936
- Other Name: Module Assembly, Fuel Pump Flow Control; Control Module
$105.85 MSRP: $222.38
You Save: $116.53 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2012 GMC Yukon | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 5.3L Flex, 8 Cyl 6.0L Flex, 8 Cyl 6.2L Flex
Less Info
View related parts
GMC Yukon Fuel Pump Power Control Module Assembly
Part Number: 23382215
- Other Name: Module Assembly, Fuel Pump Power Control; Control Module, Fuel Pump Controller, Module
- Replaces: 23184800, 23199128, 23482843, 20856290
$68.16 MSRP: $143.21
You Save: $75.05 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2015-2020 GMC Yukon | 1500 4 DOOR, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY | 8 Cyl 5.3L, 8 Cyl 6.2L
Less Info

GMC Yukon Fuel Pump Driver Module Parts Questions & Answers

Fuel Pump Flow Control Module
20759945
Q: How to replace the fuel pressure sensor and fuel pump flow control module on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To replace the fuel pressure sensor, relieve the fuel system pressure, lift the vehicle onto jackstands, and disconnect the sensor's electrical connector. Unscrew the old sensor, discard its o-ring, and fit a new oiled o-ring onto the new sensor. Reinstall in reverse order, ensuring the sensor is tight. Before lowering, test for leaks by toggling the ignition switch to ON for two seconds, OFF for ten seconds, and back to ON, checking for any leaks around the sensor. For the fuel pump driver module, elevate the vehicle, disconnect its electrical connector, remove three mounting bolts, and extract the module. Reverse the process to install.