How do you remove the control assembly in Saturn LS and LS1?

To remove the A/C switch in a vehicle, start by disconnecting the cable from the negative battery terminal. Then, remove the dashboard center trim panel and the radio. Next, remove the retaining screws for the A/C switch assembly and rotate it to access the backside. Disconnect the A/C switch assembly electrical connectors. For manual A/C switch assembly, turn the temperature knob to the full hot position and release the temperature cable by pushing the tab forward while simultaneously pushing down on the cable. Remove the temperature cable eyelet by squeezing the drive pin and lifting. For both manual and automatic A/C switch installation, simply reverse the steps of removal and reconnect the battery.

Genuine Saturn LS1 A/C Switch

Air Conditioning Switch

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 A/C Switches found

View related parts
Saturn LS1 Knob Assembly Heater & Air Conditioner Control Blade
Part Number: 90583345
- Other Name: Knob Asm,Heater & A/C Control Blower Switch ; Knob, A/C Control
$60.78 MSRP: $83.03
You Save: $22.25 (27%)

Add to Cart
More Info
Fits the following Vehicles:
2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L
Less Info
View related parts
Saturn LS1 Blower Motor Switch Assembly
Part Number: 90586835
- Other Name: Switch Asm,Blower Motor ; Knob, A/C Control; Blower Motor Switch
More Info
Fits the following Vehicles:
2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L
Less Info
View related parts
Saturn LS1 Heater & Air Conditioner Control Assembly
Part Number: 22703512
- Other Name: Control Asm,Heater & A/C; Dash Control Unit
More Info
Fits the following Vehicles:
2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L
Less Info

Saturn LS1 A/C Switch Parts Questions & Answers

Heater & Air Conditioner Control Assembly
22703512
Q: How do you remove the control assembly in Saturn LS and LS1?
A: To remove the A/C switch in a vehicle, start by disconnecting the cable from the negative battery terminal. Then, remove the dashboard center trim panel and the radio. Next, remove the retaining screws for the A/C switch assembly and rotate it to access the backside. Disconnect the A/C switch assembly electrical connectors. For manual A/C switch assembly, turn the temperature knob to the full hot position and release the temperature cable by pushing the tab forward while simultaneously pushing down on the cable. Remove the temperature cable eyelet by squeezing the drive pin and lifting. For both manual and automatic A/C switch installation, simply reverse the steps of removal and reconnect the battery.