Parts for:

 
  Cart: 0 item

Customer Support:  Customer Service - Live Chat Live Chat or Customer Service - Phone 1-888-737-9766

Parts found for 1989 Chevrolet Beretta > Engine > Engine Assembly

Part No.
Part Description

Retail
Price

Your
Price

Qty. Cart

  •  
    ARM KIT, Engine Valve Rocker Make Sure These Fit  
  • ARM KIT, W/BALL VALVE ROCKER
    $18.50
    $11.80
  • ARM KIT, VALVE ROCKER(W/BALL), W/BALL VALVE ROCKER
    $14.84
    $9.48
  •  
    BOLT, Engine Camshaft & Valve Rocker Cover Make Sure These Fit  
  • BOLT, VALVE ROCKER COVER
    $8.59
    $5.49
  • BOLT, VALVE ROCKER COVER (1988-89)
    $5.88
    $3.75
  •  
    BOLT, Engine Cylinder Head Make Sure These Fit  
  • BOLT, CYL HEAD (M11X1.5X88) 10.9 PHOSPHATE ZINC ORGANIC
    $8.76
    $5.59
  • BOLT, CYL HEAD SHT(M11X1.5X98)
    $6.33
    $4.04
  • BOLT, SPECIAL (M11X1.5X130)(5)
    $6.33
    $4.04
  • BOLT, CYL HEAD LG (M11X1.5X108) 10.9 PHOSPHATE ZINC ORGANIC
    $8.76
    $5.59
  • BOLT, CYL HEAD SHT(M11X1.5X88)
    $8.76
    $5.59
  •  
    BOLT, Engine Main Bearing Cap Make Sure These Fit  
  • BOLT, CRANKSHAFT BEARING CAP
    --
    --
  • BOLT, CRANKSHAFT BEARING CAP
    Replaced by: 10131052
    $1.62
    $1.03
  •  
    BOLT, Intake & Exhaust Manifold Make Sure These Fit  
  • BOLT, EXHAUST MANIFOLD(M8X1.25X40)
    --
    --
  • BOLT, INTAKE MANIFOLD LOWER(M8X1.25X60)
    $3.93
    $2.51
  • BOLT, MANIFOLD(M8X1.25X40)(AS REQUIRED)
    --
    --
  • BOLT, INTAKE MANIFOLD PLENUM
    $1.28
    $0.82
  •  
    CAP, Engine Valve Spring Make Sure These Fit  
  • CAP, VALVE SPRING
    $4.00
    $2.55
  • CAP, VALVE SPRING
    --
    --
  •  
    CHAIN, Engine Timing Make Sure These Fit  
  • CHAIN, CAMSHAFT TIMING
    $74.42
    $47.51
  • CHAIN, CAMSHAFT TIMING
    $89.26
    $56.99
  •  
    CLAMP, Air Cleaner and Silencer Make Sure These Fit  
  • CLAMP, AIR CLEANER OUTLET DUCT (2.81 TO 3.75)
    $10.31
    $6.93
  • CLAMP, AIR CLEANER OUTLET DUCT (3.31 TO 4.25)
    Replaced by: 1638566
    $10.10
    $6.45
  •  
    CORD, Engine Coolant Heater Make Sure These Fit  
  • CORD, BLOCK HEATER
    $47.14
    $30.09
  • CORD, ENGINE BLOCK HEATER
    $65.50
    $41.81
  •  
    COVER, Engine Camshaft & Balance Shaft Hole Make Sure These Fit  
  • COVER, CAMSHAFT REAR
    --
    --
  • COVER, CAMSHAFT REAR
    --
    --
  •  
    DRIVE, Engine Oil Pump Make Sure These Fit  
  • DRIVE, OIL PUMP
    $121.90
    $77.82
  • DRIVE, OIL PUMP
    $86.07
    $54.95
  •  
    FILLER, Engine Coolant Make Sure These Fit  
  • FILLER, ENGINE COOLING(1ST DESIGN)(1987)(*03)
    --
    --
  • FILLER, ENGINE COOLING(2ND DESIGN)(1988)(*04)
    --
    --
  •  
    GASKET, Engine Cylinder Head Make Sure These Fit  
  • GASKET, Cyl HEAD
    $37.20
    $23.76
  • GASKET, CYL HEAD(*01)
    $36.64
    $23.39
  •  
    GASKET, Engine Oil Filter Make Sure These Fit  
  • GASKET, OIL FILTER ADAPTER
    --
    --
  • GASKET, OIL FILTER ADAPTER(1 RETAINER HOLE)
    --
    --
  •  
    HARNESS, Distributor (also Knock Sensor) Make Sure These Fit  
  • HARNESS, CRANKSHAFT POSITION SENSOR WIRING
    $27.89
    $15.61
  • HARNESS, CRANKSHAFT POSITION SENSOR WIRING
    --
    --
  •  
    HEAD, Engine Cylinder Make Sure These Fit  
  • HEAD, Cyl
    $326.46
    $208.41
  • HEAD, CYL(COMPLETE)(MAY BLACK ENAMEL NECESSARY TO PLUG METAL TEMPERATURE SWITCH HOLE W/ 1/8-27 PIPE PLUG)(1)
    --
    --
  •  
    HOSE, Engine Coolant By-Pass Make Sure These Fit  
  • HOSE, ENGINE COOLING BY-PASS(2ND DESIGN)(1988)(*04)
    $11.08
    $7.08
  • HOSE, RADIATOR INLET
    $19.61
    $11.01
  •  
    HOSE, Engine Crankcase Ventilation Make Sure These Fit  
  • HOSE, CRANKCASE VENT
    $10.42
    $6.65
  • HOSE, CRANKCASE VENT(1988-89)
    $8.70
    $5.56
  •  
    LIFTER, Engine Valve Lifter Make Sure These Fit  
  • LIFTER, HYDRAULIC VALVE
    $15.86
    $10.12
  • LIFTER, VALVE (STD)(*05)
    $19.07
    $12.17
  •  
    NUT, Engine Valve Adjusting Make Sure These Fit  
  • NUT, VALVE ROCKER ARM
    $3.55
    $2.26
  • NUT, VALVE ROCKER ARM
    $2.23
    $1.42
  •  
    PIN, Engine Clutch Housing or Transmission Make Sure These Fit  
  • PIN, CLUTCH HOUSING
    $1.49
    $0.95
  • PIN, TRANS LINE UP/CLUTCH HOUSING
    $1.49
    $0.95
  •  
    PIPE, Engine Coolant By-Pass Make Sure These Fit  
  • PIPE, ENGINE COOLING BY-PASS(1ST DESIGN)(1987)(*03)
    --
    --
  • PIPE, ENGINE COOLING BY-PASS(2ND DESIGN)(1988)(*04)
    $61.09
    $39.00
  •  
    PIPE, Fuel Line Make Sure These Fit  
  • PIPE, FUEL INJECTION FUEL FEED
    $29.04
    $19.52
  • PIPE, FUEL INJECTION FUEL RETURN
    --
    --
  • PIPE, FUEL FEED/ATCH TO FUEL INJECTION RAIL
    --
    --
  • PIPE, FUEL RETURN/ATCH TO FUEL INJECTION RAIL
    $11.95
    $8.03
  •  
    PISTON, Engine Piston Make Sure These Fit  
  • PISTON, W/PINION(STD)(INCLUDES 9)(*02)
    $109.66
    $70.01
  • PISTON, W/PINION(STD)(*03)
    --
    --
  •  
    PLATE, Engine Clutch Driven(Friction Disc) Make Sure These Fit  
  • PLATE, CLUTCH DRIVEN
    $194.33
    $124.06
  • PLATE, CLUTCH DRIVEN
    --
    --
  •  
    PLATE, Engine Clutch(Pressure Plate) Make Sure These Fit  
  • PLATE, W/PLATE, CLUTCH PRESSURE
    $269.07
    $171.77
  • PLATE, CLUTCH PRESSURE(W/COVER)(STAMPED 14105685)(0.863)
    --
    --
  •  
    PLUG, Engine Block Make Sure These Fit  
  • PLUG, CYL & CASE WATER JACKET HOLE
    Replaced by: 11569584
    $4.72
    $3.01
  • PLUG, CYL CASE WATER JACKET HOLE
    Replaced by: 11569584
    $4.72
    $3.01
  •  
    PUMP, Engine Oil Pump Make Sure These Fit  
  • PUMP, OIL
    $203.61
    $129.99
  • PUMP, OIL(W/SCREEN)
    $238.59
    $152.32
  •  
    RETAINER, Engine Flywheel Make Sure These Fit  
  • RETAINER, FLYWHEEL (A.T.)
    $11.60
    $7.40
  • RETAINER, FLYWHEEL (W/A.T.)
    $11.60
    $7.40
  •  
    ROD, Engine Valve Push Rod Make Sure These Fit  
  • ROD, EXHAUST PUSH
    --
    --
  • ROD, PUSH
    $9.82
    $6.27
  • SCREW, Hexagon
    SCREW,HEXAGON W/FL WASHER M6X1X30 9.8 PHOSPHATE ORGANIC 12.5OD HRD POINT FULL THREAD(AS REQUIRED)
    --
    --
  •  
    SEAL, Engine Crankcase Make Sure These Fit  
  • SEAL, CRANKCASE VENT VALVE BOTTOM
    $4.90
    $3.14
  • SEAL, CRANKCASE VENT VALVE CAP
    $3.77
    $2.41
  • SEAL, CRANKCASE VENT VALVE TOP
    $4.90
    $3.14
  • SEAL, OIL FILLER TUBE
    $7.52
    $4.79
  •  
    SEAL, Engine Front Cover & Crankshaft Seal Make Sure These Fit  
  • SEAL, CRANKSHAFT FRONT OIL
    $29.25
    $16.87
  • SEAL, CRANKSHAFT FRONT OIL(TIMING GEAR COVER)
    $29.25
    $16.87
  •  
    SEAL, Engine Valve Make Sure These Fit  
  • SEAL, EXHAUST VALVE STEM OIL
    --
    --
  • SEAL, INTAKE VALVE STEM OIL(*01)
    $8.77
    $5.60
  •  
    SEAL, Fuel Line Make Sure These Fit  
  • SEAL, FUEL FEED PIPE O RING
    $1.57
    $0.88
  • SEAL, FUEL RETURN PIPE O RING
    $4.41
    $2.46
  •  
    SEAT, Engine Valve Spring Make Sure These Fit  
  • SEAT, VALVE SPRING
    --
    --
  • SEAT, VALVE SPRING
    $3.84
    $2.45
  •  
    SENSOR, Computer Control Sensors Make Sure These Fit  
  • SENSOR, COOLANT TEMPERATURE (1.150)
    $34.78
    $19.45
  • SENSOR, EXHAUST OXYGEN(*02)
    $29.47
    $16.49
  • SENSOR, MANIFOLD AIR TEMPERATURE(STAMPED AC12V)(*02)
    $60.79
    $34.01
  • SENSOR, EXHAUST OXYGEN
    $29.47
    $16.49
  •  
    SENSOR, Distributor (also Knock Sensor) Make Sure These Fit  
  • SENSOR, ELECTRONIC SPARK CONTROL KNOCK
    $100.43
    $56.16
  • SENSOR, IGNITION TIMER
    $59.96
    $33.54
  • SENSOR, IGNITION TIMER (CRANKSHAFT POSITION)
    $59.96
    $33.54
  •  
    SHAFT, Engine Oil Pump Make Sure These Fit  
  • SHAFT, DISTRIBUTOR TO OIL PUMP INTERMEDIATE
    $14.23
    $9.07
  • SHAFT, DISTRIBUTOR TO OIL PUMP INTERMEDIATE
    $8.76
    $5.59
  •  
    SHIELD, Exhaust Manifold Make Sure These Fit  
  • SHIELD, EXHAUST MANIFOLD HEAT-LH (1989)
    --
    --
  • SHIELD, EXHAUST MANIFOLD HEAT-RH(1989)(*05)
    $26.37
    $16.83
  •  
    SPARK PLUG, Engine Tune-up(Spark,Glow) Make Sure These Fit  
  • SPARK PLUG, (FR 3LM,R44LTSM-8 PACKING)(DEALER TO BREAK DOWN AS REQUIRED)
    Replaced by: 19302729
    $2.98
    $1.67
  • SPARK PLUG, (R43LTSE)
    Replaced by: 19302729
    $2.98
    $1.67
  •  
    STUD, Accelerator Pedal Lever Make Sure These Fit  
  • STUD, ACCELERATOR CONTROL CABLE BRACKET(M8X1.25)(BOTH ENDS)
    --
    --
  • STUD, ACCELERATOR CONTROL CABLE BRACKET(M8X1.25 BOTH ENDS,45TL)(3.463)
    $3.84
    $2.45
  •  
    STUD, Engine Coolant Make Sure These Fit  
  • STUD, COOLANT OUTLET (0.724)
    $2.40
    $1.52
  • STUD, COOLANT OUTLET (M8X1.25X25/M8X1.25X47)
    $4.52
    $2.87
  •  
    STUD, Generator Mounting Make Sure These Fit  
  • STUD, GENERATOR BRACKET
    $3.93
    $2.51
  • STUD, GENERATOR BRACKET(M10X1.5X25/1.5X36)
    $3.93
    $2.51
  •  
    STUD, Ignition Coil Mounting Make Sure These Fit  
  • STUD, IGNITION COIL (0.206)
    $4.66
    $2.96
  • STUD, IGNITION COIL(M8X1.25X16 BOTH ENDS)(0.206)
    $4.66
    $2.96
  •  
    STUD, Intake & Exhaust Manifold Make Sure These Fit  
  • STUD, EXHAUST MANIFOLD(M8X1.25)
    $11.98
    $7.65
  • STUD, EXHAUST MANIFOLD-LH
    $11.12
    $7.09
  • STUD, EXHAUST MANIFOLD-RH
    --
    --
  • STUD, INTAKE MANIFOLD (M8X1.25X48)
    --
    --
  • STUD, INTAKE MANIFOLD (M8X1.25X65)
    $3.53
    $2.25
  • STUD, EXHAUST MANIFOLD(M6X1.0 X M8X1.25)
    $11.12
    $7.09
  • STUD, EXHAUST MANIFOLD-RH(M8X1.25X41.8/M6X1.0X13.0)(TL 62.8)
    --
    --
  •  
    SWITCH, Engine Oil Pressure/Temperature Make Sure These Fit  
  • SWITCH, FUEL PUMP(1988-89)(*03)
    $29.72
    $16.62
  • SWITCH, FUEL PUMP(1987)(*03)
    --
    --
  •  
    SWITCH, Fuel Pump Pressure Make Sure These Fit  
  • SWITCH, FUEL PUMP(1987-88)
    --
    --
  • SWITCH, FUEL PUMP & ENGINE OIL PRESSURE INDICATOR (1989)
    $29.17
    $16.31
  •  
    TUBE, Engine Crankcase Ventilation Make Sure These Fit  
  • TUBE, CRANKCASE VENT
    $17.32
    $11.05
  • TUBE, CRANKCASE VENT
    --
    --
  • TUBE, PCV(W/0 CONNECT)(PRESSES INTO LOWER INTAKE MANIFOLD)-(CRANKCASE VENT VALVE
    $16.54
    $10.56
  • TUBE, PCV(W/CONNECTORS-)(PLASTIC)(180.0 MM)-(CRANKCASE VENT VALVE
    $17.32
    $11.05
  •  
    TUBE, Engine Oil Level Make Sure These Fit  
  • TUBE, OIL LEVEL INDICATOR(1987-88)
    --
    --
  • TUBE, OIL LEVEL INDICATOR(1989)
    $19.09
    $12.19
  •  
    VALVE, Engine Crankcase Make Sure These Fit  
  • VALVE, CRANKCASE VENT
    --
    --
  • VALVE, CRANKCASE VENT (CV892C)
    --
    --
  •  
    VALVE, Exhaust Make Sure These Fit  
  • VALVE, EXHAUST STD(*03)
    $24.38
    $15.56
  • VALVE, EXHAUST(STD)(*05)
    $34.22
    $21.84
  •  
    Standard Parts Make Sure These Fit  
  • BOLT, HEX FLANGED HEAD (M10 1.5X50) PHOSPHATE ZINC ORGANIC
    $3.33
    $2.12
  • BOLT, M10X1.5X35(AS REQUIRED)
    $2.28
    $1.46
  • BOLT, M8X1.25X25 9.8(AS REQUIRED)
    --
    --
  • BOLT, (AS REQUIRED)(4.665)
    $4.40
    $2.81
  • BOLT, HEAVY HEXAGON HEAD,M8X1.25X12,18 O.D.,10.9,PHOSPHATE ZINC ORGANIC(AS REQUIRED)
    $5.88
    $3.75
  • BOLT, HEX FLANGED HEAD M10X1.5X20 9.8 PHOSPHATE ZINC ORGANIC(AS REQUIRED)
    --
    --
  • BOLT, HEX FLANGED HEAD M8X1.25X35 10.9 PHOSPHATE ZINC ORGANIC(AS REQUIRED)(6.525)
    $3.51
    $2.24
  • BOLT, HEX FLANGED HEAD W/CONICAL WASHER M8X1.25X20(AS REQUIRED)
    $5.73
    $3.65
  • BOLT, HEX FLANGED HEAD, M8X1.25X20,17THD,18 O.D.,10.9,7114M(AS REQUIRED)
    $1.55
    $1.00
  • BOLT, HEX FLANGED HEAD,8X1.25X100,9.8 PLATE STEEL,17.6-OUTSIDE DIAMETER, 30MM THREAD(AS REQUIRED)
    $2.22
    $1.41
  • BOLT, HEX FLANGED HEAD,M10X1.5X16,21.5 O.D.,MACHINE POINT,9.8,7114(AS REQUIRED)
    $4.39
    $2.80
  • BOLT, HEX FLANGED HEAD,M10X1.5X30,26THD,21.5O.D.,10.9,(AS REQUIRED)
    Replaced by: 11516328
    $3.37
    $2.15
  • BOLT, HEX FLANGED HEAD,M6X1X16, 10 THREAD, 14.2 OUTSIDE DIAMETER, 8.8 STEEL, GMW3359(AS REQUIRED)
    $4.37
    $2.79
  • BOLT, HEX FLANGED HEAD,M6X1X16,13.5 THREAD,14.2 OUTSIDE DIAMETER,GMW25 STEEL,GMW3200,MACHINE,HEADER POINT(AS REQUIRED)
    $0.74
    $0.47
  • BOLT, HEX FLANGED HEAD,M6X1X25,HEADER POINT,10.9,PLATE STEEL(AS REQUIRED)
    $5.20
    $3.32
  • BOLT, HEX FLANGED HEAD,M8X1.25X22,19 THREAD,18 OUTSIDE DIAMETER,10.9,GMW3359(AS REQUIRED)
    $1.98
    $1.14
  • BOLT, HEX FLANGED HEAD,M8X1.25X45,22THD,17 O.D.,9.8(AS REQUIRED)
    $8.45
    $5.40
  • BOLT, HEX FLANGED HEAD,REDUCED BODY,M10X1.5X40,30THD,22.3 O.D.,HEADER POINT,10.9,7114M(AS REQUIRED)
    $1.78
    $1.14
  • BOLT, HEXAGON W/CONICAL WASHER,M6X1X15,12.8 O.D.,9.8,PHOSPHATE ZINC ORGANIC(AS REQUIRED)
    $3.32
    $2.12
  • BOLT, HEXAGON W/WASHER 12.5 OUTSIDE DIAMETER,6.3X1.81X25,PHOSPHATE ORGANIC,6010M,ALUMINUM BASECOAT POINT,(AS REQUIRED)
    $5.15
    $3.28
  • BOLT, HEXAGON,M10X1.5X20,10.9,PHOSPHATE ORGANIC(AS REQUIRED)
    $2.26
    $1.44
  • BOLT, HEXAGON,M8X1.25X16,15 THREAD,18 O.D.,10.9,7114M(AS REQUIRED)(TOGETHER WITH 12345493 REPLCS 25534835)
    $5.88
    $3.75
  • BOLT, HEXAGON,M8X1.25X22,FULL THREAD,9.8,PHOSPHATE ORGANIC(AS REQUIRED)
    $2.16
    $1.38
  • BOLT, HEXAGON,M8X1.25X22,FULL THREAD,9.8,PHOSPHATE ORGANIC(CLUTCH COVER & PRESSURE PLATE)(AS REQUIRED)
    $2.16
    $1.38
  • BOLT, M6X1X13,10 THREAD,12.5 O.D.(AS REQUIRED)
    Replaced by: 11516477
    $7.55
    $4.82
  • BOLT, W/CONICAL AND SEALING WASHER,M6X1X25,21 O.D.,9.8,PHOSPHATE ZINC ORGANIC(AS REQUIRED)
    $1.56
    $1.00
  • CLAMP, WORM GEAR,1/2X13/16(AS REQUIRED)
    Replaced by: 11517127
    $4.38
    $2.95
  • CLAMP, WORM GEAR,14.22-26.92 DIAMETER, 13.25 THICK, STAINLESS STEEL.(AS REQUIRED)
    $3.48
    $2.22
  • CLAMP, WORM TYPE(11/16" TO 1 5/16")(AS REQUIRED)
    $4.40
    $2.95
  • CONDUIT, CONVOLUTED(1" INSIDE DIAMETER X15')R68423(AS REQUIRED)(*06)
    $67.20
    $42.90
  • KEY, WOODRUFF #9 .187X.750 PLAIN(AS REQUIRED)
    $0.90
    $0.57
  • NUT, HEX FLANGED HEAD,M10X1.5,11.2THK,21.5 O.D.,7111M(AS REQUIRED)
    $5.28
    $2.94
  • NUT, HEX FLANGED HEAD,M6X1,5.85THK,14.2 O.D.,10,ZINC ORGANIC(AS REQUIRED)
    $2.81
    $1.79
  • NUT, HEX FLANGED HEAD,M8X1.25,17.9 OUTSIDE DIAMETER,738 THICK,13MM HEXAGON,10, PHOSPHATE ZINC ORGANIC - FLAKE(AS REQUIRED)(8.915)
    $4.54
    $2.89
  • NUT, HEXAGON W/CONICAL WASHER,M6X1,5.7 THICK,16 OUTSIDE DIAMETER,9,GMW3200(AS REQUIRED)
    $0.57
    $0.37
  • NUT, HEXAGON W/CONICAL WASHER,M6X1X5.6,24 OUTSIDE DIAMETER,9,PHOSPHATE ZINC ORGANIC - FLAKE(AS REQUIRED)(8.917)
    $4.65
    $2.97
  • NUT, HEXAGON W/CONICAL WASHER,M8X1.25,10THK,19 O.D.,10,7111M(AS REQUIRED)(8.917)
    $1.08
    $0.68
  • NUT, STAMPED/DF/W-SEALER #10-24 ZC(AS REQUIRED)
    $4.41
    $2.46
  • PIN, GROOVE/F/.312X.375 CADMIUM OR ZINC PLATED (OPT); 0.375" LENGTH(AS REQUIRED)
    $0.89
    $0.56
  • PIN, M6X16,STEEL,PLAIN(AS REQUIRED)
    $4.66
    $2.96
  • PLUG, 3/8-18 DRY SEAL(AS REQUIRED)
    $5.54
    $3.53
  • PLUG, 1/4-18X0.56,STEEL,PC(AS REQUIRED)
    $10.35
    $5.80
  • PLUG, CYL & CASE OIL GALLERY HOLE/FRONT END
    $0.99
    $0.64
  • PLUG, EXPANSION(CUP),0.75 OUTSIDE DIAMETER,0.26 THICK,STAINLESS STEEL,PLAIN(AS REQUIRED)
    $3.72
    $2.37
  • PLUG, HEXAGON SOCKET,1/4-18X.69,DOG POINT(AS REQUIRED)
    --
    --
  • RTV T-330, 3 OUNCE. CARTRIDGE(AS REQUIRED)
    $12.73
    $8.12
  • SCREW, HEX WASHER HEAD,SELF TAP,M6.3X1.81X13,13.2 O.D.,6010M,PHOSPHATE ZINC ORGANIC(AS REQUIRED)
    $0.84
    $0.55
  • SEALANT, LOCTITE-518,50ML TUBE(AS REQUIRED)
    Replaced by: 19333510
    $34.20
    $19.15
  • STRAP, TIE 0.38" WIDTH,BUNDLE DIAMETER 1/16"-1-3/4", 8.27" LENGTH,NYLON 6/6 FITS 0.(AS REQUIRED)
    $1.19
    $0.76
  • WASHER, FL M6.5X18.8X1.5,GM6046M(AS REQUIRED)
    $2.09
    $1.33
  • WASHER, FLAT, 0.45" INSIDE DIAMETER, 1.75" OUTSIDE DIAMETER, 0.31" THICK, SAE 1010 STEEL, GMW3044(AS REQUIRED)
    $4.54
    $2.90