Parts for:

 
  Cart: 0 item

Customer Support:  Customer Service - Live Chat Live Chat or Customer Service - Phone 1-888-737-9766

Parts found for 1989 Chevrolet K2500 > Transmission - Manual > Manual Transmission Case & Related Parts

Part No.
Part Description

Retail
Price

Your
Price

Qty. Cart

  •  
    BEARING, Transmission Clutch Gear Make Sure These Fit  
  • BEARING, INPUT SHAFT (1991)(INCLUDE 215,216,217,218)
    $126.21
    $80.56
  • BEARING, INPUT SHAFT(1988-90)(INCLUDE 215,216,217,218)(*02)
    --
    --
  •  
    BEARING, Transmission Internal Shift Shaft Make Sure These Fit  
  • BEARING, DETENT PLUNGER (ALSO PART OF 200)
    --
    --
  • BEARING, SHIFT RAIL (1-2,3-4,5)(ALSO PART OF 301)
    $9.39
    $5.99
  •  
    BEARING, Transmission Main Drive Gear(Clutch) Make Sure These Fit  
  • BEARING, W/SLINGER, MAIN DRIVE GEAR (1988-89,1990 1ST DESIGN)(*KIT2)
    $133.46
    $74.74
  • BEARING, W/SLINGER, MAIN DRIVE GEAR (INCLUDE 42,44)(1990 2ND DESIGN,1991)(*KIT2)
    --
    $150.63
  •  
    BUSHING, Transmission Shift Shaft Detent Make Sure These Fit  
  • BUSHING, SHIFT SHAFT DETENT(5TH & REVERSE DETENT (ALSO PART OF 200)(2 REQUIRED)
    $8.32
    $5.31
  • BUSHING, SHIFT SHAFT DETENT(ALSO PART OF 200)(2 REQUIRED)
    $8.32
    $5.31
  •  
    GASKET, Transmission Main Drive Gear Bearing Retainer Make Sure These Fit  
  • GASKET, COUNTER GEAR FRONT BEARING CAP(*KIT1)
    --
    $16.30
  • GASKET, MAIN DRIVE GEAR BEARING RETAINER(*KIT1,KIT2)
    $2.97
    $1.90
  • GEAR, Trans Clutch
    GEAR,TRANS CLUTCH(17 TEETH)(1988-89,1990 1ST DESIGN)(MUST ALSO USE 08672405 BEARING & DISCARD OIL SLINGER)
    --
    --
  •  
    GEAR, Transmission Countershaft Make Sure These Fit  
  • GEAR, COUNTER
    $431.79
    $275.65
  • GEAR, 3RD COUNTER
    --
    --
  •  
    GEAR, Transmission First/Reverse Gear Make Sure These Fit  
  • GEAR, REVERSE
    --
    --
  • GEAR, W/PINION, 1ST SPEED
    --
    --
  •  
    HUB, Transmission Synchronizer Make Sure These Fit  
  • HUB, 1ST & 2ND SPEED CLUTCH
    --
    --
  • HUB, 3RD & 4TH SPEED CLUTCH
    $135.23
    $106.71
  •  
    PLUG, Engine Clutch Housing Make Sure These Fit  
  • PLUG, CLUTCH FORK ACCESS HOLE
    --
    --
  • PLUG, CLUTCH FORK ACCESS HOLE(1)(1988-91)K(1,2)(MG5)
    --
    --
  •  
    PLUG, Transmission Case Make Sure These Fit  
  • PLUG, MAGNETIC PIPE(*KIT2)
    --
    --
  • PLUG, OIL DRAIN (M24X1.5)
    $8.49
    $5.41
  • PLUG, VENT HOLE
    --
    $18.87
  • PLUG, TRANS OIL DRAIN(M24X1.5)(4.195)
    $8.49
    $5.41
  •  
    RETAINER, Input Shaft Bearing Make Sure These Fit  
  • RETAINER, INPUT SHAFT BEARING(1988-1990) (INCLUDE 206-208)
    --
    --
  • RETAINER, INPUT SHAFT BEARING(1991 W/CODES CAU,KMU,UEU,UJU,CCU,KDU,CHU)(INCLUDE 206-208)
    --
    --
  • RETAINER, INPUT SHAFT BEARING(1991 W/CODES UMU,UNU,UPU,URU,UXU,UYU,UZU)(INCLUDE 206-208)
    --
    --
  •  
    RING, Transmission Countershaft Gear Make Sure These Fit  
  • RING, CLUTCH COUNTER GEAR RETAINING (1.450X.28X.097)(*KIT2)
    $3.12
    $2.16
  • RING, COUNTER GEAR REAR BEARING RETAINING(*KIT2)
    $2.25
    $1.54
  • RING, COUNTER GEAR RETAINING(*KIT2)
    $3.12
    $2.16
  •  
    RING, Transmission Rear Bearing and Mainshaft Make Sure These Fit  
  • RING, MAIN DRIVE GEAR BEARING RETAINING (3.7 INCH DIAMETER)(*KIT2)
    $2.02
    $1.40
  • RING, MAIN SHAFT REAR BEARING RETAINING
    $2.25
    $1.54
  •  
    SEAL, Transmission Main Drive Make Sure These Fit  
  • SEAL, INPUT SHAFT OIL(*KIT1)
    $8.80
    $5.61
  • SEAL, MAIN DRIVE GEAR BEARING OIL(*KIT1,KIT2)
    --
    --
  •  
    SHAFT, Transmission Internal Shift Shaft Make Sure These Fit  
  • SHAFT, SHIFT (INCLUDE 117,119,121)
    --
    --
  • SHAFT, 1ST & 2ND SHIFT(INCLUDE 101,102,105)
    $133.53
    $93.38
  • SHAFT, 3RD & 4TH SHIFT(1988,1989 1ST DESIGN W/9KDU)(INCLUDE 107,108,109)
    --
    --
  • SHAFT, 3RD & 4TH SHIFT(1989 2ND DESIGN W/0KDU,1990-91)(INCLUDE 107,108,109)
    --
    --
  • SHAFT, SHIFT(PART OF 116)(MG5)
    --
    --
  •  
    SHAFT, Transmission Mainshaft Make Sure These Fit  
  • SHAFT, MAIN (32 TEETH OUTPUT)(K)
    --
    --
  • SHAFT, MAIN (35 TEETH OUTPUT)(C)
    $409.06
    $261.14
  •  
    SOCKET, Transmission Rail End Make Sure These Fit  
  • SOCKET, SHIFT SHAFT ACT (INCLUDE 124-128)(1988-90)
    $113.37
    $101.16
  • SOCKET, SHIFT SHAFT ACT (INCLUDE 124-128)(1991)
    --
    --
  •  
    SPRING, Transmission Internal Shift Make Sure These Fit  
  • SPRING, BIAS LOAD TORSION (1988,1989 1ST DESIGN W/9KDU)
    --
    --
  • SPRING, BIAS LOAD TORSION (1989-90 2ND DESIGN W/0KDU)
    --
    --
  • SPRING, BIAS LOAD TORSION (1991)
    --
    --
  •  
    SPRING, Transmission Synchronizer Make Sure These Fit  
  • SPRING, 1ST & 2ND SPEED CLUTCH KEY FRONT & REAR (2 REQUIRED)(*KIT2)
    --
    $15.54
  • SPRING, 3RD & 4TH SPEED CLUTCH KEY (2 REQUIRED)(*KIT2)
    $6.83
    $4.74
  •  
    TRANSMISSION, Manual Make Sure These Fit  
  • TRANSMISSION, MANUAL (CODE GKC)(SERVICE BY REMANUFACTURE TRAN)
    $1416.95
    $952.00
  • TRANSMISSION, MANUAL (REMANUFACTURE)(CODE 0KDU,9KDU,GKC)
    $1416.95
    $952.00
  • TRANSMISSION, MANUAL (REMANUFACTURE)(CODE 1UNU)
    $1416.95
    $952.00
  •  
    Standard Parts Make Sure These Fit  
  • ADHESIVE/SEALANT, THREADLOCKER HIGH STRENGTH 10ML ERI(ADHESIVE KIT, THREAD LOCK (10 ML)(AS REQUIRED))(AS REQUIRED)(89021297 SERVICED TOGETHER WITH BOLT 11517188)
    Replaced by: 19332211
    $19.76
    $11.07
  • BOLT, HEX FLANGED HEAD (3/8-16X5/8, 280M PHOSPHATE ORGANIC)(AS REQUIRED)
    $4.12
    $2.63
  • BOLT, HEXAGON (M10X1.5X25, 10.9 PHOSPHATE ORGANIC)(AS REQUIRED)
    $4.70
    $3.00
  • BOLT, HEXAGON (M6X1X20, 9.8 PHOSPHATE ZINC ORGANIC)(ALSO PART OF 237)(AS REQUIRED)
    $0.71
    $0.46
  • BOLT, HEXAGON (M6X1X25, 9.8 PHOSPHATE ZINC ORGANIC)(ALSO PART OF 237)(AS REQUIRED)
    $7.50
    $4.78
  • NUT, HEXAGON PRVG TORQUE (M10X1.5, 10 CADMIUM)(AS REQUIRED)
    $3.94
    $2.52
  • NUT, SPECIAL BEARING (1 9/16-18)(4 SLOTS)(ROUND)(AS REQUIRED)
    --
    --
  • PIN, DOWEL (3/8X7/8)
    --
    --
  • PIN, SHIFT LEVER PIVOT SPRING (5/16X3/4)(AS REQUIRED)
    $1.31
    $0.91
  • PLUG, (M12,3 THICK,STEEL,ZINC COATED (DIPPED OR PLATED))(AS REQUIRED)
    --
    $16.72
  • PLUG, CUP (15.15 OUTSIDE DIAMETER,5 THICK,STEEL,ZINC COATED (DIPPED OR PLATED))(AS REQUIRED)
    --
    --
  • PLUG, CUP (17OD,1 THICK,5 DEEP,1010 STEEL)(AS REQUIRED)
    --
    $15.79
  • PLUG, SQUARE HEAD FILL & DRAIN (1/2-14)(AS REQUIRED)(*KIT2)
    $4.66
    $2.96
  • SCREW, PAN HEAD SLOTTED (#10-24X3/8)(AS REQUIRED)
    --
    --
Genuine GM Parts, the Right Choice
GMPartsGiant.com offers the lowest prices for genuine 1989 Chevrolet K2500 parts. Parts like Manual Transmission Case & Related Parts are shipped directly from authorized GM dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 6 Cyl, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 7.4L. Model Code: 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CAB CHASSIS 135.5, 3500 CAB CHASSIS 159.9, 3500 EXTENDED CAB, 3500 REGULAR CAB.
 
Item has been added to your cart!

Part No.:

Qty.

Price: $0.00

Subtotal: $0.00

This part contains hazardous material.

This part is a packaged part and contains multiple quantities of: (Pack Qty: 4)

This part is a packaged part and contains multiple quantities of the same item. In an effort to simplify packaging GM will sometimes include multiple parts in a package.