Parts for:

 
  Cart: 0 item

Customer Support:  Customer Service - Live Chat Live Chat or Customer Service - Phone 1-888-737-9766

Parts found for 1989 Chevrolet K3500 > Transfer Case > Transfer Case

Part No.
Part Description

Retail
Price

Your
Price

Qty. Cart

  •  
    BOLT, Transfer Case Make Sure These Fit  
  • BOLT, INPUT BEARING RETAINER
    $1.98
    $1.14
  • BOLT, TRANSFER CASE (M10X1.5X35,31 THREAD)(1991 K2,3)
    Replaced by: 12345493
    $20.45
    $11.46
  • BOLT, TRANSFER CASE HALF (14 REQUIRED)
    $6.13
    $3.90
  • BOLT, TRANSFER CASE REAR EXTENSION(M10X1.5X35)
    $6.13
    $3.90
  •  
    BUSHING, Transfer Case Make Sure These Fit  
  • BUSHING, REAR OUTPUT SHAFT EXTENSION
    --
    --
  • BUSHING, TRANSFER CASE HIGH/LOW SHIFT FORK (ALSO PART OF 51)
    $6.92
    $4.41
  •  
    CARRIER, Transfer Case Make Sure These Fit  
  • CARRIER, COMPLETE (1990-91)
    --
    --
  • CARRIER, TRANSFER CASE HIGH/LOW PLANET(W/INPUT GEAR)
    --
    --
  •  
    CASE, Transfer case Make Sure These Fit  
  • CASE, TRANSFER (STAMPED DP)(1989-90)(INCLUDE 3 THROUGH 95)
    $2275.00
    $1783.60
  • CASE, TRANSFER (STAMPED FU)(1991)(INCLUDE 3 THROUGH 95)
    --
    --
  •  
    COVER, Transfer Case Make Sure These Fit  
  • COVER, OIL PUMP FRONT(ALSO PART OF 24)
    --
    --
  • COVER, TRANSFER CASE OIL PUMP HOUSING REAR(ALSO PART OF 24)
    --
    --
  •  
    DEFLECTOR, Universal Joint and Power Divider Make Sure These Fit  
  • DEFLECTOR, FRONT PROPELLER SHAFT YOKE
    $8.97
    $5.73
  • DEFLECTOR, TRANSFER CASE FRONT OUTPUT SHAFT SEAL (TO YOKE)(FRONT & REAR)
    --
    --
  •  
    GEAR, Transfer Case Make Sure These Fit  
  • GEAR, TRANSFER CASE HIGH/LOW INTAKE
    $229.74
    $146.73
  • GEAR, TRANSFER CASE POWER TAKE-OFF
    --
    --
  • GEAR, TRANSFER CASE INPUT (W/INPUT SHAFT)(1990 K1,2,3 PART TIME W/M20,M40)(INCLUDE 84)
    --
    --
  • GEAR, TRANSFER CASE INPUT (W/INPUT SHAFT)(K1,2 W/MANUAL TRANSMISSION)(1988-89 K3)(INCLUDE 83)
    --
    --
  • GEAR, TRANSFER CASE INPUT (W/INPUT SHAFT)(PART TIME W/MT1,MT8)(1991)
    --
    --
  • GEAR, TRANSFER CASE INPUT(1990-91 K1,2 W/AUTOMATIC TRANSMISSION MD8)(INCLUDE 84)
    --
    --
  •  
    NUT, Universal Joint Sleeve Yoke Make Sure These Fit  
  • NUT, FRONT OUTPUT PROPELLER SHAFT YOKE
    $12.23
    $7.80
  • NUT, TRANSFER CASE FRONT AXLE PROPELLER SHAFT YOKE
    --
    --
  • NUT, TRANSFER CASE FRONT AXLE PROPELLER SHAFT YOKE(FRONT)
    --
    --
  •  
    PAD, Transfer Case Make Sure These Fit  
  • PAD, MODE SHIFT FORK CENTER (PART OF 54)
    $1.96
    $1.24
  • PAD, RANGE & MODE SHIFT FORK (PART OF 51,54)
    $1.63
    $1.04
  • PAD, RANGE SHIFT FORK CENTER (PART OF 51)
    --
    --
  •  
    PIPE, Transfer Case Make Sure These Fit  
  • PIPE, TRANSFER CASE OIL PUMP SUCTION (TYPE 241C)
    --
    --
  • PIPE, TRANSFER CASE VENT (TYPE 241C)(PART TIME)
    $9.46
    $6.04
  •  
    PLUNGER, Transfer Case Internal Shift Control Make Sure These Fit  
  • PLUNGER, POPPET (1988-89)
    --
    --
  • PLUNGER, SHIFT DETENT (1990-91)
    $3.54
    $2.26
  •  
    RETAINER, Transfer Case Make Sure These Fit  
  • RETAINER, FRONT OUTPUT REAR BEARING
    $176.44
    $112.64
  • RETAINER, INPUT BEARING
    $55.70
    $35.56
  • RETAINER, OIL PUMP(ALSO PART OF 24)
    --
    --
  • RETAINER, TRANSFER CASE SHIFT DETENT LEVER (PUSH ON)
    $7.12
    $4.55
  • RETAINER, TRANSFER CASE REAR OUTPUT SHAFT REAR BEARING(UPC/FNA: RETAINER,TRANSFER CASE REAR OUTPUT SHAFT REAR BEARING MODIFIER: 1989-91 K309(53))
    --
    --
  • RETAINER, TRANSFER CASE REAR OUTPUT SHAFT REAR BEARING(UPC/FNA: RETAINER,TRANSFER CASE REAR OUTPUT SHAFT REAR BEARING MODIFIER: 1990 K314 EXCEPT F44)
    --
    --
  • RETAINER, TRANSFER CASE REAR OUTPUT SHAFT REAR BEARING(UPC/FNA: RETAINER,TRANSFER CASE REAR OUTPUT SHAFT REAR BEARING MODIFIER: 1991 K310,314 EXCEPT)
    --
    --
  •  
    RING, Transfer Case Make Sure These Fit  
  • RING, BEARING RETAINING
    --
    --
  • RING, CARRIER LOCK
    $9.51
    $6.07
  • RING, CHAIN DRIVEN SPROCKET RETAINER
    $4.25
    $2.71
  • RING, INPUT GEAR BEARING (2.39MM)(1988-90)(AS REQUIRED)
    $1.86
    $1.19
  • RING, INPUT SHAFT BEARING RETAINER (2.29MM)
    $8.41
    $5.36
  • RING, LOCK RETAINING
    $9.45
    $6.04
  • RING, PLANET GEAR CARRIER RETAINING
    $9.50
    $6.07
  • RING, RANGE SECTOR & SHAFT
    $9.46
    $6.04
  • RING, TRANSFER CASE FRONT OUTPUT SHAFT BEARING SNAP
    --
    --
  • RING, TRANSFER CASE HIGH/LOW INTAKE GEAR RETAINER
    $9.56
    $6.10
  • RING, TRANSFER CASE INPUT GEAR RETAINER (.095 THICK)
    $8.85
    $5.66
  • RING, TRANSFER CASE INPUT GEAR RETAINING (.064 THICK)
    --
    --
  • RING, TRANSFER CASE TWO/FOUR WHEEL DRIVE DRIVEN SPROCKET RETAINER (INSIDE DIAMETER 32.15MM,*
    --
    --
  • RING, TRANSFER CASE TWO/FOUR WHEEL DRIVE DRIVEN SPROCKET RETAINER (INSIDE DIAMETER 32.15MM,2.37 THICK)
    --
    --
  • RING, TRANSFER CASE TWO/FOUR WHEEL DRIVE DRIVEN SPROCKET RETAINER (WIDTH 1.189,INSIDE DIAMETER 1.169)
    --
    --
  •  
    RING, Transfer Case Main Drive Make Sure These Fit  
  • RING, DRIVE SYNCHRONIZER BLOCKING
    --
    --
  • RING, MAIN DRIVE SYNCHRONIZER STOP (1988-90)
    $57.12
    $36.47
  •  
    SENSOR, Computer Control Sensors Make Sure These Fit  
  • SENSOR, SPEEDOMETER
    $164.20
    $104.68
  • SENSOR, VEHICLE SPEED
    $78.01
    $43.63
  •  
    SHAFT, Transfer Case Make Sure These Fit  
  • SHAFT, Front Output
    $127.75
    $81.56
  • SHAFT, TRANSFER CASE FRONT OUTPUT(LOWER)
    --
    --
  • SHAFT, TRANSFER CASE(TYPE 241C)
    --
    --
  •  
    SPRING, Transfer Case Internal Shift Control Make Sure These Fit  
  • SPRING, POPPET (1988-89)
    --
    --
  • SPRING, SHIFT DETENT
    --
    --
  •  
    SWITCH, Transfer Case Shift Control Make Sure These Fit  
  • SWITCH, TRANSFER CASE SELECTOR(FOUR WHEEL DRIVE INDICATOR)
    $36.72
    $23.44
  • SWITCH, TRANSFER CASE SELECTOR(SWITCH, INDICATOR LIGHT)
    $31.82
    $20.32
  •  
    SYNCHRONIZER, Transfer Case Main Drive Make Sure These Fit  
  • SYNCHRONIZER, TRANSFER CASE TWO/FOUR WHEEL DRIVE (INCLUDE 29-32)
    $241.30
    $154.04
  • SYNCHRONIZER, TRANSFER CASE TWO/FOUR WHEEL DRIVE (INCLUDES 50-55)
    $253.60
    $161.90
  •  
    WASHER, Transfer Case Make Sure These Fit  
  • WASHER, HOUSING ALIGNMENT DOWEL
    $8.93
    $5.70
  • WASHER, INPUT GEAR THRUST
    $14.70
    $9.37
  • WASHER, REAR OUTPUT SHAFT FLANGE
    --
    --
  • WASHER, TRANSFER CASE PROPELLER SHAFT YOKE
    $9.33
    $5.96
  • WASHER, TRANSFER CASE PROPELLER SHAFT YOKE (1988-89)(.94 OUTSIDE DIAMETER 1.5 .60 THICK PLAIN STEEL)
    $3.51
    $2.24
  • WASHER, TRANSFER CASE PROPELLER SHAFT YOKE (1989-91)(.88ID,1.6 OUTSIDE DIAMETER,.125 THICK 1065 PLAIN STEEL)
    $9.33
    $5.96
  • WASHER, TRANSFER CASE TWO/FOUR WHEEL DRIVE DRIVEN SPROCKET THRUST(1.27ID,1.63OD,.09 TH)
    --
    --
  •  
    WHEEL, Speedometer Drive Make Sure These Fit  
  • WHEEL, VEHICLE SPEED SENSOR RELUCTOR GEAR SPEEDOMETER
    $27.62
    $17.63
  • WHEEL, VEHICLE SPEEDOMETER SENSOR
    $27.64
    $17.63
  •  
    YOKE, Universal Joint and Power Divider Make Sure These Fit  
  • YOKE, PROPELLER SHAFT TRANSFER CASE
    --
    --
  • YOKE, TRANSFER CASE PROPELLER SHAFT
    --
    --
  • YOKE, TRANSFER CASE REAR
    $389.02
    $248.35
  •  
    Standard Parts Make Sure These Fit  
  • BOLT, HEX FLANGED HEAD (M10X1.5X30, 9.8 PHOSPHATE ZINC ORGANIC)(AS REQUIRED)
    Replaced by: 11516328
    $3.37
    $2.15
  • BOLT, HEXAGON (3/8-16X5/8, ZINC COATED (DIPPED OR PLATED))(AS REQUIRED)
    $0.83
    $0.56
  • BOLT, HEXAGON (M10X1.5X27, 9.8 PHOSPHATE)(AS REQUIRED)
    $5.23
    $3.34
  • BOLT, HEXAGON (M10X1.5X35, 10.9)(AS REQUIRED)
    $2.28
    $1.46
  • BOLT, HEXAGON TAP 10X1.5X30 FULL THREAD TRIM POINT 6171M PLATE STEEL(1991 K2,3)(AS REQUIRED)(4.510)
    --
    --
  • HOSE, BULK (7/32 INCH X 25 FT)(GM-6165M)
    --
    $27.47
  • NUT, HEX FLANGED HEAD (W/NYLON INSERT)(M6X1, 9 PHOSPHATE ELECTRO ORGANIC)(AS REQUIRED)
    $1.04
    $0.66
  • NUT, PRVG TORQUE (.375-24 GM301M)(AS REQUIRED)
    $5.09
    $3.25
  • PLUG, CUP BLOCK HOLES (1.5"DIAMETER)
    $2.39
    $1.52
  • PLUG, HEADLESS SQUARE SOCKET (1/2-14, STEEL)
    $1.95
    $1.24
  • RING, EXTERNAL SNAP (1.50)
    $3.95
    $2.52
  • SCREW, FLAT HEAD CROSS RECESS TAP (8-32X1/2)(AS REQUIRED)
    --
    --
  • SCREW, HEX WASHER HEAD (M5X.8X25, 9.8)(AS REQUIRED)(ALSO PART OF 24)
    $2.16
    $1.38
Genuine GM Parts, the Right Choice
GMPartsGiant.com offers the lowest prices for genuine 1989 Chevrolet K3500 parts. Parts like Transfer Case are shipped directly from authorized GM dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 6 Cyl, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 7.4L. Model Code: 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CAB CHASSIS 135.5, 3500 CAB CHASSIS 159.9, 3500 EXTENDED CAB, 3500 REGULAR CAB.
 
Item has been added to your cart!

Part No.:

Qty.

Price: $0.00

Subtotal: $0.00

This part contains hazardous material.

This part is a packaged part and contains multiple quantities of: (Pack Qty: 4)

This part is a packaged part and contains multiple quantities of the same item. In an effort to simplify packaging GM will sometimes include multiple parts in a package.