Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 10391592 Rear Spring Assembly (Rh Proc). It is sometimes referred to as Buick Coil Springs. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Buick Allure, LaCrosse models.
Affordable, reliable and built to last, GM part # 10391592 Rear Spring Assembly (Rh Proc) stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Buick parts information, click here.
×
My Garage
My Account
My Cart
Make sure this part fits your vehicle
Buick 10391592 Rear Spring Assembly (Rh Proc)
2008-2009 Buick
- Part DescriptionSpring Assembly, Rear (Rh Proc)
- PositionRear Passenger Side
- ManufacturerGeneral Motors
$17.56 MSRP: $31.49 1
You Save: $13.93 (45%)
Ships in 1-3 Business Days
Bolt/Screw, Rear Wheel Spindle Rod10130189
Insulator, Rear Stabilizer Shaft *Green10351312
Knuckle, Rear Suspension23130695
Mount Assembly, Rear Suspension Strut10398290
Nut, Rear Stabilizer Shaft Link10293337
Rear Brake Rotor23127569
Rear Suspension Trailing Arm Assembly15820927
Washer, Rear Wheel Hub10293972
Washer, Special Ft 3.0 Min +0.4 Thick10268814
Product Specifications
Brand Genuine Buick Manufacturer Part Number 10391592 Part Description Spring Assembly, Rear (Rh Proc) Other Names Coil Spring, Spring Item Dimensions 14.3 x 6.9 x 6.7 inches Item Weight 7.40 Pounds Position Rear Passenger Side Condition New Fitment Type Direct Replacement Manufacturer General Motors SKU 10391592 Warranty This genuine GM part is guaranteed by GM's factory warranty. Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65Vehicle Fitment
Year Make Model Engine Important vehicle option details 2008-2009 Buick Allure 6 Cyl 3.6L, 6 Cyl 3.8L, 8 Cyl 5.3L CX (US)/ALLURE CX (CAN), CX 4 DOOR, CXL 4 DOOR, CXL(US)/ALLURE CXL(CAN), CXS 4 DOOR, CXS(US)/Allure CXS(CAN), SUPER SERIES 4 DOOR 2008-2009 Buick LaCrosse 6 Cyl 3.6L, 6 Cyl 3.8L, 8 Cyl 5.3L CX (US)/ALLURE CX (CAN), CX 4 DOOR, CXL 4 DOOR, CXL(US)/ALLURE CXL(CAN), CXS 4 DOOR, CXS(US)/Allure CXS(CAN), SUPER SERIES 4 DOOR
Customer Questions & Answers
- Q:I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
- A:You can Select Your Vehicle to check if 10391592 fits your vehicle.Posted by GMPartsGiant Specialist
- Q:What should you remove after supporting the lower control arm of the 2009 Buick LaCrosse? Posted by Customer
- A:Remove the lower control arm-to-knuckle nut and bolt, as well as the upper control arm-to-lower control arm link bolt.Posted by GMPartsGiant Specialist
- See expert answers on similar Coil Springs
- Q:How to disassemble and reassemble a strut and coil spring assembly on Buick LaCrosse? Posted by Customer
- A:If the struts or coil springs show signs of wear such as leaking fluid, loss of damping capability, chipped, sagging, or cracked coil springs, it is important to explore all options before starting any work. These components are not serviceable and must be replaced if a problem arises. However, there may be strut assemblies available on an exchange basis, which can save time and effort. Before disassembling the vehicle, it is recommended to check the cost and availability of parts. To disassemble, the strut and spring assembly should be removed and mounted in a vise. A spring compressor should be used to relieve pressure from the upper spring seat, and the damper shaft nut should be unscrewed while holding the shaft in place. The nut and upper mount should be removed and laid out in the order they were removed. The rubber parts of the upper mount and spring seat should be checked for cracking and deterioration, and replaced if necessary. The dust boot and rubber bump stop should be slid off the damper shaft, and the bump stop should be checked for deterioration. The compressed spring should be carefully lifted and set aside. To reassemble, the damper rod should be extended and the rubber bump stop and dust boot should be installed. The compressed coil spring should be placed onto the lower seat of the damper, with the end of the spring resting against the raised stop. The upper insulator and spring seat should be installed, followed by the upper mount and mounting nut, which should be tightened to the specified torque. The spring compressor tool can then be removed, and the strut/spring assembly can be installed.Posted by GMPartsGiant Specialist
- Q:Can the strut coil spring components be serviced if there is a problem of the 2006 Chevrolet Impala? Posted by Customer
- A:No, the strut coil spring components cannot be serviced and must be replaced if there is a problem.Posted by GMPartsGiant Specialist
- See expert answers on similar Coil Springs
- Q:How should the strut and spring assembly be removed for the 2007 Chevrolet Monte Carlo? Posted by Customer
- A:The strut and spring assembly should be removed by mounting the strut clevis bracket portion in a vise.Posted by GMPartsGiant Specialist
- See expert answers on similar Coil Springs
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
Genuine GM Part 10391592, the Right Choice
Why choose GM Parts Giant
- Dedicated Service
Your complete satisfaction is our #1 goal
- Lowest Prices
Best deals on genuine OE parts from dealerships
- Fast Delivery
Orders are processed and delivered promptly