Make sure this part fits your vehicle

Cadillac 25897647 Headlight Assembly, (W/ Front Side Marker & Parking & T/Side

2007-2014 Cadillac Escalade

GM 25897647 Headlight Assembly, (W/ Front Side Marker & Parking & T/Side
  • Part Description
    Headlamp Assembly, (W/ Front Side Marker & Parking & T/Side
  • Position
    Front
  • Manufacturer
    General Motors
Customer Questions & Answers
$281.80 MSRP: $423.20
You Save: $141.40 (34%)
1
ADD TO CART
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number25897647
    Part DescriptionHeadlamp Assembly, (W/ Front Side Marker & Parking & T/Side
    Item Dimensions22.2 x 17.4 x 12.8 inches
    Item Weight7.10 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25897647
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2014 Cadillac Escalade8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex1/2 TON, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE

Customer Questions & Answers

Q:
I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 25897647 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
How to adjust headlights on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL? Posted by Customer
A:
To adjust the headlights on a vehicle, locate the vertical adjustment screws behind each headlight housing and insert an Allen wrench into the top. There are no horizontal adjustment screws. One simple method for adjusting the headlights requires masking tape, a blank wall, and a level floor. Position masking tape vertically on the wall in relation to the vehicle centerline and the centerlines of both headlights. Then, position a horizontal tape line in relation to the centerline of all the headlights. Adjustments should be made with the vehicle parked 25 feet from the wall, sitting level, the gas tank half-full, and no heavy load in the vehicle. Starting with the low beam adjustment, position the high-intensity zone so it is two inches below the horizontal line. Adjustment is made by turning the adjusting screw clockwise to raise the beam and counterclockwise to lower the beam. With the high beams on, the high-intensity zone should be vertically centered with the exact center just below the horizontal line. It is recommended to have the headlights adjusted by a dealer service department or service station at the earliest opportunity.
Posted by GMPartsGiant Specialist
Q:
Are there any additional steps for the 2011 Chevrolet Avalanche? Posted by Customer
A:
Yes, for Avalanche, Suburban, and Tahoe models, you also need to remove the fender well liner and upper headlight housing bolts before removing the bumper cover and lower housing bolt.
Posted by GMPartsGiant Specialist
See expert answers on similar Headlight
Q:
What other tape line should you position for the 2007 Chevrolet Suburban? Posted by Customer
A:
Position a horizontal tape line in relation to the centerline of all the headlights.
Posted by GMPartsGiant Specialist
See expert answers on similar Headlight
Q:
What should you do after removing the headlight housing for the 2011 Chevrolet Tahoe? Posted by Customer
A:
After removing the headlight housing, you can proceed with the installation, which is the reverse of the removal process. Remember to adjust the headlights after installation.
Posted by GMPartsGiant Specialist
See expert answers on similar Headlight
Q:
What should you do after removing the grille or trim piece for the 2011 Chevrolet Suburban? Posted by Customer
A:
After removing the grille or trim piece, you should loosen the front wheel lug nuts.
Posted by GMPartsGiant Specialist
See expert answers on similar Headlight
Q:
What is the next step after loosening the lug nuts of the 2007 GMC Yukon? Posted by Customer
A:
The next step is to raise the vehicle and remove the front wheel and fender well liner.
Posted by GMPartsGiant Specialist
See expert answers on similar Headlight
Q:
How do you adjust the high beam headlights of the 2011 GMC Yukon? Posted by Customer
A:
With the high beams on, the high-intensity zone should be vertically centered with the exact center just below the horizontal line.
Posted by GMPartsGiant Specialist
See expert answers on similar Headlight
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25897647, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 25897647 Headlight Assembly, (W/ Front Side Marker & Parking & T/Side. It is sometimes referred to as Cadillac Headlight. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Cadillac Escalade models.

Affordable, reliable and built to last, GM part # 25897647 Headlight Assembly, (W/ Front Side Marker & Parking & T/Side stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly