Cadillac 88893282 Sensor Asm,Throttle Position

You can Select Your Vehicle to check if 88893282 fits your vehicle.

On 2006 and later models, the TP sensor is an integral component of the throttle body and is replaced as a complete unit. First, disconnect the cable from the negative battery terminal. The Idle Air Control (IAC) valve is right above the TP sensor, so it's a good idea to unplug the IAC valve electrical connector and set it aside so that it's out of the way. There are also some hoses and pipes in front of the TP sensor, but if you're careful, you'll be able to remove the TP sensor mounting screws without having to remove any of them. Next, unplug the electrical connector from the TP sensor. To detach the TP sensor from the throttle body, unplug the electrical connector and then remove the sensor mounting screws. Remove the two TP sensor mounting screws and then remove the TP sensor. Remove and discard the old TP sensor O-ring, if equipped. If the TP sensor is equipped with an O-ring, remove and discard it; to prevent air leaks, use a new O-ring even if you're installing the old TP sensor. Installation is the reverse of removal.