Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 26059675 Boot Kit,Front Wheel Drive Shaft Tri, Pot Joint. It is sometimes referred to as Chevrolet CV Boot. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Blazer, S10, Trailblazer models.
Affordable, reliable and built to last, GM part # 26059675 Boot Kit,Front Wheel Drive Shaft Tri, Pot Joint stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.
×
My Garage
My Account
My Cart
Make sure this part fits your vehicle
Chevrolet 26059675 Boot Kit,Front Wheel Drive Shaft Tri, Pot Joint
1997-2009 Chevrolet
- Part DescriptionBOOT KIT, Front Axle
- PositionFront
- ManufacturerGeneral Motors
- Manufacturer's NotesThis part is discontinued.
Product Specifications
Brand Genuine Chevrolet Manufacturer Part Number 26059675 Part Description BOOT KIT, Front Axle Other Names Boot Kit, Inner Boot Item Dimensions 6.8 x 6.1 x 6.2 inches Item Weight 1.50 Pounds Position Front Condition New Fitment Type Direct Replacement Require Quantity 2 Manufacturer General Motors SKU 26059675 Warranty This genuine GM part is guaranteed by GM's factory warranty. Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65Vehicle Fitment
Year Make Model Engine Important vehicle option details 1997-2005 Chevrolet Blazer 6 Cyl 4.3L 2 DOOR, 4 DOOR 1997-2004 Chevrolet S10 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L CREW CAB, PICKUP, PICKUP EXTENDED CAB 2002-2009 Chevrolet Trailblazer 6 Cyl 4.2L, 8 Cyl 5.3L, 8 Cyl 6.0L 4 DOOR, 4 DOOR EXT
Customer Questions & Answers
- Q:I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
- A:You can Select Your Vehicle to check if 26059675 fits your vehicle.Posted by GMPartsGiant Specialist
- Q:What is the purpose of driveaxle boots for the 2004 Chevrolet Blazer? Posted by Customer
- A:The purpose of driveaxle boots is to act as a barrier against dirt, water, and foreign material, preventing them from entering and causing damage to the constant velocity (CV) joints.Posted by GMPartsGiant Specialist
- See expert answers on similar CV Boot
- Q:How do you install the CV joint assembly for the 1996 Chevrolet Blazer? Posted by Customer
- A:To install the CV joint assembly, you need to reverse the disassembly steps, ensuring the marks on the inner race and cage are visible after installation. Pack the CV joint assembly with grease and install the boot on the driveaxle. Position the CV joint assembly on the driveaxle and drive it onto the shaft until the retaining ring is seated. Finally, install the boot and retaining clamp, and secure the seal retainer.Posted by GMPartsGiant Specialist
- See expert answers on similar CV Boot
- Q:What should be done if cracks or leaking grease are found during inspection for the 1994 Chevrolet S10? Posted by Customer
- A:If any cracks or leaking grease are found during inspection, replacement of the boots is mandatory.Posted by GMPartsGiant Specialist
- See expert answers on similar CV Boot
- Q:What is the first step to remove and replace the CV joints on a driveaxle for the 1994 Chevrolet S10? Posted by Customer
- A:The first step is to remove the driveaxle and place it in a vise lined with rags to protect the shaft.Posted by GMPartsGiant Specialist
- See expert answers on similar CV Boot
- Q:How do you remove the inner CV joint for the 1999 GMC Jimmy? Posted by Customer
- A:To remove the inner CV joint, you need to cut off the boot seal retaining clamps and slide the boot towards the center of the driveaxle. Then, remove the tri-pot housing from the spider assembly and remove the spider assembly from the axle by removing the inner and outer retaining rings.Posted by GMPartsGiant Specialist
- See expert answers on similar CV Boot
- Q:How can the driveaxle boots be inspected for the 1996 GMC Jimmy? Posted by Customer
- A:The driveaxle boots can be inspected by pushing on the boot and checking for cracks or leaking grease in the indicated area.Posted by GMPartsGiant Specialist
- See expert answers on similar CV Boot
- Q:What should be done if cracks or leaking grease are found during inspection for the 2000 GMC Sonoma? Posted by Customer
- A:If any cracks or leaking grease are found during inspection, replacement of the boots is mandatory.Posted by GMPartsGiant Specialist
- See expert answers on similar CV Boot
- Q:How do you remove the outer CV joint for the 1997 GMC Sonoma? Posted by Customer
- A:To remove the outer CV joint, you need to tap lightly around the seal retaining ring to remove it and cut off the band retaining the boot to the shaft. Then, remove the snap-ring and slide the joint assembly off.Posted by GMPartsGiant Specialist
- See expert answers on similar CV Boot
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
Genuine GM Part 26059675, the Right Choice
Why choose GM Parts Giant
- Dedicated Service
Your complete satisfaction is our #1 goal
- Lowest Prices
Best deals on genuine OE parts from dealerships
- Fast Delivery
Orders are processed and delivered promptly