Chevrolet 25790869 Clutch,Fan Blade

You can Select Your Vehicle to check if 25790869 fits your vehicle.

To remove the intake air baffle, start by removing the bolts and push pins that attach it to the radiator support. Disconnect the transmission cooler lines at the engine bracket and fan shroud, and also disconnect the electro-viscous clutch electrical connector from the shroud. Remove the upper radiator hose from the radiator, being prepared for coolant spillage. Use a large wrench to remove the fan clutch retaining nut and detach the fan clutch assembly from the engine. If the water pump pulley slips on the belt, remove the drivebelts and use a strap wrench to hold the pulley. Unclip the shroud from the radiator side panels and tilt the condenser and radiator forward, with the help of someone if needed. Lift the radiator fan and shroud as one unit, while holding the condenser and radiator in the forward position. If necessary, unbolt the fan from the clutch. When installing, tighten the fan hub nut to the appropriate torque specifications. Finally, check the coolant and add as necessary to bring it to the appropriate level.

If the fan clutch fails this check or is locked up solid, replacement is indicated.