Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 7470555 Rear Wheel Bearing (W/Wheel Speed Sensor). It is sometimes referred to as Chevrolet Wheel Bearing, Chevrolet Wheel Hub. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Malibu models.
Affordable, reliable and built to last, GM part # 7470555 Rear Wheel Bearing (W/Wheel Speed Sensor) stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.
×
My Garage
My Account
My Cart
Make sure this part fits your vehicle
Chevrolet 7470555 Rear Wheel Bearing (W/Wheel Speed Sensor)
1997-2000 Chevrolet Malibu
- Part DescriptionHub,Rear Wheel(W/Wheel Speed Sensor)
- PositionRear
- ManufacturerGeneral Motors
- Manufacturer's NotesThis part is discontinued.
Bolt,Rear Suspension Support11588419
Bolt,Wheel9595178
Bolt/Screw, Rear Brake Caliper11517639
Insulator Assembly, Rear Suspension Support Crossmember *White10397249
Insulator, Stabilizer Shaft Link6270752
Link Assembly, Rear Stabilizer Shaft25940977
Rear Leveling Shock Absorber Kit19300025
Seal,Steering Linkage Outer Tie Rod26049394
Product Specifications
Brand Genuine Chevrolet Manufacturer Part Number 7470555 Part Description Hub,Rear Wheel(W/Wheel Speed Sensor) Item Dimensions 7.2 x 7.1 x 8.6 inches Item Weight 8.80 Pounds Position Rear Condition New Fitment Type Direct Replacement Manufacturer General Motors SKU 7470555 Warranty This genuine GM part is guaranteed by GM's factory warranty. Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65Vehicle Fitment
Year Make Model Engine Important vehicle option details 1997-2000 Chevrolet Malibu 4 Cyl 2.4L, 6 Cyl 3.1L 4 DOOR, LS 4 DOOR, LX 4 DOOR
Customer Questions & Answers
- Q:Will this part number fit my car? Posted by GMPartsGiant Specialist
- A:You can Select Your Vehicle to check if 7470555 fits your vehicle.Posted by GMPartsGiant Specialist
- Q:What should be done to prevent the 2001 Cadillac DeVille from rolling? Posted by Customer
- A:The front wheels should be blocked.Posted by GMPartsGiant Specialist
- See expert answers on similar Wheel Hub
- Q:What are the final steps after installing the hub and bearing assembly for the 2002 Cadillac DeVille? Posted by Customer
- A:Install the driveaxle, if removed, and attach the control arm to the steering knuckle, if separated. Install the brake disc and caliper, and reconnect the ABS speed sensor electrical connector. Finally, install the driveaxle/hub nut, the wheel, and lower the vehicle. Tighten the lug nuts and the driveaxle/hub nut to the specified torque.Posted by GMPartsGiant Specialist
- See expert answers on similar Wheel Hub
- Q:What tool should be used to separate the hub and bearing assembly from the halfshaft for the 1991 Cadillac ElDorado? Posted by Customer
- A:Use tool J-28733-A or equivalent to separate the hub and bearing assembly from the halfshaft.Posted by GMPartsGiant Specialist
- See expert answers on similar Wheel Hub
- Q:What are the initial steps for removing and installing the hub and bearing assembly on the 1990 Cadillac ElDorado? Posted by Customer
- A:Raise and safely support the vehicle. Remove the wheel and tire assembly.Posted by GMPartsGiant Specialist
- See expert answers on similar Wheel Hub
- Q:How should the rear of the 2003 Cadillac DeVille be raised and supported? Posted by Customer
- A:The rear of the vehicle should be raised and securely supported on jackstands placed under the frame.Posted by GMPartsGiant Specialist
- See expert answers on similar Wheel Bearing
- Q:How to replace the Wheel Bearing on Oldsmobile Cutlass? Posted by Customer
- A:To remove the axleshaft and oil seal, a bearing extractor or a custom tool can be used to extract the bearing from the axle casing. Once the bearing is removed, the bearing recess should be cleaned out and the new bearing should be driven in using a piece of tubing against the outer bearing track. The new bearing should be lubricated with gear lubricant and tapped in to the full depth of its recess, ensuring that the numbers on the bearing are visible from the outer end of the casing. Finally, the old oil seal should be discarded and a new one should be installed before re-installing the axleshaft.Posted by GMPartsGiant Specialist
- Q:How can you check the front wheel bearings for the 1983 Oldsmobile Cutlass? Posted by Customer
- A:With the vehicle securely supported on jack stands, spin the wheel and check for noise, rolling resistance, or free play. Also, grab the top and bottom of the tire and move it in and out on the spindle. If it moves more than 0.005in, the bearings should be checked.Posted by GMPartsGiant Specialist
- See expert answers on similar Wheel Bearing
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
Genuine GM Part 7470555, the Right Choice
Why choose GM Parts Giant
- Dedicated Service
Your complete satisfaction is our #1 goal
- Lowest Prices
Best deals on genuine OE parts from dealerships
- Fast Delivery
Orders are processed and delivered promptly