Chevrolet 20873492 Mirror, Outside Rear View (Reflector Glass & Backing Plate)

You can Select Your Vehicle to check if 20873492 fits your vehicle.

To lift the mirror upwards towards the top of the glass, you need to remove the mirror set screw and carefully lift the mirror upwards.

The electric rearview mirrors in these models use two motors to move the glass—one for up and down adjustments and one for left-right adjustments. The control switch has a selector portion that sends voltage to the left or right side mirror.

To remove the inside mirror from its mount, you need to remove the setscrew located at the base of the mirror stalk and then slide the mirror upwards.

If the mirrors don't operate as expected, you can perform several checks: With the ignition in the ACC position and the engine off, operate the mirror control switch through all functions for both left and right side mirrors. Listen for the sound of the electric motors inside the mirrors. If you hear the motors but the mirror glass doesn't move, there might be a problem with the drive mechanism inside the mirror. In such cases, the defective mirror must be replaced as a unit. If there is no sound coming from the mirrors and they don't operate, first check the fuses. If the fuses are okay, proceed with further diagnosis. Remove the mirror control switch and have its continuity checked by a dealer service department or qualified shop. Check the ground connections. If the mirror still doesn't work, remove the mirror and check the wires at the mirror for voltage. If there's no voltage in each switch position, check the circuit between the mirror and control switch for opens and shorts. If there is voltage, remove the mirror and test it off the vehicle with jumper wires. Replace the mirror if it fails this test.