Chevrolet 25940447 Pad Kit, Front Disc Brake

You can Select Your Vehicle to check if 25940447 fits your vehicle.

For CTS-V models with GM designation J56 calipers, follow the same steps until step 5. Instead of removing the caliper pistons, remove the brake pad support plates and secure the caliper to the suspension with wire.

To replace sliding calipers, start by removing the cap from the brake fluid reservoir and loosening the wheel lug nuts. Then, raise the end of the vehicle and support it securely on jackstands, blocking the wheels at the opposite end. Remove the wheels and inspect the brake disc carefully. If machining is necessary, remove the disc and the pads. Before disassembling the brake, wash it thoroughly with brake system cleaner and allow it to dry, making sure to position a drain pan underneath to catch any residue. When reinstalling the caliper, tighten the mounting bolts to the proper torque specifications. After completing the job, firmly depress the brake pedal a few times to bring the pads into contact with the disc. Check the level of the brake fluid and add some if necessary. Finally, carefully check the operation of the brakes before placing the vehicle back into normal service. For fixed calipers, follow the same steps but after completing the job, firmly depress the brake pedal a few times to bring the new pads into contact with the disc. Again, check the level of the brake fluid and the operation of the brakes before returning the vehicle to normal service.

pad kit, Antilock, frt &rr whl, heavy duty. correct per vin