Chevrolet 15781369 Radiator Assembly

You can Select Your Vehicle to check if 15781369 fits your vehicle.

To remove the condenser on 2007 and earlier models, unclip it. On 2009 and earlier models, remove the air conditioning condenser-to-radiator mounting bolts near the top of the radiator. On 2010 and later models, the condenser must be completely removed. Carefully lift the condenser to release the lower retaining tabs and separate it from the radiator, being careful not to damage the fins on either unit. Inspect the radiator for leaks and damage, and if necessary, use special techniques for repair. Bugs and dirt can be removed from the radiator by spraying it with a garden hose nozzle from the back side, and it should be flushed out with a garden hose before installation. Check the rubber mounts on the bottom of the radiator for wear or deterioration and replace them if needed. For installation, guide the condenser/radiator/fan assembly into position, ensuring that the rubber mounts on the bottom are properly seated into the support. Tighten the radiator and air conditioning condenser bracket bolts securely. Fill the cooling system with the proper mixture of antifreeze and water, start the engine and check for leaks. Allow the engine to reach normal operating temperature, then recheck the coolant level and add more if required. Finally, check the transaxle fluid and add more as needed.