Make sure this part fits your vehicle

Chevrolet 12474947 Seal,Transfer Case Front Output Shaft

1998-2007 Chevrolet

GM 12474947 Seal,Transfer Case Front Output Shaft
  • Part Description
    SEAL, Transfer Case
  • Position
    Front
  • Replaces
    12547656
  • Manufacturer
    General Motors
Customer Questions & Answers
$65.99 MSRP: $103.83
You Save: $37.84 (37%)
1
ADD TO CART
Ships in 1-2 Business Days
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number12474947
    Part DescriptionSEAL, Transfer Case
    Item Dimensions3.7 x 3.6 x 0.6 inches
    Item Weight0.60 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12547656
    ManufacturerGeneral Motors
    SKU12474947
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2002-2007 Chevrolet Avalanche8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 8.1L1/2 TON, 3/4 TON
    1998-1999 Chevrolet K15006 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.5L DieselK1500 EXTENDED CAB LONG BOX, K1500 EXTENDED CAB STANDARD BOX, K1500 REGULAR CAB LONG BOX, K1500 REGULAR CAB STANDARD BOX
    1998-1999 Chevrolet K25008 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.5L Diesel, 8 Cyl 7.4LK2500 CREW CAB, K2500 EXTENDED CAB LONG BOX, K2500 EXTENDED CAB STANDARD BOX, K2500 REGULAR CAB
    1999-2007 Chevrolet Silverado6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L1500 CREW CAB LONG BOX, 1500 CREW CAB STANDARD BOX, 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB SHORT BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 CREW CAB STANDARD BOX, CLASSIC 1500 EXTENDED CAB LONG BOX, CLASSIC 1500 EXTENDED CAB SHORT BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON
    1998-2007 Chevrolet Suburban8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.5L Diesel, 8 Cyl 7.4L, 8 Cyl 8.1L1/2 TON, 1500 CREW CAB, 1500 CREW CAB LONG BOX, 1500 CREW CAB STANDARD BOX, 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3/4 TON, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS EXTENDED CAB 185.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, 4 DOOR 1/2 TON, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 EXTENDED CAB LONG BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, EXT 1/2 TON, EXT 3/4 TON, XL 1/2 TON, XL 3/4 TON, YUKON/DENALI
    1998-2007 Chevrolet Tahoe8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.5L Diesel4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON

Customer Questions & Answers

Q:
I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 12474947 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
How can the oil seal be removed for the 2008 Chevrolet Avalanche? Posted by Customer
A:
The oil seal can be carefully pried out of the rear of the transmission using a seal removal tool or large screwdriver.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
How should the new seal be installed for the 2011 Chevrolet Avalanche? Posted by Customer
A:
The new seal should be driven into place with a seal driver or large socket, making sure that the outside diameter of the socket is slightly smaller than the outside diameter of the seal.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
How to remove and replace an extension housing oil seal that is causing oil leaks? Posted by Customer
A:
To remove an extension housing oil seal that is causing oil leaks, the vehicle must be raised and supported securely on jackstands. The seal is located at the rear of the transmission where the driveshaft is attached, and if it is leaking, transmission lubricant will be built up on the front of the driveshaft and may be dripping from the rear of the transmission. The driveshaft must be removed, and the oil seal can then be carefully pried out of the rear of the transmission using a seal removal tool or large screwdriver. It is important not to damage the splines on the transmission output shaft. To install a new oil seal, a seal driver or large deep socket can be used to drive it into the bore squarely and ensure it is completely seated. The splines of the transmission output shaft and the outside of the driveshaft yoke should be lubricated with lightweight grease before reinstalling the driveshaft, being careful not to damage the lip of the new seal.
Posted by GMPartsGiant Specialist
Q:
What is the final step in the process of the 2007 Chevrolet Tahoe? Posted by Customer
A:
The final step is to reassemble the vehicle in the reverse order of removal.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
What should be done before installing the new seal for the 2012 Chevrolet Suburban? Posted by Customer
A:
Before installing the new seal, the lips should be lubricated with petroleum jelly.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
How can the seal be removed for the 2010 Chevrolet Silverado? Posted by Customer
A:
The seal can be removed by prying it out with a screwdriver or seal removal tool, being careful not to damage the seal bore.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
What should be taken care of while reinstalling the driveshaft for the 2007 Chevrolet Silverado? Posted by Customer
A:
Care should be taken not to damage the lip of the new seal.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
What should be lubricated before reinstalling the driveshaft for the 2011 Chevrolet Tahoe? Posted by Customer
A:
The splines of the transmission output shaft and the outside of the driveshaft yoke should be lubricated with lightweight grease.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
How can a new oil seal be installed for the 2012 GMC Sierra? Posted by Customer
A:
A seal driver or large deep socket can be used to drive the new oil seal into the bore squarely and ensure it is completely seated.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
How can you identify if the seal is leaking for the 2009 GMC Yukon? Posted by Customer
A:
If the seal is leaking, transmission lubricant will be built up on the front of the driveshaft and may be dripping from the rear of the transmission.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
What should be done before installing the new seal for the 2013 GMC Yukon? Posted by Customer
A:
Before installing the new seal, the lips should be lubricated with petroleum jelly.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
Q:
What is the first step to remove and replace an output shaft seal on the 2011 GMC Sierra? Posted by Customer
A:
The first step is to raise the vehicle and support it securely on jackstands.
Posted by GMPartsGiant Specialist
See expert answers on similar Transfer Case Seal
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 12474947, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 12474947 Seal,Transfer Case Front Output Shaft. It is sometimes referred to as Chevrolet Transfer Case Seal. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet K2500, Silverado, Tahoe models.

Affordable, reliable and built to last, GM part # 12474947 Seal,Transfer Case Front Output Shaft stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly