Make sure this part fits your vehicle

Chevrolet 19207447 Shaft Asm,Rear Axle (RH)

2009-2012 Chevrolet Colorado

GM 19207447 Shaft Asm,Rear Axle (RH)
  • Part Description
    SHAFT, Rear Axle Drive
  • Position
    Rear Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number19207447
    Part DescriptionSHAFT, Rear Axle Drive
    Other NamesAxle Shaft
    Item Dimensions44.5 x 11.0 x 9.2 inches
    PositionRear Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU19207447
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2012 Chevrolet Colorado4 Cyl 2.9L, 5 Cyl 3.7L, 8 Cyl 5.3LCREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP

Customer Questions & Answers

Q:
I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 19207447 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
What is the next step after disconnecting the brake components and hoses for the 2009 Chevrolet Colorado? Posted by Customer
A:
After disconnecting the brake components and hoses, you should proceed to remove the brake drums.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should you do before installing the driveaxle, and what should be done with the driveaxle/hub nut during installation for the 2012 Chevrolet Colorado? Posted by Customer
A:
Before installing the driveaxle, you should lubricate the splines on the stub shaft with multi-purpose grease. During installation, a new driveaxle/hub nut should be installed and tightened to the specific torque value.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should you do before removing the wheel and brake drum for the 2007 Chevrolet Colorado? Posted by Customer
A:
Loosen the rear wheel lug nuts and raise the rear of the vehicle. Support it securely on jackstands and block the front wheels.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How is power transmitted from the front differential/axle to the front wheels for the 2010 Chevrolet Colorado? Posted by Customer
A:
Power is transmitted from the front differential/axle to the front wheels through a pair of driveaxles.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What tasks related to axleshafts can be performed for DIY work for the 2012 Chevrolet Colorado? Posted by Customer
A:
DIY work is limited to axleshaft-related tasks such as removal, installation, oil seal replacement, bearing replacement, or unit removal for professional repair or replacement.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What is the recommended course of action if a boot is damaged but the CV joint is still in good condition for the 2008 GMC Canyon? Posted by Customer
A:
If a boot is damaged but the CV joint is still in good condition, the CV joint can be disassembled, cleaned, and the boot replaced. However, if any parts are damaged, the entire driveaxle assembly must be replaced as a unit.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should you do before raising the front of the 2004 GMC Canyon and supporting it on jackstands? Posted by Customer
A:
Before raising the front of the vehicle and supporting it on jackstands, you should loosen the wheel lug nuts.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What does the front axle assembly consist of for the 2004 GMC Canyon? Posted by Customer
A:
The front axle assembly comprises a differential and two driveaxles with inner and outer constant velocity (CV) joints.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What is the next step after disconnecting the brake components and hoses for the 2004 GMC Canyon? Posted by Customer
A:
After disconnecting the brake components and hoses, you should proceed to remove the brake drums.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should you do after installing the differential cover for the 2012 GMC Canyon? Posted by Customer
A:
Tighten the bolts.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19207447, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 19207447 Shaft Asm,Rear Axle (RH). It is sometimes referred to as Chevrolet Axle Shaft. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Colorado models.

Affordable, reliable and built to last, GM part # 19207447 Shaft Asm,Rear Axle (RH) stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly