Chevrolet 92234842 Shoe Kit, Rear Parking Brake

You can Select Your Vehicle to check if 92234842 fits your vehicle.

To replace the parking brake shoes on a vehicle, start by loosening the wheel lug nuts and raising the rear of the vehicle on jackstands. Make sure to block the front wheels to prevent the vehicle from rolling. Release the parking brake and remove the wheel and the screw that secures the disc/drum to the hub. Take off the disc and check the drum portion for any cracks, score marks, deep scratches, or hard spots. If necessary, have the disc resurfaced or replace it if it is too worn. Install the brake disc/drum on the axle flange, ensuring that the parking brake shoes lightly touch the drum. Apply the parking brake a couple of times and listen for any rubbing sounds. Proceed to install the caliper bracket, rear brake pads, and caliper. Put the wheel back on and tighten the lug nuts. Check if the wheel rotates freely and apply the parking brake to ensure it does not turn. Lower the vehicle, tighten the lug nuts to the proper specifications, and carefully test the brakes before driving. After driving, check the operation of the parking brake and adjust if necessary until satisfactory action is obtained.