GM 26023794 PUMP

You can Select Your Vehicle to check if 26023794 fits your vehicle.

To remove and install the power steering pump on various Cadillac models, start by removing the serpentine drive belt and power steering fluid from the reservoir. Then, remove the reservoir mounting bolts and disengage the reservoir tubes from the adapter. Next, remove the belt tensioner and power steering pump pulley using the appropriate tools. Disconnect the pressure line fitting from the pump and remove the pump mounting bolts. Use a small prybar to disengage the return line adapter clip from the adapter and remove the adapter from the return line. To install, inspect all adapter O-rings for damage and proper positioning. Insert the return line adapter clip on the adapter and position the adapter on the pump, inserting the pump inlet tube until fully seated. Install the pump in the vehicle, making sure the return line is fully seated and retained by the adapter clip. Tighten the pump mounting bolts and pressure line fitting. Press the pulley onto the pump shaft and install the belt tensioner. Finally, fill and bleed the power steering system.