How do I remove and install a shift cable in Buick Enclave,Chevrolet Traverse and GMC Acadia?

To remove the shift cable, set the parking brake and place chocks on the wheels and remove the driver's side floor console extension panel and disconnect the shift cable end. Unclip the shift cable housing from the shift lever bracket and remove the air filter housing air inlet duct and the air filter housing. Next, disconnect the shift cable end from the ball of the transaxle shift lever arm and remove the shift cable housing retainer. Pinch the locking tabs in and remove the cable from the shift cable bracket. Finally, remove the shift cable grommet from the engine compartment firewall and pull out the shift cable from the engine compartment end to remove it from the vehicle. To install the shift cable, simply follow the reverse order of removal. Check the shift lever for correct operation in all ranges and repeat the adjustment if necessary.

Genuine Buick Enclave Shift Cable

Transmission Shift Cable

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Shift Cables found

View related parts
Buick Enclave Automatic Transmission Range Selector Lever Cable Assembly
Part Number: 23256076
- Other Name: Cable Assembly, Automatic Transmission Range Selector Lever ; Cable Assembly, A/Trns Range Sel Lvr; Control Cable, Shift Control Cable
- Replaces: 25824455, 25809651, 20922587, 22977291, 22833771, 25882560
$34.56 MSRP: $60.15
You Save: $25.59 (43%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2017 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
Less Info
View related parts
Buick Enclave Electronic Transmission Range Selector Man Parking R Cable Assembly
Part Number: 84363603
- Other Name: Cable Assembly, Electronic Trans Range Selector Man Parking R; Control Cable, Shift Control Cable
- Replaced by: 84862515
- Replaces: 84294304
$36.74 MSRP: $55.68
You Save: $18.94 (35%)

Add to Cart
More Info
Fits the following Vehicles:
2018 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
Less Info
View related parts
Buick Enclave Electronic Transmission Range Selector Man Parking R Cable Assembly
Part Number: 84595308
- Other Name: Cable Assembly, Elek Trans Range Sel Man Park R; Control Cable, Shift Control Cable
- Replaced by: 84862515
$37.24 MSRP: $55.68
You Save: $18.44 (34%)

Add to Cart
More Info
Fits the following Vehicles:
2019-2021 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
Less Info

Buick Enclave Shift Cable Parts Questions & Answers

Automatic Transmission Range Selector Lever Cable Assembly
23256076
Q: How do I remove and install a shift cable in Buick Enclave,Chevrolet Traverse and GMC Acadia?
A: To remove the shift cable, set the parking brake and place chocks on the wheels and remove the driver's side floor console extension panel and disconnect the shift cable end. Unclip the shift cable housing from the shift lever bracket and remove the air filter housing air inlet duct and the air filter housing. Next, disconnect the shift cable end from the ball of the transaxle shift lever arm and remove the shift cable housing retainer. Pinch the locking tabs in and remove the cable from the shift cable bracket. Finally, remove the shift cable grommet from the engine compartment firewall and pull out the shift cable from the engine compartment end to remove it from the vehicle. To install the shift cable, simply follow the reverse order of removal. Check the shift lever for correct operation in all ranges and repeat the adjustment if necessary.