Genuine Chevrolet Equinox Power Steering Pump

Power Steering Pump Unit

Enter your vehicle info to find more parts and verify fitment

  • Select Vehicle by VIN
  • Select Vehicle by Model
Select by VIN
Enter your VIN for the most accurate results.
Enter your VIN for the most accurate results.
or
Select by Model
-- Select Make --
-- Select Model --
-- Select Year --

3 Power Steering Pumps found

  • Chevrolet Equinox Power Steering Pump - 13580490
    View related parts

    Chevrolet Equinox Pump Assembly, P/S

    Part Number: 13580490
    • Other Name: PUMP, Power Steering; Power Steering Pump
    $107.51 MSRP: $255.96
    You Save: $148.45 (58%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2011-2017 Chevrolet Equinox | LT SUV, LTZ SUV | 6 Cyl 3.0L, 6 Cyl 3.6L
    Less Info
  • Chevrolet Equinox Power Steering Pump - 13577682
    View related parts

    Chevrolet Equinox Pump Assembly, P/S

    Part Number: 13577682
    • Other Name: PUMP, Power Steering; Power Steering Pump
    • Replaces: 25950529, 13576573, 13505835
    $129.01 MSRP: $255.96
    You Save: $126.95 (50%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2010-2011 Chevrolet Equinox | LT SUV, LTZ SUV | 6 Cyl 3.0L
    Less Info
  • Chevrolet Equinox Power Steering Pump - 20902363
    View related parts

    Chevrolet Equinox Pump Assembly, P/S

    Part Number: 20902363
    • Other Name: PUMP, Power Steering; Power Steering Pump
    • Replaces: 25964298, 25803117
    More Info
    Fits the following Vehicles:
    • 2008-2009 Chevrolet Equinox | SS SUV AWD, SS SUV FWD, SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.6L
    Less Info

Chevrolet Equinox Power Steering Pump Parts Questions & Answers

  • Q: How do you remove the power steering pump?
    A: To remove the power steering pump, start by removing the drivebelt and draining as much fluid as possible from the reservoir. Place a drain pan under the pump and disconnect the feed hose and pressure line, plugging or capping all openings to prevent contamination. Then, remove the pump mounting fasteners and carefully guide the pump out through the right fender well, being cautious not to spill any fluid on painted surfaces. To install the new pump, position it and secure it with the mounting fasteners, tightening them to the specified torque. Connect the pressure line and feed hose, ensuring all connections are secure. Install the drivebelt and fill the power steering reservoir with the recommended fluid. Finally, bleed the system to ensure proper operation.

Related Chevrolet Equinox Parts