How do you remove the power steering pump?

To remove the power steering pump, start by removing the drivebelt and draining as much fluid as possible from the reservoir. Place a drain pan under the pump and disconnect the feed hose and pressure line, plugging or capping all openings to prevent contamination. Then, remove the pump mounting fasteners and carefully guide the pump out through the right fender well, being cautious not to spill any fluid on painted surfaces. To install the new pump, position it and secure it with the mounting fasteners, tightening them to the specified torque. Connect the pressure line and feed hose, ensuring all connections are secure. Install the drivebelt and fill the power steering reservoir with the recommended fluid. Finally, bleed the system to ensure proper operation.

Genuine GMC Terrain Power Steering Pump

Power Steering Pump Unit

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Power Steering Pumps found

View related parts
GMC Terrain Pump Assembly, P/S
Part Number: 13580490
- Other Name: PUMP, Power Steering; Power Steering Pump
$107.51 MSRP: $255.96
You Save: $148.45 (58%)

Add to Cart
More Info
Fits the following Vehicles:
2011-2017 GMC Terrain | SLE2 SUV, SLT SUV | 6 Cyl 3.0L, 6 Cyl 3.6L
Less Info
View related parts
GMC Terrain Pump Assembly, P/S
Part Number: 13577682
- Other Name: PUMP, Power Steering; Power Steering Pump
- Replaces: 25950529, 13576573, 13505835
$129.01 MSRP: $255.96
You Save: $126.95 (50%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2011 GMC Terrain | SLE2 SUV, SLT SUV | 6 Cyl 3.0L
Less Info

GMC Terrain Power Steering Pump Parts Questions & Answers

Pump Assembly, P/S
13577682
Q: How do you remove the power steering pump?
A: To remove the power steering pump, start by removing the drivebelt and draining as much fluid as possible from the reservoir. Place a drain pan under the pump and disconnect the feed hose and pressure line, plugging or capping all openings to prevent contamination. Then, remove the pump mounting fasteners and carefully guide the pump out through the right fender well, being cautious not to spill any fluid on painted surfaces. To install the new pump, position it and secure it with the mounting fasteners, tightening them to the specified torque. Connect the pressure line and feed hose, ensuring all connections are secure. Install the drivebelt and fill the power steering reservoir with the recommended fluid. Finally, bleed the system to ensure proper operation.