Cadillac 25160561 Filter,Oil

You should clean the area around the drain plug opening before reinstalling the plug securely.

For vehicles with an Oil Life Monitor, reset it by following specific procedures based on whether the vehicle has a Driver Information Center (DIC) or not.

Performing regular oil changes is a crucial preventive maintenance task for home mechanics, as aged and contaminated engine oil can lead to premature engine wear. It is recommended to change the oil filter with every oil change for cost-effectiveness and ease of installation. Before starting the procedure, gather necessary tools, materials, clean rags, and newspapers. Warm up the engine to operating temperature and raise the vehicle securely on jackstands. Familiarize yourself with the locations of the oil drain plug and oil filter, then position a drain pan under the drain plug. Carefully remove the drain plug, allow the oil to drain, and clean the plug and the surrounding area before reinstalling it securely. Move the drain pan under the oil filter and use a wrench to loosen and remove the old filter, ensuring it's empty of oil. Compare the old and new filters for compatibility and clean the filter mounting area. Apply a light coat of clean oil to the new filter's rubber gasket and attach it following the manufacturer's tightening instructions. Lower the vehicle, locate the oil filler cap, and add the correct amount of fresh oil. Check the oil level after a few minutes and run the engine briefly before checking for leaks. Dispose of the old oil properly, as it cannot be reused. For vehicles with an Oil Life Monitor, reset it by following specific procedures based on whether the vehicle has a Driver Information Center (DIC) or not.

To remove the old oil filter, move the drain pan under it and use a filter wrench to loosen and remove it.

Proper support such as a hoist, ramps, or jackstands.