Make sure this part fits your vehicle

Cadillac 19258110 Fuel Tank Fuel Pump Module Kit

2008 Cadillac Escalade

GM 19258110 Fuel Tank Fuel Pump Module Kit
  • Part Description
    Module Kit,Fuel Tank Fuel Pump
  • Replaced By
    19368794
  • Manufacturer
    General Motors
Customer Questions & Answers
$382.49 MSRP: $803.56
You Save: $421.07 (53%)
1
ADD TO CART
Ships in 1-2 Business Days
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number19258110
    Part DescriptionModule Kit,Fuel Tank Fuel Pump
    Item Dimensions9.4 x 8.1 x 17.9 inches
    Item Weight3.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU19258110
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008 Cadillac Escalade8 Cyl 6.2L1/2 TON, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV

Customer Questions & Answers

Q:
I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 19258110 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
What should be done before removing the fuel pump/fuel level sending unit module for the 2012 Chevrolet Avalanche? Posted by Customer
A:
Before removing the fuel pump/fuel level sending unit module, you should disconnect the cable from the negative battery terminal and relieve the system fuel pressure.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What should be done after disconnecting the electrical connector and wiring harness for the 2010 Chevrolet Avalanche? Posted by Customer
A:
Remove the sensor unit from the fuel pump module.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
How can I check the operation of the fuel pump for the 2013 Chevrolet Avalanche? Posted by Customer
A:
Sit inside the vehicle with the windows closed and turn the ignition key to ON. Listen for the sound of the fuel pump as it's briefly turned on by the PCM to pressurize the fuel system prior to starting the engine.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What should be done after disconnecting the electrical connector and wiring harness for the 2010 Chevrolet Suburban? Posted by Customer
A:
Remove the sensor unit from the fuel pump module.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What should be done during the installation of the fuel pump/fuel level sending unit module for the 2013 Chevrolet Suburban? Posted by Customer
A:
During the installation of the fuel pump/fuel level sending unit module, you should align the marks made on the fuel pump/fuel level sending unit flange and tank. Carefully seat the pump flange on the tank, ensuring that the float arm and float are not damaged.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
How can I measure the fuel pressure for the 2013 Chevrolet Suburban? Posted by Customer
A:
Connect a fuel pressure gauge to the Schrader valve-type test port on the fuel feed line and start the engine. Note the gauge reading as soon as the pressure stabilizes and compare it with the pressure specifications.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
Is it possible to further disassemble any components for the 2009 GMC Yukon? Posted by Customer
A:
No, further disassembly is not possible.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What steps are involved in removing the fuel pump/fuel level sending unit module for the 2012 GMC Yukon? Posted by Customer
A:
To remove the fuel pump/fuel level sending unit module, you need to remove the fuel tank and disconnect the EVAP vent line, fuel tank vent line fitting, and fuel supply line quick-connect fittings from the fuel pump/fuel level sending unit mounting flange. Then, using water pump pliers, unscrew the fuel pump/fuel level sending unit module lock ring and remove the pump assembly, taking care not to damage the fuel level sensor float arm and float.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What should I check if the fuel pump does not come on for the 2010 GMC Yukon? Posted by Customer
A:
Check the fuel pump fuse and relay, wiring back to the fuel pump, and if necessary, replace the fuel pump.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19258110, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 19258110 Fuel Tank Fuel Pump Module Kit. It is sometimes referred to as Cadillac Fuel Pump. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Cadillac Escalade models.

Affordable, reliable and built to last, GM part # 19258110 Fuel Tank Fuel Pump Module Kit stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly