Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 20955513 Front Shock Absorber Assembly. It is sometimes referred to as Chevrolet Shock Absorber. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Avalanche, Silverado, Tahoe models.
Affordable, reliable and built to last, GM part # 20955513 Front Shock Absorber Assembly stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.
×
My Garage
My Account
My Cart
Make sure this part fits your vehicle
Chevrolet 20955513 Front Shock Absorber Assembly
2011-2014 Chevrolet
- Part DescriptionAbsorber Assembly, Front Shock ; Absorber, Front And Rear Suspension
- PositionFront
- ManufacturerGeneral Motors
- Manufacturer's NotesThis part is discontinued.
Product Specifications
Brand Genuine Chevrolet Manufacturer Part Number 20955513 Part Description Absorber Assembly, Front Shock ; Absorber, Front And Rear Suspension Other Names Strut Item Dimensions 6.2 x 6.2 x 27.3 inches Item Weight 10.10 Pounds Position Front Condition New Fitment Type Direct Replacement Manufacturer General Motors SKU 20955513 Warranty This genuine GM part is guaranteed by GM's factory warranty. Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65Vehicle Fitment
Year Make Model Engine Important vehicle option details 2011-2013 Chevrolet Avalanche 8 Cyl 5.3L Flex 1/2 TON 2011-2013 Chevrolet Silverado 6 Cyl 4.3L, 8 Cyl 4.8L Flex, 8 Cyl 5.3L Flex, 8 Cyl 6.0L Flex, 8 Cyl 6.2L Flex CREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON 2011-2014 Chevrolet Suburban 8 Cyl 5.3L Flex 1/2 TON 2011-2014 Chevrolet Tahoe 8 Cyl 5.3L Flex, 8 Cyl 6.0L Flex 4 DOOR 1/2 TON
Customer Questions & Answers
- Q:I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
- A:You can Select Your Vehicle to check if 20955513 fits your vehicle.Posted by GMPartsGiant Specialist
- Q:How do you install the 2011 GMC Yukon? Posted by Customer
- A:To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:Besides leakage, what should you inspect on the shocks for the 2009 Chevrolet Avalanche? Posted by Customer
- A:Inspect the shocks to ensure they are securely mounted and undamaged. Check the upper mounts for damage and wear.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:What should be done if the 2011 Chevrolet Avalanche is equipped with a ride control system? Posted by Customer
- A:If the vehicle is equipped with a ride control system, the electrical connector and the airline should be disconnected from the shock absorber.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:How can you check for play in the steering system components for the 2010 GMC Sierra? Posted by Customer
- A:Grasp each front tire at the front and rear edges, push in at the front, pull out at the rear, and feel for play in the steering system components. If any free play is noted, check the idler arm and the tie-rod ends for looseness.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:What should be done if the 2013 Chevrolet Silverado is equipped with a ride control system? Posted by Customer
- A:If the vehicle is equipped with a ride control system, the electrical connector and the airline should be disconnected from the shock absorber.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:Besides leakage, what should you inspect on the shocks for the 2009 Chevrolet Suburban? Posted by Customer
- A:Inspect the shocks to ensure they are securely mounted and undamaged. Check the upper mounts for damage and wear.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:How do you install the 2010 Chevrolet Tahoe? Posted by Customer
- A:To install, reverse the removal steps and tighten the mounting fasteners to the torque specifications. If equipped with a suspension control system, reconnect the electrical connector to the top of the shock absorber.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:How do you remove the 2011 Chevrolet Suburban? Posted by Customer
- A:Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel. Support the outer end of the lower control arm with a floor jack and detach the tie-rod end from the steering knuckle. Remove the upper mounting nuts and the two bolts that attach the lower end of the shock absorber to the lower control arm. Pull the shock out from below.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:Why are driveaxle boots important, and what should you inspect them for for the 2007 Chevrolet Silverado? Posted by Customer
- A:Driveaxle boots are important because they prevent dirt, water, and foreign material from entering and damaging the constant velocity (CV) joints. Inspect the boots for tears, cracks, as well as loose clamps.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:What is the first step to remove the shock absorber from the 2010 Chevrolet Tahoe? Posted by Customer
- A:The first step is to raise the rear of the vehicle and support it securely on jackstands placed underneath the frame rails.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:What should be done if the 2009 Chevrolet Suburban is equipped with a ride control system? Posted by Customer
- A:If the vehicle is equipped with a ride control system, the electrical connector and the airline should be disconnected from the shock absorber.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:How do you remove the coil-over shock absorber2011 Chevrolet Silverado? Posted by Customer
- A:Start by loosening the front wheel lug nuts, raising the vehicle, and removing the wheel.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:What should be done to prevent the 2007 GMC Sierra from rolling off the stands? Posted by Customer
- A:The front wheels should be blocked to prevent the vehicle from rolling off the stands.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:What might be the issue if the 2009 Chevrolet Tahoe continues to move up and down or fails to return to its original position? Posted by Customer
- A:If the vehicle continues to move up and down or fails to return to its original position, it may indicate a worn or weak shock absorber.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:How do you remove the 2011 GMC Yukon? Posted by Customer
- A:Follow the same steps as removing the coil-over shock absorber model, but use a backup wrench on the stem to remove the upper mounting nut and related hardware. Remove the lower mounting nut and bolt, noting the direction in which the bolt points.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:What should be done to prevent the 2013 GMC Yukon from rolling off the stands? Posted by Customer
- A:The front wheels should be blocked to prevent the vehicle from rolling off the stands.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:How do you install the 2007 GMC Sierra? Posted by Customer
- A:To install, reverse the removal steps and ensure the lower mounting bolt is pointing in the same direction as before.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
- Q:What are the initial steps for inspecting 2014 GMC Yukon suspension and shocks? Posted by Customer
- A:Start by parking the vehicle on level ground, turning off the engine, and setting the parking brake. Check the tire pressures. Push down at one corner of the vehicle and then release it while noting the movement of the body. It should stop moving and come to rest in a level position within one or two bounces.Posted by GMPartsGiant Specialist
- See expert answers on similar Shock Absorber
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
Genuine GM Part 20955513, the Right Choice
Why choose GM Parts Giant
- Dedicated Service
Your complete satisfaction is our #1 goal
- Lowest Prices
Best deals on genuine OE parts from dealerships
- Fast Delivery
Orders are processed and delivered promptly