Contact Us: Live Chat or 1-888-737-9766
×
Search Bar
Search by Part Number, Part Name, Description
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Chevrolet 15830061 Axle Assembly, Rear (4.10 Ratio)

2001-2007 Chevrolet

GM 15830061 Axle Assembly, Rear (4.10 Ratio)
GM 15830061 Axle Assembly, Rear (4.10 Ratio)
  • Part Description
    AXLE, Rear Axle
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers

  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number15830061
    Part DescriptionAXLE, Rear Axle
    Item Dimensions84.6 x 23.0 x 15.6 inches
    Item Weight134.70 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15830061
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2007 Chevrolet Silverado8 Cyl 6.0L, 8 Cyl 6.6L Diesel, 8 Cyl 8.1L3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5
    2001-2004 Chevrolet Suburban8 Cyl 6.0L, 8 Cyl 8.1L3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS EXTENDED CAB 185.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5

Customer Questions & Answers

Q:
I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 15830061 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
How do you install a full-floating axle shaft for the 2010 Chevrolet Silverado? Posted by Customer
A:
To install a full-floating axle shaft, you should hold the axleshaft level to engage the splines and use a new gasket on the flange. Finally, tighten the flange bolts to the proper torque specifications.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How are the outer ends of the driveaxles connected to the front hub and bearing assembly for the 2013 Chevrolet Silverado? Posted by Customer
A:
The outer ends of the driveaxles have a stub shaft that is splined to the front hub and bearing assembly and locked in place with a large nut.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How do you remove and install components in the front differential for AWD systems for the 2008 Chevrolet Silverado? Posted by Customer
A:
To remove and install components in the front differential for AWD systems, follow these steps: Remove the stabilizer bar link and, if applicable, the front shock absorber. Unbolt the right driveaxle from the axleshaft flange, supporting it properly. Support the differential carrier with a floor jack and a block of wood. Remove nuts attaching the axle shaft to its support bracket and the bolts securing the axle shaft flange to the differential carrier. Use a brass punch and hammer to separate the axle shaft from the differential case side gear. Remove the inner axle shaft assembly and axle shaft. Replace the inner seal and bearing with a special tool, then apply RTV sealant to the differential sealing surface and install the inner axle shaft housing assembly. Install the axle shaft to the support bracket and align the splines with the differential side gear. Tap the axle shaft with a mallet until the ring (clip) aligns with the groove in the differential case side gear. Install the axle shaft to the inner flange and tighten the bolts. Reinstall the stabilizer link, fill the differential with lubricant, install the differential carrier splash shield, and finally, install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts, and check for proper operation.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done if the 2007 GMC Sierra has a differential carrier splash shield? Posted by Customer
A:
If the vehicle has a differential carrier splash shield, it should be removed after removing the driveaxle/hub nut.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How do you remove and install components in the front differential for AWD systems for the 2009 Chevrolet Silverado? Posted by Customer
A:
To remove and install components in the front differential for AWD systems, follow these steps: Remove the stabilizer bar link and, if applicable, the front shock absorber. Unbolt the right driveaxle from the axleshaft flange, supporting it properly. Support the differential carrier with a floor jack and a block of wood. Remove nuts attaching the axle shaft to its support bracket and the bolts securing the axle shaft flange to the differential carrier. Use a brass punch and hammer to separate the axle shaft from the differential case side gear. Remove the inner axle shaft assembly and axle shaft. Replace the inner seal and bearing with a special tool, then apply RTV sealant to the differential sealing surface and install the inner axle shaft housing assembly. Install the axle shaft to the support bracket and align the splines with the differential side gear. Tap the axle shaft with a mallet until the ring (clip) aligns with the groove in the differential case side gear. Install the axle shaft to the inner flange and tighten the bolts. Reinstall the stabilizer link, fill the differential with lubricant, install the differential carrier splash shield, and finally, install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts, and check for proper operation.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What steps should be followed for the 2012 GMC Sierra? Posted by Customer
A:
For leaf spring models, the spring U-bolts should be disconnected, followed by removing the springplates. Then, the jack can be lowered under the differential to remove the rear axle assembly.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What does the differential in the rear axle assembly allow for the 2010 Chevrolet Silverado? Posted by Customer
A:
The differential allows the outer rear wheel to turn at a higher speed than the inner tire when going around a corner.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done after raising and securing it on jackstands for the 2008 Chevrolet Silverado? Posted by Customer
A:
After raising the vehicle and securing it on jackstands, you should pry off the hub cover and remove the driveaxle/hub nut while bracing the hub to prevent it from rotating.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What steps should be followed for the 2012 Chevrolet Silverado? Posted by Customer
A:
For leaf spring models, the spring U-bolts should be disconnected, followed by removing the springplates. Then, the jack can be lowered under the differential to remove the rear axle assembly.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What is the next step after raising on jackstands for the 2011 GMC Sierra? Posted by Customer
A:
The next step is to drain the differential lubricant and remove the differential cover.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
Is overhauling the differential a suitable task for a do-it-yourselfer for the 2013 GMC Sierra? Posted by Customer
A:
No, overhauling the differential requires special tools and is not cost-effective for a do-it-yourselfer.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How are the inner ends of the driveaxles connected to the differential side gears for the 2009 GMC Sierra? Posted by Customer
A:
The inner ends of the driveaxles are bolted to an axleshaft connected to the differential side gears.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 15830061, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 15830061 Axle Assembly, Rear (4.10 Ratio). It is sometimes referred to as Chevrolet Axle Shaft. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Silverado, Suburban models.

Affordable, reliable and built to last, GM part # 15830061 Axle Assembly, Rear (4.10 Ratio) stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly