Make sure this part fits your vehicle

Chevrolet 20964305 Fuel Pump Flow Control Module Assembly

2013-2016 Chevrolet

GM 20964305 Fuel Pump Flow Control Module Assembly
  • Part Description
    Module Assembly, Fuel Pump Flow Control
  • Manufacturer
    General Motors
Customer Questions & Answers
$199.68 MSRP: $475.44
You Save: $275.76 (59%)
1
ADD TO CART
Ships in 1-2 Business Days
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number20964305
    Part DescriptionModule Assembly, Fuel Pump Flow Control
    Other NamesModule
    Item Dimensions10.0 x 6.7 x 3.4 inches
    Item Weight1.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU20964305
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2013 Chevrolet Avalanche8 Cyl 5.3L Flex1/2 TON
    2013-2014 Chevrolet Express8 Cyl 5.3L1/2 TON CARGO EXPRESS, 1/2 TON PASSENGER EXPRESS
    2013-2016 Chevrolet Impala6 Cyl 3.6LLS, LTZ
    2013 Chevrolet Silverado8 Cyl 4.8L Flex, 8 Cyl 5.3L Flex, 8 Cyl 6.0L Flex, 8 Cyl 6.2L FlexCREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON
    2013-2014 Chevrolet Suburban8 Cyl 5.3L Flex1/2 TON
    2013-2014 Chevrolet Tahoe8 Cyl 5.3L Flex, 8 Cyl 6.0L Flex4 DOOR 1/2 TON
    2013-2014 Chevrolet Traverse6 Cyl 3.6LSPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE AWD

Customer Questions & Answers

Q:
I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 20964305 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
How do you remove the fuel tank and fuel pump/fuel level sending unit of the 1999 Chevrolet Express? Posted by Customer
A:
Start by disconnecting the fuel level sending unit electrical connector from the fuel pump/fuel level sending unit cover.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What are the initial steps to remove the engine covers of the 2007 Chevrolet Express? Posted by Customer
A:
To remove the engine covers, you need to relieve the fuel system pressure and disconnect the cable from the negative battery terminal.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What should be done after relieving the fuel system pressure and disconnecting the battery cable of the 1996 Chevrolet Express? Posted by Customer
A:
After that, you should raise the vehicle and secure it on jackstands.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
Where is the fuel pump typically located of the 2004 Chevrolet Express? Posted by Customer
A:
The fuel pump is typically located inside the fuel tank.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What is the next step after relieving the fuel system pressure of the 2013 GMC Acadia? Posted by Customer
A:
Remove the fuel tank and disconnect the electrical and fuel supply line quick-connect fitting from the fuel pump module.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What steps are involved in removing the fuel pump/fuel level sending unit module of the 2012 GMC Sierra? Posted by Customer
A:
To remove the fuel pump/fuel level sending unit module, you need to remove the fuel tank and disconnect the EVAP vent line, fuel tank vent line fitting.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What should you do if any component is defective of the 2007 GMC Sierra? Posted by Customer
A:
The entire fuel pump module must be replaced.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
What should I do if the fuel pump runs continuously with the ignition key in the ON position of the 2013 GMC Yukon? Posted by Customer
A:
The PCM (Powertrain Control Module) may be defective and should be checked.
Posted by GMPartsGiant Specialist
Q:
What should be done before installing the fuel pump of the 2010 GMC Yukon? Posted by Customer
A:
Before installing the fuel pump, you should inspect the o-ring and replace it if necessary.
Posted by GMPartsGiant Specialist
Q:
How can I check the operation of the fuel pump of the 2007 GMC Sierra? Posted by Customer
A:
Sit inside the vehicle with the windows closed and turn the ignition key to ON. Listen for the sound of the fuel pump as it's briefly turned on by the PCM to pressurize the fuel system prior to starting the engine.
Posted by GMPartsGiant Specialist
See expert answers on similar Fuel Pump
Q:
How do you remove the high-pressure fuel pump for GMC Acadia? Posted by Customer
A:
To remove the high-pressure fuel pump, start by disconnecting the cable from the negative battery terminal and relieving the fuel system pressure. Then, disconnect the low-pressure feed line and use a flare nut wrench to unscrew the high-pressure fuel line fittings from the pump and fuel rail. Disconnect the electrical connector from the high-pressure fuel pump and remove the pump by unscrewing the bolts. Always replace the bolts and O-ring. Before installing the pump, make sure the camshaft lobe is at its base circle and lubricate the pump roller with engine oil. Install the gasket and bolts. To install the pump, set it into the cylinder head and tighten the bolts evenly to the proper torque specifications. The remaining steps involve reversing the removal process, including cleaning the high-pressure fuel line fittings, applying clean engine oil to the threads, and tightening the fittings to the correct torque specifications. Finally, reconnect the cable to the negative battery terminal, start the engine, and check for fuel leaks.
Posted by GMPartsGiant Specialist
Q:
Is it possible to further disassemble any components of the 2014 GMC Yukon? Posted by Customer
A:
No, further disassembly is not possible.
Posted by GMPartsGiant Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 20964305, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 20964305 Fuel Pump Flow Control Module Assembly. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chevrolet Impala, Silverado, Tahoe models.

Affordable, reliable and built to last, GM part # 20964305 Fuel Pump Flow Control Module Assembly stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly