How to relieve fuel system pressure and replace the fuel filter in a fuel-injected Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?

To begin, relieve the fuel system pressure. Fuel injected models have a stainless steel in-line fuel filter, which is located at the left rear of the engine on TBI engines and attached to the cylinder head. On MPFI engines, the fuel filter is connected to the frame rail or rear crossmember near the fuel tank. With the engine cold, place a container or rags under the filter. Remove the lines from the ends of the filter, then take out the attaching bolts and separate the filter. Install the new filter, ensuring it is facing the correct direction. Finally, reverse the steps for installation.

How to replace the Fuel Filter for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?

In order to separate the fuel line from the carburetor, loosen this connection at the fuel inlet nut. Once you have taken out the fuel inlet nut from your carb, remove this spring and filter. The hole end of the filter should face towards the fuel inlet nut when returning back together with the spring and filter. A fresh gasket must be put on its carb-fuel-inlet-nut before screwing it in place. Lastly, position a wrench with respect to an appropriate torque for a fuel line and lightening connector.

Genuine Buick Skylark Fuel Filter

Gas Filter

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

7 Fuel Filters found

View related parts
Buick Skylark Filter,Fuel
Part Number: 25055002
- Other Name: FILTER, Engine Fuel Filter
$12.60 MSRP: $18.75
You Save: $6.15 (33%)

Add to Cart
More Info
Fits the following Vehicles:
1982-1985 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
Less Info
View related parts
Buick Skylark Strainer,Fuel Sender Fuel
Part Number: 25055455
- Other Name: STRAINER, Fuel Tank Gage
More Info
Fits the following Vehicles:
1982-1985 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
Less Info
View related parts
Buick Skylark Strainer,Fuel Sender Fuel
Part Number: 5651702
- Other Name: FILTER, Fuel Tank Gage
More Info
Fits the following Vehicles:
1982-1985 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
Less Info
View related parts
Buick Skylark Filter Kit,Fuel
Part Number: 25171792
- Other Name: FILTER, Engine Fuel Filter; Filter, Fuel Filter
- Replaces: 25055052, 25121792, 25121915
More Info
Fits the following Vehicles:
1982-1991 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L
Less Info
View related parts
Buick Skylark Filter,Fuel
Part Number: 25121293
- Other Name: FILTER, Engine Fuel Filter; Filter, Fuel Filter
- Replaces: 25121942
More Info
Fits the following Vehicles:
1992-1998 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.3L, 4 Cyl 2.4L, 6 Cyl 3.1L, 6 Cyl 3.3L
Less Info
View related parts
Buick Skylark FILTER ASM,FUEL
Part Number: 19332546
More Info
Fits the following Vehicles:
1986-1991 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, GRAN SPORT 2 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LUXURY EDITION 4 DOOR, SKYLARK, SOMERSET, T-TYPE | 4 Cyl 2.5L, 6 Cyl 3.0L
Less Info
View related parts
Buick Skylark Filter Pkg, Fuel
Part Number: 25055083
- Other Name: FILTER, Engine Fuel Filter; Fuel Filter
$10.83 MSRP: $19.42
You Save: $8.59 (45%)
More Info
Fits the following Vehicles:
1982-1985 Buick Skylark | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L
Less Info

Buick Skylark Fuel Filter Parts Questions & Answers

Filter Kit,Fuel
25171792
Q: How to relieve fuel system pressure and replace the fuel filter in a fuel-injected Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?
A: To begin, relieve the fuel system pressure. Fuel injected models have a stainless steel in-line fuel filter, which is located at the left rear of the engine on TBI engines and attached to the cylinder head. On MPFI engines, the fuel filter is connected to the frame rail or rear crossmember near the fuel tank. With the engine cold, place a container or rags under the filter. Remove the lines from the ends of the filter, then take out the attaching bolts and separate the filter. Install the new filter, ensuring it is facing the correct direction. Finally, reverse the steps for installation.
Filter Pkg, Fuel
25055083
Q: How to replace the Fuel Filter for Buick Skylark,Oldsmobile Omega and Pontiac Phoenix?
A: In order to separate the fuel line from the carburetor, loosen this connection at the fuel inlet nut. Once you have taken out the fuel inlet nut from your carb, remove this spring and filter. The hole end of the filter should face towards the fuel inlet nut when returning back together with the spring and filter. A fresh gasket must be put on its carb-fuel-inlet-nut before screwing it in place. Lastly, position a wrench with respect to an appropriate torque for a fuel line and lightening connector.