How to replace a fuel filter in a Pontiac Grand Prix?

Relieve the fuel system pressure. Raise the vehicle and support it securely on jackstands. Unscrew the fuel line-to-fuel filter fittings. Use a back-up wrench on the fuel filter side of the fitting; use a flare-nut wrench to unscrew the outer nut. Use a back-up wrench to keep from twisting the line. If the car is equipped with plastic "quick-connect" fittings, squeeze the tabs on the fitting and pull it apart. If the car is equipped with metal quick-connect fittings, pull back the rubber boot and twist the fitting one-quarter turn to loosen any dirt. Then, if compressed air is available, blow the dirt away from the connection. Use a special fuel line separator tool to disconnect the fitting. Remove the filter from the clip. Snap the new filter securely into the clip. Make sure the arrow on the filter points toward the engine. Using new O-rings, reattach the fuel lines to the filter. Apply a few drops of clean engine oil to the O-rings to ease reassembly.

Genuine Pontiac Grand Prix Fuel Filter

Gas Filter

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

6 Fuel Filters found

View related parts
Pontiac Grand Prix Filter Assembly, Fuel
Part Number: 10337405
- Other Name: FILTER, Engine Fuel Filter; Fuel Filter
$11.87 MSRP: $52.60
You Save: $40.73 (78%)

Add to Cart
More Info
Fits the following Vehicles:
2004 Pontiac Grand Prix | GT 4 DOOR, GTP 4 DOOR | 6 Cyl 3.8L
Less Info
View related parts
Pontiac Grand Prix Strainer,Fuel Sender Fuel
Part Number: 5651702
- Other Name: FILTER, Fuel Tank Gage
More Info
Fits the following Vehicles:
1982-1984 Pontiac Grand Prix | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, LE 2 DOOR, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
Less Info
View related parts
Pontiac Grand Prix Filter Kit,Fuel
Part Number: 25171792
- Other Name: FILTER, Engine Fuel Filter; Filter, Fuel Filter
- Replaces: 25055052, 25121792, 25121915
More Info
Fits the following Vehicles:
1987-1991 Pontiac Grand Prix | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, GT 2 DOOR, LE 2 DOOR, SE 2 DOOR, SE 4 DOOR, STE 4 DOOR | 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 4.3L
Less Info
View related parts
Pontiac Grand Prix Filter,Fuel
Part Number: 25121293
- Other Name: FILTER, Engine Fuel Filter; Filter, Fuel Filter
- Replaces: 25121942
More Info
Fits the following Vehicles:
1992-2003 Pontiac Grand Prix | 2 DOOR, 4 DOOR, GT 2 DOOR, GT 4 DOOR, GTP 2 DOOR, GTP 4 DOOR, LE 4 DOOR, SE 2 DOOR, SE 4 DOOR, STE 4 DOOR | 6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 3.8L
Less Info
View related parts
Pontiac Grand Prix Filter,Fuel
Part Number: 560355
- Other Name: FILTER, Fuel; Fuel Filter
More Info
Fits the following Vehicles:
1982-1985 Pontiac Grand Prix | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, LE 2 DOOR, STATION WAGON | 8 Cyl 5.7L Diesel
Less Info
View related parts
Pontiac Grand Prix Filter,Fuel
Part Number: 25011603
- Other Name: FILTER, Engine Fuel Filter
More Info
Fits the following Vehicles:
1982-1985 Pontiac Grand Prix | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, LE 2 DOOR, STATION WAGON | 8 Cyl 5.7L Diesel
Less Info

Pontiac Grand Prix Fuel Filter Parts Questions & Answers

Filter,Fuel
25121293
Q: How to replace a fuel filter in a Pontiac Grand Prix?
A: Relieve the fuel system pressure. Raise the vehicle and support it securely on jackstands. Unscrew the fuel line-to-fuel filter fittings. Use a back-up wrench on the fuel filter side of the fitting; use a flare-nut wrench to unscrew the outer nut. Use a back-up wrench to keep from twisting the line. If the car is equipped with plastic "quick-connect" fittings, squeeze the tabs on the fitting and pull it apart. If the car is equipped with metal quick-connect fittings, pull back the rubber boot and twist the fitting one-quarter turn to loosen any dirt. Then, if compressed air is available, blow the dirt away from the connection. Use a special fuel line separator tool to disconnect the fitting. Remove the filter from the clip. Snap the new filter securely into the clip. Make sure the arrow on the filter points toward the engine. Using new O-rings, reattach the fuel lines to the filter. Apply a few drops of clean engine oil to the O-rings to ease reassembly.