How do you remove the brake switch in Cadillac DeVille,DTS and Seville?

To remove the brake switch in vehicles from 2005 and earlier, start by removing the driver's side under-dash cover. Then, locate the switch at the top of the brake pedal bracket and twist it counterclockwise to remove it from the bracket. Disconnect the electrical connector from the switch. For installation, connect the electrical connectors to the switch and push the new switch into the clip until the switch plunger is fully depressed. Rotate the switch clockwise until it locks into position and no further adjustment is needed. Ensure that the brake lights are functioning properly. The rest of the installation process is the reverse of the removal. However, for vehicles from 2006 and later, a Brake Pedal Position (BPP) sensor is used, which requires a calibration procedure performed by a dealership service department or professional repair facility equipped for the necessary programming.

Genuine Cadillac Seville Brake Light Switch

Brake Lamp Switch

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

6 Brake Light Switches found

View related parts
Cadillac Seville Switch Assembly, Stop Lamp & Cruise
Part Number: 25524845
- Other Name: SWITCH, Stop Lamp Switch; Brake Switch, Stoplamp Switch
$15.13 MSRP: $31.78
You Save: $16.65 (53%)

Add to Cart
More Info
Fits the following Vehicles:
1982-1985 Cadillac Seville | SEVILLE | 6 Cyl 4.1L, 8 Cyl 4.1L, 8 Cyl 5.7L Diesel
Less Info
View related parts
Cadillac Seville Switch,Stop Lamp & Automatic Transmission Shift Lock & Cruise Control Release
Part Number: 12450036
- Other Name: SWITCH, Stop Lamp Switch
$15.29 MSRP: $24.02
You Save: $8.73 (37%)

Add to Cart
More Info
Fits the following Vehicles:
1996-1999 Cadillac Seville | 4 DOOR, DEVILLE, SLS, STS | 8 Cyl 4.6L
Less Info
View related parts
Cadillac Seville Switch Asm,Clutch Engine Brake
Part Number: 19330547
- Other Name: SWITCH, Stop Lamp Switch; Release Switch, Stoplamp Switch, Switch
- Replaces: 25523463
$17.95 MSRP: $33.86
You Save: $15.91 (47%)

Add to Cart
More Info
Fits the following Vehicles:
1986-1991 Cadillac Seville | SEVILLE | 8 Cyl 4.1L, 8 Cyl 4.5L, 8 Cyl 4.9L
Less Info
View related parts
Cadillac Seville Switch Assembly, Stop Lamp & Automatic Transmission Shift Lock & Cruise Control
Part Number: 25668878
- Other Name: SWITCH, Stop Lamp Switch
$13.51 MSRP: $20.20
You Save: $6.69 (34%)

Add to Cart
More Info
Fits the following Vehicles:
2000-2004 Cadillac Seville | DEVILLE, HIGH LUXURY, SEVILLE, SLS, STS, TOURING 4 DOOR | 8 Cyl 4.6L
Less Info
View related parts
Cadillac Seville Switch Assembly, Stop Lamp & Automatic Transmission Shift Lock & Cruise Control
Part Number: 12450005
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch, Switch
More Info
Fits the following Vehicles:
1992-1995 Cadillac Seville | 4 DOOR, SEVILLE | 8 Cyl 4.6L, 8 Cyl 4.9L
Less Info
View related parts
Cadillac Seville Switch Assembly, Stop Lamp & Cruise
Part Number: 25529860
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch
More Info
Fits the following Vehicles:
1991 Cadillac Seville | SEVILLE | 8 Cyl 4.9L
Less Info

Cadillac Seville Brake Light Switch Parts Questions & Answers

Switch,Stop Lamp & Automatic Transmission Shift Lock & Cruise Control Release
12450036
Q: How do you remove the brake switch in Cadillac DeVille,DTS and Seville?
A: To remove the brake switch in vehicles from 2005 and earlier, start by removing the driver's side under-dash cover. Then, locate the switch at the top of the brake pedal bracket and twist it counterclockwise to remove it from the bracket. Disconnect the electrical connector from the switch. For installation, connect the electrical connectors to the switch and push the new switch into the clip until the switch plunger is fully depressed. Rotate the switch clockwise until it locks into position and no further adjustment is needed. Ensure that the brake lights are functioning properly. The rest of the installation process is the reverse of the removal. However, for vehicles from 2006 and later, a Brake Pedal Position (BPP) sensor is used, which requires a calibration procedure performed by a dealership service department or professional repair facility equipped for the necessary programming.