How to remove and replace the fuel level sending unit assembly?

Remove the fuel tank and the fuel pump module. Connect the probes of an ohmmeter to the two fuel level sensor terminals (2 and 3) of the fuel pump module electrical connector. Position the float in the down (empty) position and note the reading on the ohmmeter. Move the float up to the full position while watching the meter. If the fuel level sensor resistance does not change smoothly as the float travels from empty to full, replace the fuel level sensor assembly. Replacement: Remove the fuel tank and the fuel pump module. Disconnect the fuel level sensor electrical connector from the module cover. Disconnect the fuel pump/fuel level sensor electrical connector from the fuel pump module-inline engine. Remove the sending unit retaining clip. Remove the sending unit retaining clip-inline engine. Pinch the tabs together and slide the fuel level sensor off the module. Pinch the tabs together and remove the fuel level sensor from the module. Note the routing of the wiring for installation. Installation is the reverse of removal.

Genuine Chevrolet Colorado Fuel Level Sensor

Gas Gauge Sensor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

5 Fuel Level Sensors found

View related parts
Chevrolet Colorado Fuel Tank Meter/Pump SENSOR KIT
Part Number: 19207814
- Other Name: Sensor Kit,Fuel Level ; Sensor Kit, Fuel Tank Meter/Pump; Fuel Gauge Sending Unit, Level Sensor
$76.53 MSRP: $160.78
You Save: $84.25 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2009-2012 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.9L, 5 Cyl 3.7L, 8 Cyl 5.3L
Less Info
View related parts
Chevrolet Colorado Fuel Tank Meter/Pump SENSOR KIT
Part Number: 88965817
- Other Name: Sensor Kit,Fuel Level ; Sensor Kit, Fuel Tank Meter/Pump
$106.83 MSRP: $224.41
You Save: $117.58 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2004-2005 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.8L, 5 Cyl 3.5L
Less Info
View related parts
Chevrolet Colorado Fuel Tank Meter/Pump SENSOR KIT
Part Number: 19122011
- Other Name: Sensor Kit,Fuel Level ; Sensor Kit, Fuel Tank Meter/Pump; Level Sensor
$60.84 MSRP: $127.82
You Save: $66.98 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2006-2008 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7L
Less Info
View related parts
Chevrolet Colorado Fuel Level Sensor Kit
Part Number: 13589787
- Other Name: Sensor Kit, Fuel Level; Fuel Gauge Sending Unit, Level Sensor
$23.77 MSRP: $44.84
You Save: $21.07 (47%)

Add to Cart
More Info
Fits the following Vehicles:
2015-2021 Chevrolet Colorado | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB LS - 6'2" BOX, CREW CAB LT - 6'2" BOX, EXTENDED CAB - 6'2" BOX, LS CREW CAB - 5'2" BOX, LS EXTENDED CAB - 6'2" BOX, LT CREW CAB - 5'2" BOX, LT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.5L, 6 Cyl 3.6L
Less Info
View related parts
Chevrolet Colorado Fuel Level Sensor Kit
Part Number: 23333575
- Other Name: Sensor Kit, Fuel Level ; Sensor Kit, Fuel Lvl; Fuel Gauge Sending Unit, Level Sensor
$59.63 MSRP: $106.95
You Save: $47.32 (45%)

Add to Cart
More Info
Fits the following Vehicles:
2016-2021 Chevrolet Colorado | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB LS - 6'2" BOX, CREW CAB LT - 6'2" BOX, EXTENDED CAB - 6'2" BOX, LS CREW CAB - 5'2" BOX, LS EXTENDED CAB - 6'2" BOX, LT CREW CAB - 5'2" BOX, LT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.8L Diesel
Less Info

Chevrolet Colorado Fuel Level Sensor Parts Questions & Answers

Fuel Tank Meter/Pump SENSOR KIT
19207814
Q: How to remove and replace the fuel level sending unit assembly?
A: Remove the Fuel Tank and the Fuel Pump module. Connect the probes of an ohmmeter to the two fuel level sensor terminals (2 and 3) of the fuel pump module electrical connector. Position the float in the down (empty) position and note the reading on the ohmmeter. Move the float up to the full position while watching the meter. If the fuel level sensor resistance does not change smoothly as the float travels from empty to full, replace the fuel level sensor assembly. Replacement: Remove the fuel tank and the fuel pump module. Disconnect the fuel level sensor electrical connector from the module cover. Disconnect the fuel pump/fuel level sensor electrical connector from the fuel pump module-inline engine. Remove the sending unit retaining clip. Remove the sending unit retaining clip-inline engine. Pinch the tabs together and slide the fuel level sensor off the module. Pinch the tabs together and remove the fuel level sensor from the module. Note the routing of the wiring for installation. Installation is the reverse of removal.