How to remove and install a condenser in a Chevrolet Metro?

First, remove the grille. After that, detach the vertical brace. Dispose the auxiliary electric fan. The condenser can also be pulled out along with the fan or by itself. Disconnect the refrigerant lines from the condenser assembly. Do not twist them ensuring you use a backup wrench. Later, cover all open fittings to keep off dust and moisture. Then, unscrew it and lift it from the car cautiously avoiding oil loss on its side. To replace it follow its reverse order as given below: Insert 0.7 to 10 ounces (20 to 30 cc's) of refrigerant oil into system if new condenser was installed. The last step is to have it evacuated, charged and leak tested by the shop which discharged it.

Genuine Chevrolet Metro A/C Condenser

Air Conditioning Condenser

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 A/C Condensers found

View related parts
Chevrolet Metro Condenser
Part Number: 30008436
- Other Name: CONDENSER, A/C Condenser
More Info
Fits the following Vehicles:
1989-1993 Chevrolet Metro | 2 DOOR, 4 DOOR, CONVERTIBLE, LSI 2 DOOR, LSI 4 DOOR, LSI CONVERTIBLE, XFI 2 DOOR | 3 Cyl 1.0L, 4 Cyl 1.3L
Less Info
View related parts
Chevrolet Metro Condenser
Part Number: 96068478
- Other Name: CONDENSER, A/C Condenser
More Info
Fits the following Vehicles:
1994 Chevrolet Metro | 2 DOOR, 4 DOOR | 3 Cyl 1.0L, 4 Cyl 1.3L
Less Info
View related parts
Chevrolet Metro Condenser,A/C
Part Number: 91174026
- Other Name: CONDENSER, A/C Condenser; Condenser
More Info
Fits the following Vehicles:
1995-2001 Chevrolet Metro | 2 DOOR, 4 DOOR | 3 Cyl 1.0L, 4 Cyl 1.3L
Less Info

Chevrolet Metro A/C Condenser Parts Questions & Answers

Condenser
30008436
Q: How to remove and install a condenser in a Chevrolet Metro?
A: First, remove the grille. After that, detach the vertical brace. Dispose the auxiliary electric fan. The condenser can also be pulled out along with the fan or by itself. Disconnect the refrigerant lines from the condenser assembly. Do not twist them ensuring you use a backup wrench. Later, cover all open fittings to keep off dust and moisture. Then, unscrew it and lift it from the car cautiously avoiding oil loss on its side. To replace it follow its reverse order as given below: Insert 0.7 to 10 ounces (20 to 30 cc's) of refrigerant oil into system if new condenser was installed. The last step is to have it evacuated, charged and leak tested by the shop which discharged it.