Parts for:

 
  Cart: 0 item

Customer Support:  Customer Service - Live Chat Live Chat or Customer Service - Phone 1-888-737-9766

Parts found for 1988 Buick Regal > Engine > Engine Assembly

Part No.
Part Description

Retail
Price

Your
Price

Qty. Cart

  • ADAPTER, Engine Cooling By Pass
    ADAPTER,ENGINE COOLING BY PASS{NOTE:(10115795 HAS AIR VENT TO IMPROVE COOLANT FILL-CAPACITY)-DEALER TO DO SOME REWORK WHEN USING 10115795 IN PLACE OF 10065572(1)
    --
    --
  •  
    BOLT, Engine Cylinder Head Make Sure These Fit  
  • BOLT, CYL HEAD(M11X1.5X88)
    --
    --
  • BOLT, HEAD LG (M11X1.5X108) 10.9 PHOSPHATE ZINC ORGANIC
    $8.76
    $5.59
  • BOLT, HEAD SHT (M11X1.5X88) 10.9 PHOSPHATE ZINC ORGANIC
    $8.76
    $5.59
  •  
    BRACKET, Engine Lift Make Sure These Fit  
  • BRACKET, REAR TORQUE STRUT & ENGINE LIFT(1989)(*05)
    --
    --
  • BRACKET, REAR TORQUE STRUT & ENGINE LIFT-LH(*05)
    --
    --
  •  
    GAGE, Oil Level Make Sure These Fit  
  • GAGE, OIL LEVEL(1988-89)
    --
    --
  • GAGE, OIL LEVEL(INCORPORATES TUBULAR STAINLESS STEEL EXHAUST MANIFOLD)(1988)
    --
    --
  •  
    GUIDE, Engine Valve Push Rod Cover Make Sure These Fit  
  • GUIDE, PUSH ROD (STAMP P7)
    --
    $19.90
  • GUIDE, PUSH ROD (STAMP P8)
    --
    $20.37
  •  
    PIPE, Fuel Line Make Sure These Fit  
  • PIPE, F/RETURN FRONT/ATCH TO FUEL INJECTION RAIL
    --
    $25.92
  • PIPE, FUEL FEED(ATCH TO FUEL INJECTION RAIL)
    --
    --
  •  
    PULLEY, Fan and Coolant Pump Make Sure These Fit  
  • PULLEY, W/Pump
    $52.70
    $29.48
  • PULLEY, BELT IDLER(1988)
    $44.22
    $26.86
  •  
    SEAL, Engine Valve Make Sure These Fit  
  • SEAL, EXHAUST VALVE STEM OIL
    --
    --
  • SEAL, INTAKE VALVE STEM OIL(*01)
    --
    $17.87
  •  
    SENSOR, Computer Control Sensors Make Sure These Fit  
  • SENSOR, COOLANT TEMPERATURE (1.150)
    $34.78
    $19.45
  • SENSOR, EXHAUST OXYGEN
    $29.47
    $16.49
  •  
    SENSOR, Distributor (also Knock Sensor) Make Sure These Fit  
  • SENSOR, ELECTRONIC SPARK CONTROL KNOCK
    $100.43
    $56.16
  • SENSOR, IGNITION TIMER
    $59.96
    $33.54
  •  
    SENSOR, Engine Oil Pressure/Temperature Make Sure These Fit  
  • SENSOR, OIL PRESSURE GAGE, FUEL PUMP SWITCH(1989)
    $37.70
    $21.09
  • SENSOR, OIL PRESSURE (1 BLADE TERMINAL,1/8-27 THREAD)(1988)
    --
    --
  •  
    STUD, Generator Mounting Make Sure These Fit  
  • STUD, GENERATOR BRACKET
    --
    $12.18
  • STUD, GENERATOR BRACKET
    --
    $15.79
  • STUD, GENERATOR BRACKET(M10X1.5X25/1.5X36)
    --
    $12.18
  •  
    STUD, Intake & Exhaust Manifold Make Sure These Fit  
  • STUD, EXHAUST MANIFOLD-LH(1989)(*05)
    --
    $20.93
  • STUD, EXHAUST MANIFOLD-RH
    --
    --
  • STUD, INTAKE MANIFOLD PLENUM(M8X1.25X45)
    $3.77
    $2.53
  •  
    SWITCH, Fuel Pump Pressure Make Sure These Fit  
  • SWITCH, FUEL PUMP & ENGINE OIL PRESSURE INDICATOR(1.800)
    $29.17
    $16.31
  • SWITCH, FUEL PUMP & ENGINE OIL PRESSURE INDICATOR(3 BLADE TERMINAL,1/8-27 THREAD)(1989)
    $29.17
    $16.31
  •  
    TUBE, Engine Crankcase Ventilation Make Sure These Fit  
  • TUBE, CRANKCASE VENT VALVE(W/CONNECTORS)(201.1MM LENGTH)
    $17.85
    $11.39
  • TUBE, CRANKCASE VENT VALVE(W/O CONNECTORS)
    --
    $25.51
  • TUBE, PCV(W/CONNECTORS-201.1MM/LENGTH)(CRANKCASE VENT VALVE
    $17.85
    $11.39
  • TUBE, PCV(W/O-CONNECTORS)-(NOTE:PRESSES INTO LOWER INTAKE MANIFOLD)(CRANKCASE VENT VALVE
    --
    $25.51
  •  
    TUBE, Engine Oil Level Make Sure These Fit  
  • TUBE, OIL LEVEL GAGE(2ND DESIGN)(1989)
    $19.09
    $12.19
  • TUBE, OIL LEVEL GAGE (1ST DESIGN)(1988)
    --
    $20.77
  •  
    Standard Parts Make Sure These Fit  
  • BOLT, M10X1.5X35(AS REQUIRED)
    $2.28
    $1.46
  • BOLT, M8X1.25X25 9.8(AS REQUIRED)
    --
    --
  • BOLT, HEAVY HEXAGON HEAD,M8X1.25X12,18 O.D.,10.9,PHOSPHATE ZINC ORGANIC(AS REQUIRED)
    $5.88
    $3.75
  • BOLT, HEX FLANGED HEAD M8X1.25X35 10.9 PHOSPHATE ZINC ORGANIC(AS REQUIRED)(6.525)
    $3.51
    $2.24
  • BOLT, HEX FLANGED HEAD W/CONICAL WASHER M8X1.25X20(AS REQUIRED)
    $5.73
    $3.65
  • BOLT, HEX FLANGED HEAD, M8X1.25X20,17THD,18 O.D.,10.9,7114M(AS REQUIRED)
    $1.55
    $1.00
  • BOLT, HEX FLANGED HEAD,8X1.25X100,9.8 PLATE STEEL,17.6-OUTSIDE DIAMETER, 30MM THREAD(AS REQUIRED)
    $2.22
    $1.52
  • BOLT, HEX FLANGED HEAD,M10X1.5X16,21.5 O.D.,MACHINE POINT,9.8,7114(AS REQUIRED)
    $4.39
    $2.80
  • BOLT, HEX FLANGED HEAD,M10X1.5X30,26THD,21.5O.D.,10.9,(AS REQUIRED)
    Replaced by: 11516328
    $3.37
    $2.15
  • BOLT, HEX FLANGED HEAD,M6X1X16, 10 THREAD, 14.2 OUTSIDE DIAMETER, 8.8 STEEL, GMW3359(AS REQUIRED)
    $4.37
    $2.79
  • BOLT, HEX FLANGED HEAD,M6X1X16,13.5 THREAD,14.2 OUTSIDE DIAMETER,GMW25 STEEL,GMW3200,MACHINE,HEADER POINT(AS REQUIRED)
    $0.74
    $0.47
  • BOLT, HEX FLANGED HEAD,M6X1X25,HEADER POINT,10.9,PLATE STEEL(AS REQUIRED)
    $5.20
    $3.32
  • BOLT, HEX FLANGED HEAD,M8X1.25X45,22THD,17 O.D.,9.8(AS REQUIRED)
    $8.45
    $5.40
  • BOLT, HEX FLANGED HEAD,REDUCED BODY,M10X1.5X40,30THD,22.3 O.D.,HEADER POINT,10.9,7114M(AS REQUIRED)
    $1.78
    $1.14
  • BOLT, HEXAGON W/CONICAL WASHER,M6X1X15,12.8 O.D.,9.8,PHOSPHATE ZINC ORGANIC(AS REQUIRED)
    $3.32
    $2.12
  • BOLT, HEXAGON,M8X1.25X22,FULL THREAD,9.8,PHOSPHATE ORGANIC(CLUTCH COVER & PRESSURE PLATE)(AS REQUIRED)
    $2.16
    $1.38
  • CLAMP, WORM GEAR,14.22-26.92 DIAMETER, 13.25 THICK, STAINLESS STEEL.(AS REQUIRED)
    $3.48
    $2.22
  • CLAMP, WORM TYPE(11/16" TO 1 5/16")(AS REQUIRED)
    $4.40
    $3.05
  • CONDUIT, CONVOLUTED(1" INSIDE DIAMETER X15')R68423(AS REQUIRED)(*06)
    $67.20
    $42.90
  • NUT, HEX FLANGED HEAD,M10X1.5,11.2THK,21.5 O.D.,7111M(AS REQUIRED)
    $5.28
    $2.94
  • NUT, HEX FLANGED HEAD,M6X1,5.85THK,14.2 O.D.,10,ZINC ORGANIC(AS REQUIRED)
    $2.81
    $1.79
  • NUT, HEX FLANGED HEAD,M8X1.25,17.9 OUTSIDE DIAMETER,738 THICK,13MM HEXAGON,10, PHOSPHATE ZINC ORGANIC - FLAKE(AS REQUIRED)(8.915)
    $4.54
    $2.89
  • NUT, HEXAGON W/CONICAL WASHER,M6X1,5.7 THICK,16 OUTSIDE DIAMETER,9,GMW3200(AS REQUIRED)
    $0.57
    $0.37
  • PIN, GROOVE/F/.312X.375 CADMIUM OR ZINC PLATED (OPT); 0.375" LENGTH(AS REQUIRED)
    $0.89
    $0.56
  • PIN, M6X16,STEEL,PLAIN(AS REQUIRED)
    $4.66
    $2.96
  • PLUG, 3/8-18 DRY SEAL(AS REQUIRED)
    $5.54
    $3.53
  • PLUG, 1/4-18X0.56,STEEL,PC(AS REQUIRED)
    $10.35
    $5.80
  • PLUG, EXPANSION(CUP),0.75 OUTSIDE DIAMETER,0.26 THICK,STAINLESS STEEL,PLAIN(AS REQUIRED)
    $3.72
    $2.37
  • PLUG, HEXAGON SOCKET,1/4-18X.69,DOG POINT(AS REQUIRED)
    --
    --
  • PLUG, OIL PAN DRAIN(AS REQUIRED)(1.453)
    $6.16
    $3.93
  • RTV T-330, 3 OUNCE. CARTRIDGE(AS REQUIRED)
    $12.73
    $8.12
  • SCREW, HEX WASHER HEAD,SELF TAP,M6.3X1.81X13,13.2 O.D.,6010M,PHOSPHATE ZINC ORGANIC(AS REQUIRED)
    --
    $0.91
  • SEALANT, LOCTITE-518,50ML TUBE(AS REQUIRED)
    Replaced by: 19333510
    $34.20
    $19.15
  • WASHER, FL M6.5X18.8X1.5,GM6046M(AS REQUIRED)
    $2.09
    $1.33
  • WASHER, FLAT, 0.45" INSIDE DIAMETER, 1.75" OUTSIDE DIAMETER, 0.31" THICK, SAE 1010 STEEL, GMW3044(AS REQUIRED)
    $4.54
    $2.90
  • WASHER, HELICAL SPRING LOCK,21/64 INSIDE DIAMETER,37/64 O.D.,5/64 THICK,ZO(AS REQUIRED)
    $0.78
    $0.50
Genuine GM Parts, the Right Choice
GMPartsGiant.com offers the lowest prices for genuine 1988 Buick Regal parts. Parts like Engine Assembly are shipped directly from authorized GM dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 6 Cyl 2.8L. Model Code: CUSTOM 2 DOOR, LIMITED, REGAL.
 
Item has been added to your cart!

Part No.:

Qty.

Price: $0.00

Subtotal: $0.00

This part contains hazardous material.

This part is a packaged part and contains multiple quantities of: (Pack Qty: 4)

This part is a packaged part and contains multiple quantities of the same item. In an effort to simplify packaging GM will sometimes include multiple parts in a package.