Add a sporty appearance to the exterior of your vehicle with this GMC Performance Exhaust Tip. This Tip has a Polished Stainless Steel finish for a personalized touch. For use with 3.6L engine.
Upgrades the look and sound of your vehicle’s exhaust system
Helps to reduce restrictions in the exhaust system
Allows the engine to breathe better
Features single highly polished stainless steel 4-inch diameter tip
Includes rear muffler assembly, exhaust clamps, polished exhaust tip and other mounting hardware
Exhaust pipes run below the bumper
45% backpressure reduction at 255-g/s, based on correlated flow testing
Helps increase power by up to 10 hp and 6 lb.-ft of torque
50-state emissions legal and will not void the vehicle warranty when installed by an authorized GMC dealership
Give your Canyon increased horsepower and a more assertive sound with the GMC Performance 3.6L Cat-Back Single Exit Exhaust Upgrade System. This exhaust system offers an increase of up to 10 horsepower and 6 lb.-ft. of torque, while reducing backpressure by 45% at 255-g/s, based on correlated flow testing. Designed and validated by GMC Performance engineers, this 304 Stainless Steel Cat-Back System is tuned to maximize the performance experience while minimizing drone.This Performance Exhaust Upgrade System includes the rear muffler assembly, Y-pipe, exhaust clamps and all necessary mounting hardware. It is 50-state emissions legal and will not void the New Vehicle Limited Warranty.
Designed, engineered, tested and backed specifically for your vehicle
Exhaust tips help add a bright high-polished appearance to the exterior of your vehicle
Simple bolt-on application requires no cutting or welding to install
Built from polished stainless steel
Validated to resist corrosion and discoloration
Proven through on-vehicle, corrosion chamber and heat soak testing
Features the GMC logo
Features a dual-wall angle-cut design
Includes one 2.5L Polished Stainless Steel Single Outlet Exhaust Tip
The GMC Performance 2.5L Polished Single Outlet Angle-Cut Exhaust Tip features bright high-polished styling and enhanced engineering to keep it looking sharp for years to come. Built from polished stainless steel, each 3-Inch Polished Single Outlet Exhaust Tip has been validated to resist corrosion and discoloration while maintaining the New Vehicle Limited Warranty. Proven through on-vehicle testing under maximum load, operating temperatures of over 572°F, extreme corrosion chamber testing equivalent to 5 years and a 2-hour thermal heat soak at ~392°F, you can count on the stainless steel Exhaust Tip to look great season after season.
Specifically designed to increase exhaust tip clearance by up to 2-inches in challenging off-road conditions
Ideal for rock crawling, high-articulation scenarios, or anywhere additional clearance is required
Improves exhaust tip departure angle by 9-degrees
Works to decrease the chance of impacting the exhaust tip during off-road events
Built from 2.75-inch 304 Stainless Steel featuring a high-polish 4-inch exhaust tip
Legal in all 50 states
Will not void the New Vehicle Limited Warranty
Designed for rock crawling and off-road enthusiasts looking for maximum exhaust tip clearance the Chevrolet Performance Exhaust Tip Relocation Kit offers enhanced off-road clearance while maintaining the rest of the factory exhaust system. Built from 304 Stainless Steel, the high-clearance relocation kit features 2.75” OD tubing and a single wall high-polish 4-inch slash cut tip for great looks on and off-road. Installation of the Exhaust Tip Relocation Kit requires cutting the factory supplied system but will not void the New Vehicle Limited Warranty and is legal in all 50 states. The high-clearance system includes a clamp, 2.75-inch pipe, integrated exhaust hanger, a welded 4-inch high-polished tip, and installation instructions. This system helps increase exhaust tip ground clearance by up to 2-inches and improves the exhaust tip departure angle by up to 9-degrees. This system works to decrease the chance of impacting exhaust tip during off-road events.
Upgrades the look and sound of your vehicle’s exhaust system
Helps to reduce restrictions in the exhaust system
Allows the engine to breathe better
Features single highly polished stainless steel 4-inch diameter tip
Includes rear muffler assembly, exhaust clamps, polished exhaust tip and other mounting hardware
Exhaust pipes run below the bumper
45% backpressure reduction at 255-g/s, based on correlated flow testing
Helps increase power by up to 10 hp and 6 lb.-ft of torque
50-state emissions legal and will not void the vehicle warranty when installed by an authorized GMC dealership
Give your Canyon increased horsepower and a more assertive sound with the GMC Performance 3.6L Cat-Back Single Exit Exhaust Upgrade System. This exhaust system offers an increase of up to 10 horsepower and 6 lb.-ft. of torque, while reducing backpressure by 45% at 255-g/s, based on correlated flow testing. Designed and validated by GMC Performance engineers, this 304 Stainless Steel Cat-Back System is tuned to maximize the performance experience while minimizing drone.This Performance Exhaust Upgrade System includes the rear muffler assembly, Y-pipe, exhaust clamps and all necessary mounting hardware. It is 50-state emissions legal and will not void the New Vehicle Limited Warranty.
Specifically designed to increase exhaust tip clearance by up to 2 inches in challenging off-road conditions
Ideal for rock crawling, high-articulation scenarios, or anywhere additional clearance is required
Improves exhaust tip departure angle by 9 degrees
Works to decrease the chance of impacting the exhaust tip during off-road events
Built from 2.75-inch 304 stainless steel featuring a black-chrome 4-inch exhaust tip
Legal in all 50 states
Will not void the New Vehicle Limited Warranty
Features a Dual-Wall-Angle Cut design
Includes one 2.8L Black Chrome Single-Outlet Exhaust Tip
Designed for rock crawling and off-road enthusiasts looking for maximum exhaust tip clearance, the Chevrolet Performance Exhaust Tip Relocation Kit offers enhanced off-road clearance while maintaining the rest of the factory exhaust system. Built from 304 Stainless Steel, the high-clearance relocation kit features 2.75-inch OD tubing and a single wall high-polished 4-inch slash cut tip for great looks on and off-road. Installation of the Exhaust Tip Relocation Kit requires cutting the factory-supplied system but will not void the New Vehicle Limited Warranty and is legal in all 50 states. The high-clearance system includes a clamp, 2.75-inch pipe, integrated exhaust hanger, a welded 4-inch black-chrome tip, and installation instructions. This system helps increase exhaust tip ground clearance by up to 2 inches and improves the exhaust tip departure angle by up to 9 degrees. This system works to decrease the chance of impacting the exhaust tip during off-road events.