Why choose GMPartsGiant

  • Genuine Chevrolet Parts

    GMPartsGiant.com is the ultimate destination for genuine Chevrolet parts, ensuring reliability and compatibility with your vehicle. All our auto parts and accessories come directly from dedicated dealers and are backed by the manufacturer's warranty, giving you a risk-free shopping experience and the confidence that you're purchasing high-quality, genuine components.

  • Exceptional Customer Service

    Experience unparalleled customer service with our dedicated team, available via email, live chat, or phone to provide expert assistance. GMPartsGiant.com is committed to delivering your OEM Chevrolet parts promptly, regardless of your location in the nation. Our goal is to have your vehicle running smoothly and back on the road as quickly as possible.

  • Unbeatable Prices

    GMPartsGiant.com prides itself on offering unbeatable prices for Chevrolet parts and Chevrolet truck parts online. By shopping with us, you'll enjoy giant savings and access to a comprehensive Chevrolet parts catalog. Our vast inventory of affordable OEM Chevrolet parts and pickup parts ensures you'll find the right components to keep your vehicle in top condition.

Popular Genuine Chevrolet Parts

Genuine Chevrolet Accessories - UP TO 45% OFF MSRP

Genuine Chevrolet Accessories

Popular Chevrolet Accessories
  • Rocker Panel Molding
    Rocker Panel Molding
  • Remote Start
    Remote Start
  • Floor Mats
    Floor Mats
  • Roof Products
    Roof Products
  • Tonneau Cover
    Tonneau Cover
  • Pickup Bed Motorcycle Wheel Chock
    Pickup Bed Motorcycle Wheel Chock
  • Cargo Management System
    Cargo Management System
  • Fender Flares
    Fender Flares
  • Seat Covers
    Seat Covers
  • Bed Protection
    Bed Protection
View All Genuine GM Accessories >

Genuine Chevrolet Parts Online Store

Chevrolet, is a vital part of the General Motors group, with a renowned legacy over a century long. Chevrolet has demonstrated a clear vision of innovation, quality at the high standards. Chevrolet is known for its extensive line of cars and trucks, each adhering to Chevy's long commitment to quality for their cars and Chevy parts. Chevrolet is the epitome of innovation, offering a vast array of vehicles and original equipment manufacturer (OEM) parts, which are backed by General Motors long standing history of commitment to quality and customer satisfaction. Chevrolet has a history of developing cutting edge vehicles like the pioneering Chevy Volt in 2010.

The ingenious Chevy Bolt EV has embodied Chevrolet's commitment to creating high quality electric vehicles, achieving accolades such as the 2017 Motor Trend Car of the Year. Other classics from Chevy are, The Chevrolet Camaro which is an American icon typifying the classic muscle car. As well as the sturdy Chevy Silverado renowned for being one of the strongest and durable pickup trucks on the market. To even more mainstream models such as the Chevrolet Malibu which is an attractive midsize sedan, enjoyed by drivers and families all over the world.

Chevrolet has been known for developing mighty engines and transmissions. One of the most important engines to Chevy has been the small-block V8 engine which exemplifies Chevy's commitment to making strong, reliable, and versatile powertrains, while being compact yet delivering substantial power. As for transmissions, such as intuitive and smooth-shifting automatic transmissions found in many of their most popular models. Combining these two vital Chevy parts, transmissions along with their robust engines, ensure Chevrolet drivers experience optimal performance, durability, and fuel efficiency. Always innovating, Chevy has been a forerunner in electrical motors and advanced battery technology.

You have nothing to worry about if you choose OEM Chevy parts as they are the best you can get in terms of quality and longevity. This is because they are precisely-engineered with the meticulous specifications of the official Chevrolet factory. They have passed strict quality control tests during manufacturing, so you know they're durable and sure to fit. Obtaining Chevrolet parts, like Brakes, Rear Axle, Propeller Shaft, Wheels, Tires, Interior Trim, Front Seat Trim, Seat Belts, Front End Sheet Metal, Heater from GMPartsGiant.com would be your wise choice. We carry a huge selection of genuine Chevy parts, including Body Moldings, Sheet Metal, Rear Compartment Hardware, Roof Hardware, Transmission - Manual at unbeatable prices, which will save a lot of trouble and money as all OEM parts, such as Transfer Case, Rear Body Structure, Moldings & Trim, Cargo Stowage are backed by Chevrolet's legendary warranty. Shop GMPartsGiant today for all your Chevy parts needs!

Chevrolet Parts Questions & Answers

  • Q: How to remove and install the transmission assembly on Chevrolet Camaro?
    A: To remove the transmission, first turn the steering wheel to align the front wheels straight and lock it. Disconnect the battery, then raise the front of the vehicle and securely support it on jackstands, ensuring it is high enough for the transmission to be pulled out. For 2011 and earlier models, drain the cooling system, then remove the heater inlet and outlet tube bolts and tubes from the thermostat housing. Next, remove the exhaust system and the driveshaft, and disconnect and plug the transmission cooler lines if equipped. Disconnect the electrical connectors for the Vehicle Speed Sensor and backup light switch, then remove the clutch hydraulic line retaining clip, pull the line out, and plug it. Remove the shift knob and the shift control rod assembly, then support the transmission with an approved transmission jack. For Tremec transmissions, support the engine from above and loosen the subframe fasteners to lower the subframe slightly for access to the transmission top mounting bolts. Lower the rear of the transmission to remove the engine-to-transmission mounting bolts and disconnect any wiring harness retaining clips. Move the transmission away to disengage it from the engine block dowel pins, then carefully lower it to the floor and remove it. For installation, lubricate the input shaft with high-temperature grease, secure the transmission to the jack, raise it into position behind the engine, and carefully slide it forward to engage the input shaft with the clutch. Ensure not to use excessive force; if the input shaft does not slide into place, adjust the angle or turn the input shaft for proper engagement. Once flush with the engine, install and tighten the transmission-to-engine bolts to the specified torque. Complete the installation by reversing the removal steps, ensuring to lock the control rod pin retainers, fill the transmission with the correct fluid, and fill and bleed the clutch system.
  • Q: Should the Shock Absorber and suspension components be checked periodically to prevent excessive tire wear and handling issues on Chevrolet Express?
    A: Some recommended components that required checking include; Steering linkage & suspension because worn or damaged parts leads to high rate of tire wear, poor ride quality, handling problem, poor fuel economy. To inspect the shock absorbers, it is advisable to park the car on a flat surface, switch off the engine, apply handbrake and check the tyre pressure. Place the press on one corner of a vehicle and set it free: the car should stop moving and should take one or two bounces to become level; if it continues moving or does not become level, this may means that the shock absorber is worn out or is too weak. Make this check on the other corners, then safely lift the vehicle up on jack stands. Check the shock absorbers for any signs of leakage on the fluid; any observed fluid should be from the shocks; replace them in pairs if leaking is identified. And always ensure that the shocks are well fixed and if they have rusts or any signs of destruction replace them as a pair. During the steering and suspension check, physically inspect all these parts and look for signs of damage or distortion, and other such features as damaged seals, bushing and leakage. Lay off lower end of the steering knuckle and have someone wiggle the steering in and out; if the steering knuckle to the control arm-balljoint moves, you will want to replace the suspension ball joint(s). Last of all, take each front tire at the front and rear edges with your hands and try to move them-if there is any play in the steering system then it is best to ask for the car-checking idler arm and tie-rod ends for any looseness if play is felt.
  • Q: How to remove and replace the rear crankshaft seal in 3.4L V6 engine on Chevrolet Equinox?
    A: In this step, the transaxle should be removed, also remove the driveplate. Look at the Crankshaft Seal, oil pan, and the surface of the engine block to check for leakage since, in some cases, leakage of the oil pan gasket may give symptoms of a leaking rear Crankshaft Seal. Pay attention to the location of the old seal in order to replicate it in the installation of the new one. Use a screwdriver to pry the Crankshaft Seal off the block being very careful not to mar the crankshaft or the seal bore, the latter which has to be cleaned using a shop towel and cleaning solvent to remove any traces of oil and dirt. A tool called EN-48672 is specifically designed for removing this type of seal without harming the crankshaft or the seal bore; it can be bought at GM dealers and certain automotive toolbox stores. Get a special installation tool EN-48108, which is required for proper insertion of the new seal into place; do not take off the protector sleeve or apply any lubricant to the seal. Crankshaft and seal bore must be clean and free from any nicks or burrs which maybe done with fine crocus paper. Consult the package that the installation tool came in, fit it to the crankshaft in accordance with instructions and then screw it through. Put the new seal in place on the tool, align the drive drum over it and fit the rest of the tool parts onto the shaft, with reference to the fact that the seal is only an assembly in one direction on the tool. Rotate the nut further in order to compress the new seal tighter to the drum and also to make it come in contact with the engine block, after that, you remove the nut and look at the position of the new seal from the drum. Last put in the driveplate and the transaxle.
  • Q: How to remove and replace the rear crankshaft seal in V8 engine on Chevrolet Impala?
    A: Remove the transaxle. Next, take out the driveplate. Carefully pry the Crankshaft Seal from the rear cover using a screwdriver, ensuring not to nick or scratch the crankshaft or the seal bore. Note how far the old seal is recessed into the housing bore for proper installation depth of the new seal. Clean the seal bore thoroughly with a shop towel, removing all traces of oil and dirt. Lubricate the outside diameter of the new seal and install it over the end of the crankshaft, ensuring the lip points toward the engine. Ideally, use a seal installation tool to press the new seal into place; if unavailable, a large socket, section of pipe, or blunt tool can be used to drive the seal squarely into the bore and flush with the rear cover. Finally, install the flywheel/driveplate and then the transmission.