What are the operations for rear axle shafts with pressed wheel bearings on 1986 Chevrolet Caprice?

The operations for rear axles with pressed wheel bearings are as follows, First, raise the rear of the vehicle and remove the wheel and brake drum. Then, remove the pressed steel cover from the differential carrier to drain the oil. Next, remove the lock screw and pinion shaft. After that, remove the C-ring from the inner end of the axleshaft. Carefully withdraw the axleshaft, being mindful of the oil seal. To reinstall, follow the reverse order of removal, ensuring the lock screw is tightened to the specified torque. Always use a new cover gasket and tighten the cover bolts to the specified torque. Finally, refill the unit with the correct lubricant.

Genuine 1986 Chevrolet Caprice Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Axle Shaft found

View related parts
1986 Chevrolet Caprice Rear Axle Shaft
Part Number: 22506477
Product Specifications
- Other Name: Shaft,Rear Axle ; Shaft,R/Axl; Axle Shaft
- Position: Rear
- Item Weight: 14.70 Pounds
- Item Dimensions: 6.8 x 6.7 x 33.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22506477
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 1986 Chevrolet Caprice Submodels:
- 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel

1986 Chevrolet Caprice Axle Shaft

We are your prime source for competitively priced and high-quality OEM 1986 Chevrolet Caprice Axle Shaft. We provide you with parts that will allow you to save a lot of money without sacrificing quality. All our OEM parts are backed by the manufacturer's warranty and shipped out at a swift rate.

1986 Chevrolet Caprice Axle Shaft Parts Questions & Experts Answers

Q:
What are the operations for rear axle shafts with pressed wheel bearings on 1986 Chevrolet Caprice?
Posted by Bessie H.
A:
The operations for rear axles with pressed wheel bearings are as follows, First, raise the rear of the vehicle and remove the wheel and brake drum. Then, remove the pressed steel cover from the differential carrier to drain the oil. Next, remove the lock screw and pinion shaft. After that, remove the C-ring from the inner end of the axleshaft. Carefully withdraw the axleshaft, being mindful of the oil seal. To reinstall, follow the reverse order of removal, ensuring the lock screw is tightened to the specified torque. Always use a new cover gasket and tighten the cover bolts to the specified torque. Finally, refill the unit with the correct lubricant.
Answered by GM Parts Specialist Bob / Feb 13, 2026