Genuine 1991 Cadillac Eldorado Sway Bar Kit

Stabilizer Sway Bar Set
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

  • 1991 Cadillac Eldorado Sway Bar Kit - 1633804
    View related parts
    Product Specifications
    • Other Name: SHAFT, Stabilizer; Stabilizer Bar
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 1633804
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 1991 Cadillac Eldorado Submodels:
    • COMMERCIAL CHASSIS, ELDORADO | 8 Cyl 4.1L, 8 Cyl 4.5L, 8 Cyl 4.9L
  • 1991 Cadillac Eldorado Sway Bar Kit - 3521260
    View related parts
    Product Specifications
    • Other Name: SHAFT, Stabilizer; Stabilizer Bar
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3521260
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 1991 Cadillac Eldorado Submodels:
    • COMMERCIAL CHASSIS, ELDORADO | 8 Cyl 4.5L, 8 Cyl 4.9L
  • 1991 Cadillac Eldorado Sway Bar Kit - 3521259
    View related parts
    Product Specifications
    • Other Name: SHAFT, Stabilizer; Stabilizer Assembly, Stabilizer Bar
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3521259
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 1991 Cadillac Eldorado Submodels:
    • COMMERCIAL CHASSIS, ELDORADO | 8 Cyl 4.5L, 8 Cyl 4.6L, 8 Cyl 4.9L

1991 Cadillac Eldorado Sway Bar Kit

We are your prime source for competitively priced and high-quality OEM 1991 Cadillac Eldorado Sway Bar Kit. We provide you with parts that will allow you to save a lot of money without sacrificing quality. All our OEM parts are backed by the manufacturer's warranty and shipped out at a swift rate.

1991 Cadillac Eldorado Parts Questions & Experts Answers

  • Q: How to remove and install the front Sway Bar Kit on 1991 Cadillac ElDorado?
    A: First support the front suspension to drop and put the Eldorado and Seville securely in place before taking off the front wheel and tire on the right side. Unscrew the position sensor from the lower control arm on 4.6L vehicles using pliers or your Torx bit, make sure your ball stud stays put while you remove the links with pliers or a Torx bit. First disconnect the exhaust pipe from the manifold using the bracket bolts, then unbolt the brackets and bushings to complete taking out the Sway Bar Kit. Reassemble your vehicle by first putting the Sway Bar Kit in place, then put the exhaust pipe back onto the manifold. Make sure the bushing slits point toward the vehicle's back, put brackets and bolts on loosely, then attach the stabilizer links. Twist the bracket bolts until they reach 35 ft/lb of torque. Use pliers or a Torx bit to keep the ball stud from turning when doing this. Also set the stabilizer link nuts to 48 ft/lb of torque. To complete the job, drivers must reattach the lower control arm's road sensing suspension position sensor, attach the tire and wheel back on the right side of the vehicle, and gently lower the car back to the ground.

Related 1991 Cadillac Eldorado Parts