Genuine 1996 Chevrolet Beretta Cylinder Head

Head
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Cylinder Heads found

  • 1996 Chevrolet Beretta Cylinder Head - 12360424
    View related parts

    1996 Chevrolet Beretta Engine Cylinder Head (W/Valve)

    Part Number: 12360424
    $1008.05 MSRP: $1303.23
    You Save: $295.18 (23%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Head,Cyl(W/Valve); Cylinder Head
    • Item Weight: 30.60 Pounds
    • Item Dimensions: 21.8 x 8.8 x 6.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12360424
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 1996 Chevrolet Beretta Submodels:
    • 2 DOOR, 4 DOOR, Z26 2 DOOR | 4 Cyl 2.2L
  • 1996 Chevrolet Beretta Cylinder Head - 10154745
    View related parts
    Product Specifications
    • Other Name: Head,Cyl
    • Item Weight: 14.90 Pounds
    • Item Dimensions: 9.0 x 8.9 x 17.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 10154745
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 1996 Chevrolet Beretta Submodels:
    • 2 DOOR, 4 DOOR, Z26 2 DOOR | 6 Cyl 3.1L
  • 1996 Chevrolet Beretta Cylinder Head - 12575061
    View related parts
    Product Specifications
    • Other Name: Head Asm,Cyl ; Head, Engine Cylinder; Cylinder Head
    • Replaces: 24503767
    • Item Weight: 15.70 Pounds
    • Item Dimensions: 16.8 x 8.5 x 9.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 12575061
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 1996 Chevrolet Beretta Submodels:
    • 2 DOOR, 4 DOOR, Z26 2 DOOR | 6 Cyl 3.1L

1996 Chevrolet Beretta Cylinder Head

We are your prime source for competitively priced and high-quality OEM 1996 Chevrolet Beretta Cylinder Head. We provide you with parts that will allow you to save a lot of money without sacrificing quality. All our OEM parts are backed by the manufacturer's warranty and shipped out at a swift rate.

1996 Chevrolet Beretta Parts Questions & Experts Answers

  • Q: How to remove the cylinder head in V6 engine on 1996 Chevrolet Beretta?
    A: Disconnect the negative battery cable in order to remove the cylinder head. Additionally, if necessary, the intake manifold should be removed and the mounting bolt of oil dipstick tube taken off. Label all wires, vacuum hoses and spark plug wires for reinstallation purposes before disconnecting them. After that, remove the rocker arm cover as well as detach the pushrods and rocker arms from the exhaust manifold. Take a new head gasket and outline cylinder heads on cardboard and then loosen each cylinder head mounting bolt gradually. When lifting the head(s) off the engine be careful not to damage mating surfaces. The mating surfaces should be clean for installation and use a gasket scraper to remove old material. Look for damage and chase threads in head bolt holes. Place the new gasket on dowel pins with caution when positioning it on block. Apply Teflon pipe sealant to bolt threads and undersides of bolt heads; then tighten bolts in recommended sequence. Finally, follow through with the rest of installation steps while changing oil as well as filter.

Related 1996 Chevrolet Beretta Parts