How to remove the key lock cylinder and ignition switch?

To remove the ignition lock cylinder, first disconnect the battery cable and remove the upper and lower steering column covers. Insert the ignition key and turn it to the START position, then depress the lock cylinder release tab and pull out the cylinder. Use a screwdriver to turn the lock cylinder gear clockwise to the START position and let it spring back to the RUN position. To remove the ignition switch, first remove the ignition lock cylinder and theft deterrent control module. Disconnect the electrical connectors from the module, key alarm buzzer, and ignition switch. When installing the switch, ensure the gears are positioned correctly to avoid alignment issues. The remainder of installation is the reverse of removal.

Genuine Chevrolet Avalanche Ignition Switch

Starter Ignition Switch

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Ignition Switches found

View related parts
Chevrolet Avalanche Switch Assembly, Ignition & Start
Part Number: 22887691
- Other Name: SWITCH, Ignition Switch; Ignition Switch
- Replaced by: 85636870
$23.65 MSRP: $44.62
You Save: $20.97 (47%)

Add to Cart
More Info
Fits the following Vehicles:
2007-2013 Chevrolet Avalanche | 1/2 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L
Less Info
View related parts
Chevrolet Avalanche Switch Asm,Ignition & Start
Part Number: 26098763
- Other Name: SWITCH, Ignition Switch; Ignition Switch
- Replaces: 26070110
More Info
Fits the following Vehicles:
2002 Chevrolet Avalanche | 1/2 TON, 3/4 TON | 8 Cyl 5.3L, 8 Cyl 8.1L
Less Info
View related parts
Chevrolet Avalanche Switch Asm,Ignition & Start
Part Number: 26098764
- Other Name: SWITCH, Ignition Switch; Ignition Switch
- Replaces: 26078650
More Info
Fits the following Vehicles:
2002 Chevrolet Avalanche | 1/2 TON, 3/4 TON | 8 Cyl 5.3L, 8 Cyl 8.1L
Less Info

Chevrolet Avalanche Ignition Switch Parts Questions & Answers

Switch Assembly, Ignition & Start
22887691
Q: How to remove the key lock cylinder and ignition switch?
A: To remove the ignition lock cylinder, first disconnect the battery cable and remove the upper and lower steering column covers. Insert the ignition key and turn it to the START position, then depress the lock cylinder release tab and pull out the cylinder. Use a screwdriver to turn the lock cylinder gear clockwise to the START position and let it spring back to the RUN position. To remove the ignition switch, first remove the ignition lock cylinder and theft deterrent control module. Disconnect the electrical connectors from the module, key alarm buzzer, and ignition switch. When installing the switch, ensure the gears are positioned correctly to avoid alignment issues. The remainder of installation is the reverse of removal.