How to replace Vapor Canister,Canister Purge Valves and Fuel Pressure Sensor on Buick Enclave?

To remove the fuel tank pressure sensor, take out the fuel tank, disconnect the connector, and remove the sensor from the fuel pump module. To remove the EVAP canister, raise the vehicle, remove the fuel tank, disconnect the connector and hoses from the canister on top of the tank, and remove the retainer and the canister. Installation is the reverse of removal.

Genuine Buick Enclave Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Canister Purge Valves found

View related parts
Buick Enclave Evap Emission Canister Purge Solenoid Valve Assembly
Part Number: 12630282
$36.00 MSRP: $74.36
You Save: $38.36 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control; Purge Control Valve, Purge Solenoid, Purge Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Valve Assembly, Evap Emis Cnstr Purge Sol
Part Number: 12690512
$27.52 MSRP: $51.92
You Save: $24.40 (47%)
ADD TO CART
Product Specifications
- Other Name: Purge Control Valve, Purge Solenoid, Purge Valve
- Replaced by: 12737252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2019 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV, SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Buick Enclave SOLENOID ASM-EVAP EMIS CNSTR
Part Number: 85123399
$39.32 MSRP: $80.20
You Save: $40.88 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 84802774, 84065747, 22740537
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave VALVE ASM,EVAP EMIS CNSTR PURGE SOL
Part Number: 19432156
$52.03 MSRP: $106.14
You Save: $54.11 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 19435149
- Replaces: 12591334, 12611801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

Buick Enclave Canister Purge Valves

Buick Enclave Canister Purge Valves capture fuel vapors and route them into the engine, cutting harmful hydrocarbon emissions while supporting smooth combustion. Sitting between the charcoal canister and the intake manifold, these Canister Purge Valves open when engine vacuum is available, drawing fresh air through the canister so stored vapors mix with the air fuel charge instead of leaking into the sky. Early vehicles vented tanks directly, but modern Buick models use sealed EVAP hardware, and the updated Enclave editions add an electronically controlled solenoid style Canister Purge Valves allowing the engine control module to test system integrity by closing the matching vent valve and watching for vacuum with a tank pressure sensor. During this self test the Canister Purge Valves modulate to confirm no leaks, and a loose gas cap often triggers a warning if vacuum is not achieved. Earlier mechanical designs relied solely on simple manifold vacuum signals, whereas newer electrically actuated Canister Purge Valves respond to computer commands, giving quicker reaction times and better diagnostics for the Enclave. Consistent operation keeps Buick fuel economy stable, reduces smog, and helps the Enclave meet strict emission standards.

Each OEM Buick Enclave Canister Purge Valves we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Enclave Canister Purge Valves Parts Questions & Experts Answers

Valve,Evap Emission Canister Purge Solenoid
12611801
Q: How to replace Vapor Canister,Canister Purge Valves and Fuel Pressure Sensor on Buick Enclave?
A:
To remove the fuel tank pressure sensor, take out the fuel tank, disconnect the connector, and remove the sensor from the fuel pump module. To remove the EVAP canister, raise the vehicle, remove the fuel tank, disconnect the connector and hoses from the canister on top of the tank, and remove the retainer and the canister. Installation is the reverse of removal.