How do you remove and install the CKP sensor in a Buick Enclave,Chevrolet Traverse and GMC Acadia?

Raise the front of the vehicle and support it securely on jackstands. Remove the heal shield covering the wiring harness and sensor. Disconnect the electrical connector from the CKP sensor, which is located at the rear of the engine block on the firewall side. Unscrew the mounting fastener and remove the CKP sensor. Before installing the sensor, lubricate the O-ring with clean engine oil. Installation is otherwise the reverse of removal.

Genuine Buick Enclave Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Crankshaft Position Sensors found

View related parts
Buick Enclave Sensor Assembly, Crankshaft Position
Part Number: 12615626
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
$16.05 MSRP: $30.30
You Save: $14.25 (48%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2017 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
Less Info
View related parts
Buick Enclave Sensor,Crankshaft Position
Part Number: 12613030
- Other Name: SENSOR, Distributor (also Knock Sensor)
- Replaces: 12590991
$33.77 MSRP: $63.73
You Save: $29.96 (48%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2009 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
Less Info
View related parts
Buick Enclave Sensor Assembly, Crankshaft Position
Part Number: 12664495
- Other Name: Sensor Assembly, Cr/Shf Posn; Crankshaft Position Sensor, Crankshaft Sensor
$15.74 MSRP: $29.70
You Save: $13.96 (48%)

Add to Cart
More Info
Fits the following Vehicles:
2018-2021 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
Less Info

Buick Enclave Crankshaft Position Sensor Parts Questions & Answers

Sensor Assembly, Crankshaft Position
12615626
Q: How do you remove and install the CKP sensor in a Buick Enclave,Chevrolet Traverse and GMC Acadia?
A: Raise the front of the vehicle and support it securely on jackstands. Remove the heal shield covering the wiring harness and sensor. Disconnect the electrical connector from the CKP sensor, which is located at the rear of the engine block on the firewall side. Unscrew the mounting fastener and remove the CKP sensor. Before installing the sensor, lubricate the O-ring with clean engine oil. Installation is otherwise the reverse of removal.