How to remove and install Hood Cable and Hood Latch on Buick Enclave?

To remove the latch, open the hood and remove the sight shield. Scribe a line around the latch for alignment. Remove the retaining bolts securing the latch to the radiator support and disconnect the remote start connector and hood release cable. For installation, reverse the removal steps. To remove the cable, open the hood and remove the sight shield and air filter. Remove the cable from the latch and bracket, and remove the driver's side instrument panel cover. Release the cable from the retainer and slide the end out of the handle. Finally, pull the cable through from inside the vehicle. Installation is the reverse of removal.

Genuine Buick Enclave Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hood Cables found

View related parts
Buick Enclave Cable Assembly, Hood Secondary Latch Release
Part Number: 84215989
$33.31 MSRP: $49.79
You Save: $16.48 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Secd Lat Rel; Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Handle Assembly, Hood Primary Latch Release Cable
Part Number: 23177207
$47.79 MSRP: $71.45
You Save: $23.66 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Hood Latch; Release Cable, Release Handle
- Replaces: 15939049, 20810982, 20793771
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2017 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Buick Enclave Cable Assembly, Hood Prim Lat Rel *Black
Part Number: 84378497
$33.35 MSRP: $49.86
You Save: $16.51 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Replaces: 84078029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Cable Assembly, Hood Secd Lat Rel
Part Number: 84868680
$32.41 MSRP: $48.46
You Save: $16.05 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Handle Assembly, Hood Primary Latch Release Cable *188Cm
Part Number: 20793772
Product Specifications
- Other Name: HANDLE, Hood Latch; Release Cable, Release Handle
- Replaces: 15118906
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

Buick Enclave Hood Cable

The Buick Enclave Hood Cable helps drivers pop the hood rapidly by connecting the cabin release handle to the twin latch junction to facilitate easy access to the engine bay for routine checks and repairs. This braided steel line runs within a protective sheath. When the driver pulls the lever, the inner wire slips forward, pulling the latch and releasing the Hood Cable for its secondary safety catch. Earlier Buick Enclave models were based on a single continuous Hood Cable connecting directly from the dash lever to the main latch, but in later versions, the main Hood Cable was split with a primary one running to a junction block and two shorter branches to each latch for a more even and smooth pull. No matter what configuration your Buick has, heat, moisture, and cracked outer coating can stretch or seize the Hood Cable, and the hood may stick in place. Regular inspection and timely replacement protect reliable openings and have every Enclave owner prepared for quick fluid top-offs and other under-the-hood chores.

Each OEM Buick Enclave Hood Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Enclave Hood Cable Parts Questions & Experts Answers

Handle Assembly, Hood Primary Latch Release Cable
23177207
Q: How to remove and install Hood Cable and Hood Latch on Buick Enclave?
A:
To remove the latch, open the hood and remove the sight shield. Scribe a line around the latch for alignment. Remove the retaining bolts securing the latch to the radiator support and disconnect the remote start connector and hood release cable. For installation, reverse the removal steps. To remove the cable, open the hood and remove the sight shield and air filter. Remove the cable from the latch and bracket, and remove the driver's side instrument panel cover. Release the cable from the retainer and slide the end out of the handle. Finally, pull the cable through from inside the vehicle. Installation is the reverse of removal.