What Are the Maintenance and Repair Procedures for Secondary Air Injection Pump on Buick Regal?

AIR system used in models from 1975 to 1980 pumps compressed air into the exhaust system around the exhaust valves so as to help in burning the unburned exhaust gases; it comprises of air injection pump/hoses/valves/tubes directing the air to the exhaust manifolds. Adjustments as applied to carburetors and distributors are uniquely different for AIR engines and these components are not interchangeable with typical engines. A alternates between closing off the air entering the engine to stop backfiring when manifold vacuum rises and uses a diverter value at cruising to channel air through the pump muffler and expels it by a relief valve at high rpms. Check valves are used in the system to prevent exhaust gases from entering the pump, and the AIR system used in the 231 V6 engines has some differences in this aspect. The efficiency of the system depends on the idle speed, ignition timing and dwell, which must be checked from time to time and the hoses and fitting must be checked for wear and tightness and the drive belt for wear and tension every one year or every 12,000miles. As for access to the air pump: disconnect the air hoses, secure the pump pulley, loosen the mounting bracket bolt, remove the drive belt, unbolt the pump mounting bolts and then remove the pump; installation is the reverse of removal. Subsequently, for the diverter valve, the vacuum sensing line and other hoses need to be disconnected, and then the valve is unbolted from the connection, the original gasket must be replaced with a new one and then nuts and bolts must be tightened to around 85 INCH LBS.

Genuine Buick Regal Secondary Air Injection Pump

Secondary Smog Air Injection Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Secondary Air Injection Pumps found

View related parts
Buick Regal Pump Assembly, Secondary Air Injection (W/ Bracket)
Part Number: 12634644
$190.21 MSRP: $388.02
You Save: $197.81 (51%)
ADD TO CART
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2012 Buick Regal | CXL 4 DOOR SEDAN | 4 Cyl 2.4L
View related parts
Buick Regal Pump Assembly, Secondary Air Injection (W/ Bracket)
Part Number: 12630667
$161.10 MSRP: $328.64
You Save: $167.54 (51%)
ADD TO CART
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump, Injector Pump, Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2014 Buick Regal | CXL 4 DOOR SEDAN | 4 Cyl 2.4L
View related parts
Buick Regal Pump Assembly, Secondary Air Injection
Part Number: 12568241
$223.08 MSRP: $455.06
You Save: $231.98 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump, Air Pump, Pump
- Replaces: 24507964
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Buick Regal | CUSTOM, LIMITED, LS | 6 Cyl 3.8L
View related parts
Buick Regal Pump Asm,Secondary Air Injection
Part Number: 7835397
$190.63 MSRP: $329.48
You Save: $138.85 (43%)
ADD TO CART
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump, Air Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.1L, 8 Cyl 5.0L
View related parts
Buick Regal Pump Assembly, Air Injector
Part Number: 7838575
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Buick Regal | REGAL | 8 Cyl 5.0L
View related parts
Buick Regal PUMP
Part Number: 7836179
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1983 Buick Regal | 2 DOOR, 4 DOOR, STATION WAGON | 6 Cyl 3.8L
View related parts
Buick Regal Pump, Air Injection Reactor Pump And Multi, Function Air Compressor
Part Number: 7836944
Product Specifications
- Other Name: A.I.R. Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1983 Buick Regal | 2 DOOR, 4 DOOR, STATION WAGON | 6 Cyl 3.8L
View related parts
Buick Regal Pump Assembly, Secondary Air Injection
Part Number: 12572176
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump, Air Pump, Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003 Buick Regal | LS | 6 Cyl 3.8L
View related parts
Buick Regal Pump Assembly, Air Injector
Part Number: 7849160
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL | 6 Cyl 3.8L
View related parts
Buick Regal Pump Assembly, Air Injection
Part Number: 7849156
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 6 Cyl 3.1L
View related parts
Buick Regal Pump Assembly, Air Injector
Part Number: 7849159
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi, Function Air Compressor; A.I.R. Pump, Air Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Buick Regal | REGAL | 8 Cyl 5.0L

Buick Regal Secondary Air Injection Pump

The Secondary Air Injection Pump in Buick Regal vehicles and needed for job in the Air Injection Reactor (AIR) system to provide fresh air into exhaust system as to oxidized unburned fuel which helps to decrease HC and CO emission. Usually this system comprises an electric or a belt-driven air pump, an air control valve in addition to several check valves and it controls the flow of air depending on the temperature and status of the engine. This Secondary Air Injection Pump is applied in Buick Regal models to inject air into the exhaust ports in the course of expediting warm-up in a bid to minimize emissions. When the engine is warm the air injection system switches to supplying air to the catalytic converter. Although there could be a range of modifications in various models of Buick Regal, which manufacture the Secondary Air Injection Pump, its main work remains predominant, the enhancement of efficacy of the exhaust emission decrease and preventing backfire during deceleration via the help of diverter and check valves.

Each OEM Buick Regal Secondary Air Injection Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Regal Secondary Air Injection Pump Parts Questions & Experts Answers

PUMP
7836179
Q: What Are the Maintenance and Repair Procedures for Secondary Air Injection Pump on Buick Regal?
A:
AIR system used in models from 1975 to 1980 pumps compressed air into the exhaust system around the exhaust valves so as to help in burning the unburned exhaust gases; it comprises of air injection pump/hoses/valves/tubes directing the air to the exhaust manifolds. Adjustments as applied to carburetors and distributors are uniquely different for AIR engines and these components are not interchangeable with typical engines. A alternates between closing off the air entering the engine to stop backfiring when manifold vacuum rises and uses a diverter value at cruising to channel air through the pump muffler and expels it by a relief valve at high rpms. Check valves are used in the system to prevent exhaust gases from entering the pump, and the AIR system used in the 231 V6 engines has some differences in this aspect. The efficiency of the system depends on the idle speed, ignition timing and dwell, which must be checked from time to time and the hoses and fitting must be checked for wear and tightness and the drive belt for wear and tension every one year or every 12,000miles. As for access to the air pump: disconnect the air hoses, secure the pump pulley, loosen the mounting bracket bolt, remove the drive belt, unbolt the pump mounting bolts and then remove the pump; installation is the reverse of removal. Subsequently, for the diverter valve, the vacuum sensing line and other hoses need to be disconnected, and then the valve is unbolted from the connection, the original gasket must be replaced with a new one and then nuts and bolts must be tightened to around 85 INCH LBS.

Related Buick Regal Parts

Browse by Year