My Garage
My Account
Cart
Genuine Buick Skylark Hood Cable
Hood Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Hood Cables found
Buick Skylark Hood Primary Latch Release Cable Assembly Black
Part Number: 10270780$43.20 MSRP: $52.26You Save: $9.06 (18%)Ships in 1-2 Business Days
Buick Skylark Hood Cable
The Buick Skylark Hood Cable allows drivers to pop the hood with a simple tug on the cabin release for quick access to the engine bay for checks or repairs. Running from that plastic lever to a junction block near the grille, the Hood Cable then branches off into shorter leads that reach each latch, so one pull would release both catch points at once. Over the production years of the midsize Buick, two main layouts appeared, an early single-strand design that curved directly to the left latch and a later dual-segment setup in which a primary Hood Cable linked the lever to a splitter and two secondary strands handled the individual locks. The dual system provides redundancy and easier travel, but any style can fray or stretch when outer sheathing cracks and allows water to seep inside. Signs of trouble on a Skylark are a floppy release handle or a hood stuck tight, both of which indicate a seized Hood Cable that can no longer pull the spring-loaded latch. Regular inspection and rapid replacement keep the Skylark easy to service as a responsive Hood Cable is the only connection between your fingers and the safety catch. Owners of classic Buick models are grateful for this simple part as it serves to protect valuable engine parts from rain by ensuring that the hood can be firmly held closed yet open on demand.
Each OEM Buick Skylark Hood Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Buick Skylark Hood Cable Parts Questions & Experts Answers
- Q: How to remove and install the hood cable assembly on Buick Skylark?A:The Hood Latch cable is a one-piece assembly that includes the pull handle, control cable, and housing. To remove it, raise the hood and disengage the cable from the primary hood latch assembly, taking precautions to prevent the hood from closing and locking while the cable is disconnected. Unclip the cable from the body and remove the left shroud side trim panel located to the left of the driver's seat. Disengage the control assembly housing from the cable handle cut-out in the trim panel and remove the cable assembly from the panel, then withdraw the cable through the firewall. Installation follows the reverse of the removal procedure, ensuring that the sealing grommet attached to the dash panel is in place during installation.
